(Parameters explanation)
Copy source scene
No.
Copy destination
scene No.
(Example)
Copying the scene data for Scene 2 to Scene 10
<Command>
<Response>
7
DATALOGCOND or DLC
Getting the data logging condition
Gets the data logging condition for system data.
Gets the "data logging condition" on the logging setting screen.
<Command format>
or
(Response format)
When processing is performed normally
When processing is not performed normally
(Parameters explanation)
Data logging condition
450
Controlling/Outputting through Serial Communication (Non-procedure)
Specifies the scene No. to copy from (0 to the number of scenes in the scene group - 1).
Specifies the scene No. to copy to (0 to the number of scenes in the scene group minus
1).
0: None
1: Only NG
2: All
FZ4 User's Manual