Omron FZ4 Series User Manual page 10

Regulations and Standards
●
Using Product Outside Japan
This regulation applies to FZ4 sensor controller and peripheral devices.
If you export (or provide a non-resident with) this product or a part of this product that falls under the
category of goods (or technologies) specified by the Foreign Exchange and Foreign Trade Control Law as
those which require permission or approval for export, you must obtain permission or approval or service
transaction permission) pursuant to the law.
●
Conformance to EC Directives
This regulation applies to FZ4 sensor controller and peripheral devices.
The FH Sensor Controller is compliant with the standards below:
• EMC Directives(2004/108/EC)EN61326-1
Electromagnetic environment : Industrial electromagnetic environment (EN/IEC 61326-1 Table 2)
• Also, the following condition is applied to the immunity test of this product.
: If the level of disturbance of the video is such that characters on the monitor are readable, the test is a
pass.
• This product complies with EC Directives.EMC-related performance of the OMRON devices that
comply with EC Directives will vary depending on the configuration, wiring, and other conditions of
the equipment or control panel on which the OMRON devices are installed.
• The customer must, therefore, perform the final check to confirm that devices and the overall
machine conform to EMC standards.
●
Conformance to KC Standards
Observe the following precaution if you use this product in Korea.
• Class A Device (Broadcasting Communications Device for Office Use)
This device obtained EMC registration for office use (Class A), and it is intended to be used in places
other than homes.
Sellers and/or users need to take note of this.
●
Conformance to CSA Standards
This regulation applies to FZ4 sensor controller and peripheral devices.
This product complies with CSA Standards.
CSA C22.2 No.61010-1
8
FZ4 User's Manual