mm -
46RH/47RH TRANSMISSION OVERHAUL
21 - 235
(22) Remove transfer plate from upper housing
(Fig. 117).
Fig. 117 Removing Transfer Plate From Upper
Homing
(23) Turn transfer plate over so upper housing sep
arator plate is facing upward (Fig. 118).
(24) Remove brace plate from lower housing sepa
rator plate and transfer plate (Fig. 118).
J9321-150
PLATE
PLATE
Fig. 118 Brace Plate Removal
(25) Remove upper housing separator plate from
transfer plate (Fig. 119). Note position of filter in
separator plate for assembly reference.
(26) Remove rear clutch and rear servo check balls
from transfer plate. Note check ball locations for as
sembly reference before removing it (Fig. 120). Check
ball will be plastic or steel depending on valve body
production date.
VALVE BODY UPPER
HOUSING
DISASSEMBLY
(1) Note location of check balls in valve body upper
housing (Fig. 121). Then remove one large and six
smaller diameter check balls with magnet (total of 7
check balls are used).
TRANSFER
UPPER
BRACE
J932M51
Fig. 119 Upper Housing Separator Plate Removal
Fig. 120 Rear Clutch/Rear Servo Check Ball
Locations
(2) Remove E-clip that secure shuttle valve second
ary spring on valve stem (Fig. 122).
(3) Remove governor plug and shuttle valve covers
(Fig. 123).
(4) Remove throttle plug, primary spring, shuttle
valve, secondary spring, and spring guides (Fig. 123).
(5) Remove boost valve retainer, spring and valve
if not previously removed.