Omron FZ4 Series User Manual page 513

<Parameters explanation>
Specifies the name of the file to be read with a definite path (ex.: \USBDisk\abc.ini, E:\abc.ini).
Only files that are under the following systems and have an "INI" extension can be read.
File name of
Load to
system data
RAMDisk
USBDisk
Important
Do not turn off power to the controller until there is a response.
●
(Example)
When "LABEL.INI" in the "IMG01" folder of the USB memory to which the drive name "USBDisk2" is
assigned is loaded
<Command>
<Response>
SYSSAVE
Saves system data.
<Command format>
<Response format>
When processing is performed normally
When processing is not performed normally
FZ4 User's Manual
FZ4-1100 series
C:\Data\RAMDisk
E:\,F:\,G:\,H:\
Controlling/Outputting through Serial Communication (Non-procedure)
FZ-L35 /600/700 series
\RAMDISK
\USBDisk to \USBDisk3
7
511