Adjust Window And Run Window; Adjust Window; Run Window - Omron FZ4 Series User Manual

ADJUST Window and RUN Window

After test measurement and remeasurement are performed, check the measurement results. If there are
problems, adjust the processing item setting values of the processing units.If the measurement results
are stable, switch to the RUN window and perform measurement. This section describes the ADJUST
window and RUN window.

ADJUST Window

3

RUN Window

There are two types of RUN windows: Normal mode and fast view mode. Change the display speed
according to the intended use.
Note
Switching method for RUN window normal mode and fast view mode
●
Reference:
Method for setting display contents of RUN window
●
Reference:
74 ADJUST Window and RUN Window
Switching the RUN Window to Fast View Mode [Select RUN mode] (p.86)
Setting the RUN Window Display [RUN Mode View Setting] (p.352)
FZ4 User's Manual