When processing is not performed normally
(Parameters explanation)
Acquisition target
Layout number
(Example)
When the currently displayed window is the RUN window
<Command>
<Response>
Setting the layout number
Sets the layout number and switches the window.
Important
For non-remote operation, only 0: Local can be specified. For remote operation, only 1: Remote can be
●
specified.
If this command is executed with any combination other than the above, it is not supported in Ver. 4.20.
Note that unexpected operations could occur.
<Command format>
or
FZ4 User's Manual
0: Local
1: Remote
0: ADJUST window
1: RUN window
Controlling/Outputting through Serial Communication (Non-procedure)
7
483