Omron FZ4 Series User Manual page 480

When processing is not performed normally
(Parameters explanation)
Display image
window
number
Magnification
(Example)
When zooming in display image display window "1" to 200%
<Command>
7
<Response>
IMGSAVE
Saves image data.
<Command format>
<Response format>
When processing is performed normally
When processing is not performed normally
<Parameters explanation>
Image data
No.
478 Controlling/Outputting through Serial Communication (Non-procedure)
Specify the number of the display image window, whose display position and display zoom ratio
are returned to their default values (0 to 15).
Reference: Display image window numbers (p.467)
Sets the zoom ratio (250-16000).
250 means 25%; 16000 means 1600%.
Specifies the No. of the image data to be saved (0 to max. number of logging images (I_MAX)).
The maximum number of logging images can be a number with a maximum of 3 digits.The number
of images will vary depending on the controller used and the camera connected. The image data
number of the latest image is 0.
Reference: About Number of Logging Images (p.611)
FZ4 User's Manual