Omron FZ4 Series User Manual page 501

Logging image If you have specified a system logging image as the source to register, specify a logging image
number/File number: 0 to the number of the logging system images minus one.
name If you have specified an image file, specify a file name with 0 to 256 characters.
(Example)
When an image with registered image number "100" and logging image number "10" is registered
<Command>
<Response>
Loads specified image data as registered image
Loads a specified registered image as a measured image. This operation results in the same operation
as when pressing the Load button on the Register Image Management tool.
<Command format>
or
(Response format)
When processing is performed normally
When processing is not performed normally
(Parameters explanation)
Registered image number
(Example)
The following sample command loads the image with registered image number 100 as a measured
image.
<Command>
FZ4 User's Manual
Specifies the registered image number: 0 to 999.
Controlling/Outputting through Serial Communication (Non-procedure)
7
499