Dodge RAM TRUCK 1500 1995 Service Manual page 1689

24 - 20 HEATING AND AIR CONDITIONING
HEATER &
A/C CONTROL
PANEL
VACUUM
LINES
J9424-6
Fig. 2 Heater-A/C Control Panel
T E M P E R A T U R E /
BLEND A I R
DOOR C A B L E
J9424-7
Fig. 3 Vacuum Connector
INSTALLATION
(1) Connect the vacuum connector.
(2)' Install heat and A/C controller (refer to Group
8E, Instrument Panel and Gauges).
(3) Connect the negative cable to the battery.
BLOWER MOTOR AND WHEEL
The blower motor and wheel are located under the
glove box and can be removed from the passenger
compartment.
REMOVAL
(1) Disconnect the negative cable from the battery.
(2) Disconnect the blower motor cooling tube (Fig.
4).
(3) Remove the blower motor electrical connector
from the retainer. Disconnect the electrical connector
(Fig. 4).
(4) Remove the blower motor and wheel assembly
mounting screws (Fig. 4).
(5) Remove the blower motor.
BLOWER
MOTOR
HOUSING
COOLING
TUBE
J9324-10
ELECTRICAL
CONNECTOR
Fig. 4 Blower Motor
(6) Remove the blower motor wheel retainer clip
(Fig. 5) and remove wheel off of the blower motor
shaft.
BLOWER MOTOR
WHEEL
RETAINER
CLIP
J9324-92
Fig. 5 Blower Motor Wheel