<Command>
<Response>
REGIMAGE or RID
Registers specified image data as registered image
Registers a specified image data as a registered image. This operation results in the same operation as
when pressing the Register button on the Register Image Management tool. If the source to register is 0,
the last measured image, command argument 3 can be omitted.
<Command format>
7
or
(Response format)
When processing is performed normally
When processing is not performed normally
(Parameters explanation)
Registered image
number
Source to register
498
Controlling/Outputting through Serial Communication (Non-procedure)
Specifies the registered image number: 0 to 999.
0: Last measured image
1: System logging image
2: Image file
FZ4 User's Manual