Omron FZ4 Series User Manual page 558

Clears the OR and DO signal by the parallel command
7
Output signal
Signal
RUN
READY
BUSY
OR
DO0 to 15
GATE
Input signal
Signal
DI0
DI1
DI2 to 5
DI6
556 Controlling/Outputting through Parallel Communication
Turns ON when the controller is set to the RUN window. Turns OFF in the ADJUST window.
This does not change when the OR and DO signal is being cleared.
Do not, however, clear the OR and DO signal when the READY signal is turned OFF. The command
will not be executed correctly.
This does not change when the OR and DO signal is being cleared.
Do not, however, clear the OR and DO signal when the BUSY signal is turned ON. The command
will not be executed correctly.
It will turn OFF if it was turned ON.
It will turn OFF if it was turned ON.
This does not change when the OR and DO signal is being cleared.
Do not, however, clear the OR and DO signal when the GATE signal is turned ON. The command
will not be executed correctly. Or, the DO and GATE will not be output correctly.
Turns the command OFF.
Turns the command ON.
Turns the command OFF.
Turns the command ON.
Function
Function
FZ4 User's Manual