Omron FZ4 Series User Manual page 498

<Command format>
or
(Response format)
When processing is performed normally
7
When processing is not performed normally
(Parameters explanation)
Terminal types
Terminal number
Terminal state
(Example)
The following sample command gets the state of STEP0:
<Command>
<Response>
Sets the state of specified parallel I/O terminal
Sets the state of the specified parallel I/O terminal: Active or Inactive.
496 Controlling/Outputting through Serial Communication (Non-procedure)
0: STEP
1: DSA
2: DI
Specifies the terminal number: 0 to 15.
When the terminal type is STEP, 0: STEP0, 1: STEP1
When the terminal type is DSA, 0: DSA0, 1: DSA1
When the terminal type is DI, 0:DI0 to 7: DI7
0: OFF
1: ON
FZ4 User's Manual