Table of Contents
Advertisement
When processing is not performed normally
(Parameters explanation)
Logging operation state
(Example)
The following sample command returns an enabled logging operation state:
<Command>
<Response>
Sets logged operation state
Sets the logged operation state. This command allows configuring the logging operation state in the
same manner as for the Start/End Logging Operation buttons on the Main screen.
<Command format>
or
(Response format)
When processing is performed normally
When processing is not performed normally
FZ4 User's Manual
Controlling/Outputting through Serial Communication (Non-procedure)
0: OFF
1: ON
7
491
Advertisement
Table of Contents
