Table of Contents
Advertisement
Saving Settings Data to RAMDisk/USB Device
Saves the setting data file to the RAM Disk or USB memory. The data that can be saved is as follows.
Data
System data
(*.ini)
Scene data
(*.scn)
Scene group data
(*.sgp)
System + Scene group 0
data
5
(*.bkd)
Important
During saving, do not restart, turn off power or remove the USB memory.Data will be corrupted and the system
●
will not work properly at the next start-up. It is especially necessary to pay attention when "Save to file" is being
performed for system + scene group 0 data, as the data being saved will also be saved to the controller flash
memory at the same time.
Note
When "Save to file" is executed, the data to save is also saved in the controller (except Scene Group Data 1 to
●
31).
1.
When saving to USB memory, plug a USB memory device into the controller.
2.
On the Main screen, tap [Data] - [Save to file].
The Save to File window is displayed.
3.
Tap [Setting data] and select the data to save.
4.
When scene data is selected, tap [
5.
Specify the save destination folder and file name.
334
Saving Settings Data to RAMDisk/USB Device
Settings data, such as the [System] menu settings contents, which is shared within the
controller
Data for each scene. Sequence of units set in each scene and setting values of units
within scenes.
The data of scene group with 32 scenes.
Data combining the system data and the data from Scene Group 0.
] to select the scene number that is to be the save target.
Description
FZ4 User's Manual
Advertisement
Table of Contents
