(Example)
When getting the number of the sub-image being displayed in display image window "1"
<Command>
<Response>
Setting the number of the currently displayed sub-image
Sets the number of the sub-image displayed in the specified image display window.
7
<Command format>
or
(Response format)
When processing is performed normally
When processing is not performed normally
(Parameters explanation)
Display image
window number
Sub image
number.
(Example)
When setting "2" as the number of the sub-image displayed in display image window "1"
474
Controlling/Outputting through Serial Communication (Non-procedure)
Specify the number (0-15) of the display image window where you are setting the image
mode.
Reference:
Display image window numbers (p.467)
Sets the number (-1 to 32) of the sub-image displayed in the display image window.
FZ4 User's Manual