Omron FZ4 Series User Manual page 481

Specifies the save destination and file name during saving with a definite path (ex.:
\USBDisk\abc.IFZ, E:\abc.IFZ).
Save destinations include directories under the following systems.Be sure to attach an "IFZ"
extension to the file name.
Save
destination
Save destination
RAMDisk
USBDisk
Important
If the specified file name already exists, this existing file will be overwritten
●
Do not turn off power to the controller until there is a response.
●
(Example)
When the image data of image data No. 3 is saved with the file name "LABEL1.IFZ" in the "IMG01"
folder in the USB memory to which the drive name "USBDisk2" is assigned
<Command>
<Response>
INPUTTRANSSTATE or ITS
Getting communication module input states
Gets the input state (permitted/prohibited) for communication modules.
<Command format>
or
(Response format)
When processing is performed normally
FZ4 User's Manual
FZ4-1100 series
C:\Data\RAMDisk
E:\,F:\,G:\,H:\
Controlling/Outputting through Serial Communication (Non-procedure)
FZ-L35 /600/700 series
\RAMDISK
\USBDisk to \USBDisk3
7
479