Omron FZ4 Series User Manual page 492

or
(Response format)
When processing is performed normally
When processing is not performed normally
(Parameters explanation)
Source scene
7
number
Target scene
number
(Example)
The following sample command moves the scene data saved under scene 2 to scene 10:
<Command>
<Response>
OPELOGCOND or OLC
Gets logging operation state
Gets the logging operation state.
<Command format>
or
(Response format)
When processing is performed normally
490 Controlling/Outputting through Serial Communication (Non-procedure)
Specifies the scene number to copy scene data from: 0 to the number of the scenes in the scene
group minus one.
Specifies the target scene number for copying scene data: 0 to the number of the scenes in the
scene group minus one.
FZ4 User's Manual