Omron FZ4 Series User Manual page 604

Line
Image selection status
●
Points are displayed at the starting point, ending point, and midpoint of lines.
Dimension Adjustment
●
8
Drag the points.
●
●
●
Using numbers for setting
●
The window for settings is split into two.Setting is performed through input of numbers or through
tapping on the arrows.
602 Setting Figures
Example) When changing the length of a line
Drag the points toward the intended direction.
Example) When changing the oblique direction
Drag a point in the direction the line is to be changed.
Example) When changing the line width
Drag the center point of the line in a direction perpendicular to the line.
FZ4 User's Manual