Omron FZ4 Series User Manual page 155

Function
9
name
10 Comment
Enable/
11
Disable
12 Busy On
14 Export
15 Import
2.
Select the command number to be registered.
3.
Enter the command name, function name and comment.
Setting item
Command
Specify Non-procedure command identification name.
name
Function
Set when using created command as function in other command.
name
Comment Maximum 256 characters
Set whether to change to measurement stop state (MeasureStop) before executing
Busy On command. If checked, BUSY is turned ON while command is executing, and then
after execution of command has finished, a MeasureInit event is raised.
4.
Tap the [Edit] button.
FZ4 User's Manual
Display and edit function name for selected comand.
Display and edit comment for selected comand.
Set/display whether custom command is enabled.
If defined but not checked, it is not executed.
Set/display whether to change to measurement stop state
(MeasureStop) before executing command. If checked, BUSY is
turned ON while command is executing, and then after execution of
command has finished, measurement stop state is released
(MeasureStart). Afterwards, a MeasureInit event is raised.
Export the macro program to file.
Import the macro program from file.
The existing data will be overwritten.
Description
Using Custom Command
4
153