Omron FZ4 Series User Manual page 350

Scene
6
Select startup mode
Measurement manager bar
state
Operation priority
Measurement initialization
priority
348 Setting the System Operation Environment
Setting value
Item [Factory
default]
Checked
Specify
startup
scene,
[Unchecked]
scene group
Scene groups
Scene 0 to 31
Group [Scene group
0]
Scenes 0 to
Scene 31
[Scene 0]
[ADJUST]
●
RUN
●
[Open]
●
Close
●
[Measurement
result priority]
Menu
operation
priority
[Measurement
trigger receipt
priority]
Processing of
re-drawing on
screen priority
Description
The selected scene/scene group will be the scene/
scene group during start-up.
The scene/scene group set in the controller when
"Data save" is executed will be the scene/scene
group at start-up.
Selects the scene group displayed during start-up.
Selects the scene displayed during start-up.
Selects whether the ADJUST window or RUN window
is displayed during start-up.
Selects whether to display the measurement
manager bar during start-up.
Specifies whether measurement results display or
menu operation is to have priority.
Measurement results display processing is prioritized.
Menu operation will be harder to receive due to its
lowered priority status.
Menu operation is prioritized. Measurement results
display may be incomplete.
Measurement initialization is performed immediately
after scene switching or flow editing. Whether
measurement trigger reception or screen re-drawing
processing has priority during measurement
initialization can be specified.
Measurement trigger reception is prioritized even
during measurement initialization processing. Display
for screen re-drawing processing may be incomplete
due to its lowered priority status.
Screen re-drawing processing is prioritized.
Measurement triggers will not be received until screen
re-drawing processing is complete.
FZ4 User's Manual