I - 38
3 J L ENGINE
BR
(5) Position the oil pan over the dowels and onto
the gasket.
(6) Install the oil pan bolts. Tighten the bolts to 24
N-m (215 in. lbs.) torque.
(7) Remove the dowels. Install the remaining oil
pan bolts. Tighten these bolts to 24 N-m (215 In. lbs.)
torque.
(8) Lower the engine into the support cushion
brackets and tighten the thru-bolt nut to the proper
torque.
(9) Install the drain plug. Tighten drain plug to 34
N-m (27 ft. lbs.) torque.
(10) Install the engine to transmission strut.
(11) Install exhaust pipe.
(12) Lower vehicle.
(13) Install dipstick.
(14) Connect the negative cable to the battery.
(15) Fill crankcase with oil to proper level.