Dodge RAM TRUCK 1500 1995 Service Manual page 1323

21 - 41 NV3500 MANUAL TRANSMISSION mm
SHAFT
LEVER
ROLL
PIN
(7/8" LONG)
LEVER
AND
BUSHING
^ 0 J9421-113
Fig. 119 Starting Roll Pin in Shift Shaft Lever
(15) Before proceeding, verify that lock pin slot in
lever bushing is positioned as shown (Fig. 120).
J9421-114
Fig. 120 Correct Seating Of Shift Shaft Lever Roll Pin
(16) Align roll pin holes in shift socket and shift
shaft. Then start roll pin into shift shaft by hand (Fig.
122).
ROLL
PIN
p J9521-154
ft Socket
(17) Seat roll pin in shift socket with pin punch.
Roll pin must be flush with socket after installation
(Fig. 122).
J9521-155
Fig. 122 Seating Shift Socket Roll Pin
(18) Verify that notches in shift fork arms are
aligned (Fig. 123). Realign arms if necessary.
(19) Rotate shaft lever and bushing downward (out
of fork arms), to expose detent bore in lever (Fig.
123).
SHIFT
FORK
ARMS
DETENT
BORE
IN SHAFT
LEVER
J9421-115
Fig. 123 Shaft Lever Positioned For Detent Ball and
Spring installation