Dodge RAM TRUCK 1500 1995 Service Manual page 1579

21 - 298 NP231 HD/NP241/NP241 HD TRANSFER CASE
(2) Install new needle bearing in planetary carrier
(Fig. 70). Use Handle C-4171 and Installer 5062 to
install bearing.
I " 4 : ! SPECIAL
Fig. 70 Planetary Carrier Needle Bearing installation
(3) Install first thrust washer in carrier (Fig. 71).
Lube washer with petroleum jelly before installation.
(4) Support carrier with wood blocks under PTO
THRUST
Fig. 71 Thrust Washer Installation
gear (Fig. 72).
(5) Install support sleeve in planetary carrier (Fig.
72). Be sure sleeve is seated.
(6) Install new needle bearing in input gear if nec­
essary (Fig. 73). Use Handle C-4171 and Installer
5065 to install bearing flush with upper edge of bear­
ing bore. Note that bearing has built-in cup plug. Do
not damage plug during installation.
(7) Install input gear in planetary carrier (Fig. 74).
(8) Install second thrust washer in planetary car­
rier. Be sure washer tabs are seated in carrier slots
(Fig.
74).
PLANETARY
SUPPORT
SLEEVE
B L O C K S
J9421-331
Fig. 72 Support Sleeve Installation
Fig. 73 Installing Needle Bearing In Input Gear
INPUT
Fig. 74 Input Gear And Thrust Washer Installation