Omron FZ4 Series User Manual page 315

System data
Identification
enableDhcp
ipAddress
subnetMask
defaultGateway
dns
destIpAddress
portNo
PLC Link data
commandArea
commandMemoryAddress
responseArea
responseMemoryAddress
outputArea
outputMemoryAddress
handshake
responseTimeout
Area classification
Area classification name
Data register
File register
Link register
Supported functions
IoInitialize
GetPort
PutPort
BusyOut
JudgeOut
RunOut
GetAll
PutAll
ReceiveData
SendData
SendString
ReadPlcMemory
WritePlcMemory
SetPlcData
GetPlcData
FZ4 User's Manual
Meaning
Enable DHCP
0:Disabled
1:Enabled
IP address of the system
Subnet mask
Gateway address
DNS server address
Output IP address
Input port No
Command area Area
Command area Address
Response area Area
Response area Address
Data Output area Area
Data Output area Address
handshaking
Retry interval [ms]
○ －
○
Reference:
○
Reference:
× －
× －
× －
○
Reference:
○
Reference:
○
Reference:
○
Reference:
○
Reference:
○
Reference: Begin to read data from designated memory of the PLC (p.251)
○
Reference: Write in data at designated storage device of the PLC (p.296)
○
Reference:
○
Reference:
Classification code
168
175
180
Input terminal a point input (p.214)
Output terminal a point output (p.250)
Input terminal all point input (p.210)
Output terminal all point output (p.249)
Receive data (p.252)
Send data (p.267)
Sends string (p.268)
Set PLC the write data (p.271)
Gets PLC the read data (p.213)
Using Custom Command
Initial value
0
10.5.5.100
255.255.255.0
10.5.5.110
10.5.5.1
0.0.0.0
9600
Data register
0
Data register
100
Data register
200
1
10000
313
4