Dodge RAM TRUCK 1500 1995 Service Manual page 1257

11 -14 STEERING
BR
PUMP SHAFT VACUUM
PUMP DRIVE
J9119-77
Fig. 7 Pump Assembly Removal/Installation
(9) Remove the steering pump to vacuum pump
bracket attaching nuts (Fig. 8).
OIL FEED
FITTING
VACUUM
PUMP
PUMP
SPACERS
STEERING
PUMP
J9119-78
Fig. 8 Bracket Nut Removal/installation
(10) Slide the steering pump from the bracket. Use
care not to damage the internal oil seal in the vac­
uum pump (Fig. 9).
(11) Remove the two pump body spacers (Fig. 9),
for pump installation.
INSTALLATION
(1) Install the two pump body spacers (Fig. 9).
PUMP
SPACERS
MOUNTING
BRACKET
J9119-69
Fig. 9 Steering Pump Removai/instaiiation ,
(2) Rotate the drive gear until the steering pump
and vacuum pump drive dogs align. Install the steer­
ing pump onto the vacuum pump bracket. Use care
to avoid damaging the oil seal in the vacuum pump
during installation. The steering pump housing
and spacers must mate completely with the
vacuum pump bracket (Fig. 10).
VACUUM PUMP
BRACKET
OIL FEED
FITTING
J9119-71
Fig. 10 Steering/Vacuum Pump Assembly
(3) Install the three (3) vacuum pump bracket to
steering pump nuts. Tighten to 24 N-m (18 ft. lbs.)
torque.