Omron FZ4 Series User Manual page 239

Load the Processing unit data
LoadUnitData <sceneNo>, <unitNo>, <unitCount>, <mode>, <fileName>
Parameters
<sceneNo>
<unitNo>
<unitCount>
<mode>
<filename>
Return Value
None.
Description
Load the file appointed with a <filename>
At the position appointed with a <unitNo>, only the number of <unitCount> reads processing unit data.
When appoint -1 in a <sceneNo>, load it in the current scene.
When appoint -1 in an <unitCount>, load all processing unit data.
The file name include a pass.
Example
Behind processing unit number 3, insert five processing units.
LoadUnitData 2, 4, 5, 1, "C:\BACKDIR\unitsave.scn"
Gets the natural logarithm value.
Log (<Expression>)
Parameters
<Expression> The expression that gets the natural log (integer type or double-precision type)
Return Value
Returns the value of the double-precision type number.
The content of the value is the natural logarithm value of the specified expression.
FZ4 User's Manual
Scene number (integer type)
Processing unit number (integer type)
Number of the processing units (integer type)
Load mode (integer type)
0:Overwrite mode
1:Insert mode
File name (character type)
Using Custom Command
4
237