Multi-line Random-trigger Mode
Use this mode if you want to measure 2 lines using 1 controller. Measurement can be performed
independently on line 0 and line 1 in response to inputs from different cameras. Scene group data and
scene data can be set separately for line 0 and line 1.
You can switch the monitoring target between line 0 and line 1 using the Line button in the Image display
setting area.
Camera No.
Camera 0
Camera 1
Camera 2
Camera 3
FZ4 User's Manual
Recognition in software
Camera 0 on line 0
Camera 0 on line 1
Camera 1 on line 0
Camera 1 on line 1
Setting Operation Mode
1
37