Omron FZ4 Series User Manual page 272

Set the attribute of the image window
SetImageWindow <windowNo>, <locationX>, <locationY>, <width>, <height>, <unitNo>,
<subNo>, <magnification>, <originX>, <originY>, <update>, <visible>
Parameters
<windowNo>
<locationX>
<locationY>
4
<width>
<height>
<unitNo>
<subNo>
<magnification>
<originX>
<originY>
<update>
<visible>
Return Value
None.
Description
The information of the image display window is saved every scene.
When set "0.5" in an <magnification>, make displaying compactedly.When set "2.0", spread and display.
When appoint -1 in an <magnification>, it becomes the automatic magnification to a window size.
Example
Set the image display window 0.
SetImageWindow 0, 0, 0, <width>, <height>, <unitNo>,
<subNo>, <magnification>, <originX>, <originY>, <update>, <visible>
270 Using Custom Command
Window number (integer type)
Upper left X coordinate value of the window (integer type)
Upper left Y coordinate value of the window (integer type)
Window width (integer type)
Window height (integer type)
Processing unit number (integer type)
Sub number to be displayed (integer type)
Display magnification (Real number type)
Upper left X coordinate of a display image relative to the window upper left coordinate
(integer type)
Upper left X coordinate of a display image relative to the window upper left coordinate
(integer type)
Update timing (integer type)
0: Every measurement
1: Only when an overall judgement result is NG at the time of measurement
2: Only when a target processing unit is NG at the time of measurement
3: Always updated (through display)
Display (integer type)
0: Window invisible
1: Window visible
FZ4 User's Manual