Omron FZ4 Series User Manual page 638

Setting measurement trigger input to disabled
LockMeasureStop
Parameters
timeout
Return value
If it succeeded, returns 0.
Otherwise, returns value other than 0.
Synchronizing the data for non-stop adjustment settings
NonstopSync
Parameters
8
None
Return value
If non-stop adjustment data is synchronized successfully, returns 0.
Otherwise, returns value other than 0.
Executing batch input of parallel I/O and other terminal states
PutAll
Parameters
ioIdent
data
Return value
If data is input successfully, returns 0.
Otherwise, returns value other than 0.
636 Operation log format
Timeout time
Input destination type
- ParallelIo: Parallel I/O
- Serial normal: Serial non-protocol communication
- UdpNormal: Ethernet UDP non-protocol communication
Input data
FZ4 User's Manual