Omron FZ4 Series User Manual page 450

When processing is not performed normally
<Parameters explanation>
File name of
system +
scene group
data
Important
Do not turn off power to the controller until there is a response.
●
7
(Example)
When the currently used system + scene group 0 data is saved as "LABEL1.BKD" in the "IMG01" folder
in the USB memory to which the drive name "USBDisk2" is assigned
<Command>
<Response>
BRUNCHSTART or BSU
Branches to the flow head (processing unit No. 0). This command can only be executed when the
corresponding flow control processing item is used.
<Command format>
or
(Response format)
When processing is performed normally
When processing is not performed normally
448 Controlling/Outputting through Serial Communication (Non-procedure)
Specifies the save destination and file name during saving with a definite path (ex.:
\USBDisk\abc.bkd, E:\abc.bkd).
Save destinations include directories under the following systems.Be sure to attach a "BKD"
extension to the file name.
Save destination
RAMDisk C:\Data\RAMDisk
USBDisk E:\,F:\,G:\,H:\
FZ4-1100 series FZ-L35 /600/700 series
\RAMDISK
\USBDisk to \USBDisk3
FZ4 User's Manual