Omron FZ4 Series User Manual page 520

Deletes user account
Deletes the specified user account.
If the specified user account does not exist, the command returns OK without doing any processing at
all.
<Command format>
or
7
(Response format)
When processing is performed normally
When processing is not performed normally
(Parameters explanation)
User ID
User name
(UG0)
Password
(UG0)
(Example)
The following sample command deletes the user with user ID "abc."
<Command>
<Response>
VERGET
Acquires the controller version information.
518 Controlling/Outputting through Serial Communication (Non-procedure)
Specifies the user ID of the user to be deleted with up to 32 characters.
Specifies the user name for a user belonging to the UG0 group (32 characters maximum).
Specifies the password for the above UG0 group user (32 characters maximum).
FZ4 User's Manual