Omron FZ4 Series User Manual page 514

<Parameters explanation>
Save
destination
Important
If the specified file name already exists, this existing file will be overwritten
●
Do not turn off power to the controller until there is a response.
●
For the FZ4-1100 series, do not save to a non-volatile area on the C drive (such as C:\ProgramFiles\FZ). This
●
would reduce the storage area for scene data etc. and make correct operation impossible.
(Example)
7
When saving system data in the file named "LABEL.INI" in the "IMG01" folder in the USB memory to
which the drive name "USBDisk2" is assigned
<Command>
<Response>
TIMER or TMR
Issues the specified command string after a specified delay.
<Command format>
or
(Response format)
When processing is performed normally
512 Controlling/Outputting through Serial Communication (Non-procedure)
Specifies the save destination and file name during saving with a definite path (ex.:
\USBDisk\abc.ini, E:\abc.ini).
Save destinations include directories under the following systems.Be sure to attach an "INI"
extension to the file name.
Save destination
RAMDisk C:\Data\RAMDisk
USBDisk E:\,F:\,G:\,H:\
FZ4-1100 series FZ-L35 /600/700 series
\RAMDISK
\USBDisk to \USBDisk3
FZ4 User's Manual