Communication Example - Omron FZ4 Series User Manual

Communication Example

This section introduces methods for outputting logging image files using Internet browsers.
Important
In the case of FZ4-11
●
Please note that some operations may not be supported by some Internet browser versions.
●
1.
Input the controller IP address in the Internet browser.
(Here, the default controller address 10.5.5.100 is used as an example of IP address.)
The folders in the controller are shown.
Folder name
Network This folder is used for management. Data cannot be saved within this folder.
This folder is for storing logging images and data files. When the RAMDisk is set as
RAMDisk
the save destination, files are stored in this folder.
Displayed when a USBDisk is plugged into the controller. When the USBDisk is set
USBDisk
as the save destination, files are stored in this folder.
Control
This file is used for management. Do not delete this file.
Panel.lnk
2.
To view the inside of the RAMDisk, enter RAMDisk at the end of the IP address.
When the RAMDisk is set as the image logging destination, the logging files are displayed.
3.
In the same way as with normal file operations, logging images can be output from the controller.
FZ4 User's Manual
/H11 , only 2 USB memory devices can be accessed.
Description
Externally Outputting Data through FTP
7
563