Checking Communication Status (Parallel Interface) - Omron FZ4 Series User Manual

3.
Tap [OK].
The settings are confirmed and the Parallel window closes.

Checking Communication Status (Parallel Interface)

Check the communication status with the external devices that are connected with a parallel interface.
You can check whether wiring and communication settings have been performed correctly.
1.
On the Main screen, tap [System] menu - [Communication] - [Standard Parallel I/O].
The Parallel window is displayed.
2.
Tap [Confirmation] to check the I/O status.
7
Display
STEP0,STEP1
DSA0,DSA1
DI
RUN
GATE0,GATE1
BUSY
OR0,OR1
ERR
READY0,READY1
DO
Operation mode = [Multi-line random-trigger mode] (FZ4-11
I/O
STEP
DSA
DI
RUN
GATE
BUSY
OR
ERR
READY
DO
542 Controlling/Outputting through Parallel Communication
The input status of each signal from the external device to the controller is displayed.
When a signal is input, the background color becomes red.
The output status of each signal is displayed.
When a signal is output, the background color becomes red.
The output status from each signal of the controller to external devices can be
specified.
Changes between ON and OFF and between 0 and 1 can be simulated without
performing measurement.
Multi-line random trigger mode
Line 0
STEP0
DSA0
DI0 to DI7
No output
GATE0
BUSY
OR0
ERR (common)
READY0
DO0 to DO7
Description
/H11
Other than Multi-line random
Line 1
trigger mode
STEP1 STEP0
DSA1 DSA0
DI0 to DI7 DI0 to DI7
RUN
GATE1 GATE0
RUN BUSY
OR1 OR0
ERR
READY1 READY0
DO8 to DO15 DO0 to DO15
series only)
FZ4 User's Manual