23 - 8
BODY COMPONENTS
BR
MIRROR FLAG COVER
REMOVAL
(1) Remove door trim panel.
(2) Remove flag door seal.
(3) Remove nuts holding door flag cover to door
frame (Fig. 10).
J9423-60
Fig. 10 Mirror Flag Cower
(4) Separate flag cover from vehicle.
INSTALLATION
Eeverse the preceding operation. .
LOW MOUNTED SIDE VIEW MIRROR
REMOVAL
(1) Remove bolts holding lower support legs to
outer door panel.
(2) Remove bolts holding upper support arms to
outer door panel (Fig. 11).
(3) Separate mirror from vehicle.
INSTALLATION
Place insulation washers between support frame
and painted door panel and reverse the preceding op
eration.
DOOR LATCH STRIKER
REMOVAL
(1) Release door latch and open door.
(2) Mark outline of striker base on door jamb to
aid installation.
(3) Remove screws holding striker to door jamb
(Fig. 1).
MIRROR
ASSEMBLY
J9423-57
Fig. 11 Low Mounted Side View Mirror
(4) Separate striker from vehicle.
INSTALLATION
Reverse the preceding operation.
J9423-49
Fig
B
1 Door Latch Striker
DOOR SEAL
REMOVAL
(1) Remove A-pillar molding.
(2) Remove cowl panel and sill cover.
(3) Remove quarter panel.