Note
The following windows cannot be captured.
●
The window to select a file or a folder
●
Confirmation message window when LCD is turned off
●
Setting the Save Destination for Captured Images
Sets the save destination for the image captured with the screen capture function.
3
1.
On the Main screen, tap the [System] menu - [Screen capture] - [Screen capture setting].
The Screen Capture Setting window is displayed.
2.
Specify the save destination for captured images.
3.
Tap [OK].
The settings are determined and the Screen Capture Setting window closes.
Using the Operation Log Functions
Setting the operation log
This function automatically saves the contents of controller operations and setting changes as a unique
file delimited with; (semicolons). Setting content changes are recorded as a time series, which makes
change management possible.
Operation log output example:
The time and date, user name, and operation contents are recorded.
2012/09/10 13:08:41;Administrator;SetSystemData,"OperationLog","enabled","1";0
2012/09/10 13:08:41;Administrator;MeasureStart;0
2012/09/10 13:08:41;Administrator;GetSceneGroupNo;0
・・・
Important
The contents of operation log files cannot be checked on the controller. Open with a text editor or change the
●
delimiter characters to; (semicolons) with spreadsheet software.
1.
On the Main screen, tap the [Measure] menu -> [Operation log] -> [Operation log setting].
The operating log setting window is displayed.
104
Useful Functions for Operation
FZ4 User's Manual