Omron FZ4 Series User Manual page 497

<Command format>
or
(Response format)
When processing is performed normally
When processing is not performed normally
(Parameters explanation)
Sets the following terminal states (0 to 15):
0th bit: RUN
1st bit: ERR
2nd bit: BUSY
3rd bit: OR0
Terminal
4th bit: OR1
state
5th bit: GATE0
6th bit: GATE1
7th bit: READY0
8th bit: READY1
1: ON, 0: OFF
(Example)
The following sample command activates RUN:
<Command>
<Response>
PARAPORTCOND or PPC
Gets the state of specified parallel I/O terminal
Gets the state of the specified parallel I/O terminal: Active or Inactive.
FZ4 User's Manual Controlling/Outputting through Serial Communication (Non-procedure)
7
495