Table of Contents
Advertisement
Editor's Note
Page Format
Index label
Indicates the section number and title.
Section 3
Setting Banks
Setting Banks
The ZFV Series can hold up to eight sets of settings. These settings can be switched
externally when changing the device setup
A set of these settings is called a "bank."
Switching banks
BANK 1 is selected as the default. BANK 2 and 8 are also available.
BANKs can also be switched from an external device.
Setting the bank switching method
MENU mode-[BANK]
Setting
BANK 1~BANK 8
Selects the target bank.
(default value: BANK 1)
Copying banks
Copy the settings of other bank numbers to an already selected bank number.
MENU Mode-[SYS1]-[BANKSET]-[COPY]
Clearing banks
"Clearing" deletes the settings of the currently selected bank number.
MENU Mode-[SYS1]-[BANKSET]-[CLEAR]
[SYS1], [SYS2] settings and RUN Mode display settings cannot be cleared.
Setting the bank switching method
Select how to switch banks.
MENU Mode-[SYS1]-[BANKSET]-[SWITCH]
Setting
KEY (default value)
Banks are switched by the control keys on Amplifier Unit.
I/O
Banks are switched by the control keys on Amplifier Unit and input lead sig-
nals.
Switching by input lead signals is enabled only in the RUN mode.
ZFV
60
User's Manual
Supplementary Explanation
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
p.60
Description
Description
Introduction
Precautions for Correct Use
Title of each section
Header
Overview
Cross-header
Overview of the
cross-header
Movement through
menus up to setting
items
Explanation of options
User's Manual
ZFV
7
Advertisement
Table of Contents
