Omron FZ4 Series User Manual page 467

<Command>
<Response>
Sets image mode
Sets the image mode for the specified Image Display window.
<Command format>
or
(Response format)
When processing is performed normally
When processing is not performed normally
(Parameters explanation)
Display image
Specify the number (0-15) of the display image window where you are setting the image mode.
window
Reference:
number
0: Through.
Image mode 1: Frozen camera image, or mixed with frozen camera image and last NG image.
2: Last NG image
(Example)
When setting "Last NG" for the image mode for the display image window 1
<Command>
FZ4 User's Manual
Display image window numbers (p.467)
Controlling/Outputting through Serial Communication (Non-procedure)
7
465