When processing is not performed normally
<Parameters explanation>
Setting data
Image Logging
Folder name of image logging
save destination
Prefix for image logging file
7
name
Data Logging
Name of destination folder for
saving data logging
Important
Specifying the name of a folder to save to
The method for specifying the name of the folder to save to depends on the model.
●
For FZ4-11
●
For RAMDisk C:\Data\RAMDisk
For USB memory E:\,F:\
For FZ4-L35
●
For RAMDisk \RAMDisk
For USB memory \USBDisk、\USBDisk2
For the FZ4-11
●
would reduce the storage area for scene data etc. and make correct operation impossible.
(Example)
When the image logging setting is acquired when the setting for acquiring the current image logging
save condition is 1 (save only for NG error)
<Command>
<Response>
508
Controlling/Outputting through Serial Communication (Non-procedure)
Identifier 1
imageLogging
Save destination folder name (one-byte alphanumeric
character)
imageLoggingDirectory
If the name of a folder that does not exist is specified, a new
folder will be created.
Prefix for image logging file name (one-byte alphanumeric
imageLoggingHeader
characters)
dataLogging
Save destination folder name (one-byte alphanumeric
dataLoggingDirectory
character)
series
/6
/7
series
series, do not save to a non-volatile area on the C drive (such as C:\ProgramFiles\FZ). This
Set value
0: None
●
1: Only NG
●
2: All
●
0: None
●
1: Only NG
●
2: All
●
FZ4 User's Manual