Input signal
Signal
DI0
DI1 to 5
DI6
DI7
Timing chart at multi-line random trigger mode
When the flow setting example includes a process after the parallel judgement is output for both lines 0
and 1
7
558
Controlling/Outputting through Parallel Communication
Turns the command ON.
Turns the command OFF.
Turns the command ON.
This is the trigger signal to clear an error.
After DI0 to 6 is set, turn DI7 ON after an interval over 1 ms. After checking that the ERROR signal
has turned OFF, turn DI7 OFF, and then turn DI0 to 6 OFF.
Function
FZ4 User's Manual