Timing Chart - Omron FZ4 Series User Manual

Timing Chart

Here, I/O timings of various commands are described.
Reference: When "Output Control" Is Set to "None" (p.547)
●
Reference: When "Output Control" Is Set to "Handshaking" (p.551)
●
Reference: When "Output Control" Is Set to "Synchronization Output" (p.552)
●
Reference: Scene/Scene Group Switch (p.553)
●
Reference: Clears measurement value by the parallel command (p.555)
●
Reference: Clears the OR and DO signal by the parallel command (p.556)
●
Reference: Clears error by the parallel command (p.557)
●
Reference: Timing chart at multi-line random trigger mode (p.558)
●
Reference: About Multiple Image Input Function (p.559)
●
When "Output Control" Is Set to "None"
Output the measurement results if controller is not synchronous with external devices. Have the external
devices detect the GATE signal of the controller, and load DO signal during ON status.
Inputting a measurement trigger in the STEP signal
Example 1) When 3 expressions are set in [Parallel Data Output]:
FZ4 User's Manual Controlling/Outputting through Parallel Communication
7
547