Omron FZ4 Series User Manual page 107

2.
This item sets the operation log parameters.
Setting item
Start logging Place a check here to record the operation log from start-up The setting will be
on boot reflected from the next time that the system starts up.
Specify the name of the folder to save the operation log to. The operation log file
name is the date and time at which the operation log was started + the "log"
extension. Example: 2012-09-29_12-39-04.log
When operating in 2-line random trigger mode, set a save destination for each
●
line.
The file name is the date and time at which the operation log was started + the
Destination
line number + the "log" extension.
folder name
Example: 2012-09-29_12-39-04_Line0.log
This setting only takes effect after you execute a data save and restart the
system.
When operating in non-stop adjustment mode, the non-stop adjustment side log
●
is saved with the file name "(date and time at which the operation log was
started)_Nonstop.log".
3.
Tap [OK].
FZ4 User's Manual
Description
Useful Functions for Operation
3
105