Omron FZ4 Series User Manual page 99

Setting
value
Setting item
[Factory
default]
[None]
Image
Only NG
Logging
All
3.
Set the logging images save destination.
Reference
In order to perform fast logging, image files are first saved in the controller memory. Note, however, that
●
the controller memory for saving images is a ring memory. If the maximum number of save images is
reached, images will be overwritten starting with the oldest saved image if further images are saved.
Reference: About Number of Logging Images (p.611)
The controller memory is cleared if the power is turned off again.
To keep images, select "Save to memory + file" and save images to USB memory, etc.
Setting item
[Save to memory]
Destination
Save to memory + file
When "Save to memory + file" in "Destination" is selected, set the destination and file names.
Setting value
Setting item
[Factory default]
[RAMDisk]
●
Folder name
USBDisk
●
Prefix -
Switch
Checked
●
saving folder
[Unchecked]
●
by scene
FZ4 User's Manual
No images are saved.
When logging images with the processing item "Image Logging",
select [None].
Only images with an overall judgement of NG are saved.
All measured images are saved.
Note, however, that some images may not be saved if "Measurement"
is set in "Logging priority" in step 4.
Setting value
[Factory default]
Saves to the controller memory.
Images saved to the controller memory are saved to a
USBDisk or RAMDisk as files.
Specify the image file save destination (RAMDisk or USB
memory). Logging images are saved in the specified save
destination folder.(Maximum number of characters: 128
single-byte characters)
Sets the prefix for the save file name. (Maximum number of
characters: 32 single-byte characters)
The set character string is added at the beginning of the name
of the save file.
If checked, folders that correspond to scene numbers are
automatically created and image files are divided by scene and
saved.
Description
Description
Description
Useful Functions for Operation
3
97