<Command format>
<Response format>
When processing is performed normally
When processing is not performed normally
7
<Parameters explanation>
Measurement
result
Completes continuous measurement
Continuous measurement ends.
<Command format>
<Response format>
When processing is performed normally
When processing is not performed normally
Note
To output measurement results, insert a [Data Output] processing unit in the scene.
●
When the scene does not have a [Data Output] processing unit, only a command response is output.
Reference:
Reference:
488
Controlling/Outputting through Serial Communication (Non-procedure)
The measurement results from the number of times continuous measurement is performed are
output as a response.
Reference:
Output Format (Non-procedure) (p.519)
Output Format (Non-procedure) (p.519)
"Processing Item List Manual", "Data Output" (p.574)
FZ4 User's Manual