Dodge RAM TRUCK 1500 1995 Service Manual page 1462

42RH TRANSMISSION OVERHAUL 21 -179
(13) Install assembled driving shell and sun gear
on intermediate shaft (Fig. 78).
Fig. 78 installing Assembled Sun Gear And Driving
Shell On Intermediate Shaft
(14) Install rear thrust washer on front planetary
gear (Fig. 79). Use enough petroleum jelly to hold
washer on gear and be sure washer tabs are all prop­
erly seated.
Fig. 79 Installing Rear Thrust Washer On Front
Planetary Gear
(15) Assemble front annulus gear and support if
necessary.
(16) Position thrust plate on front annulus gear
support (Fig. 80). Use liberal quantity of petroleum
jelly to hold plate in place.
(17) Install front planetary gear on intermediate
shaft and in driving shell (Fig. 81).
(18) Install front thrust washer on front planetary
gear (Fig. 81). Use enough petroleum jelly to hold
washer in place on gear and be sure washer tabs are
seated.
(19) Assemble front annulus gear and support. Be
sure support snap ring is seated.
Fig. 80 Installing Thrust Plate On Front Annulus
Support
Fig. 81 Installing Front Planetary And Annulus Gears
(20) Install front annulus thrust washer (Fig. 82).
Align flat on washer with flat on planetary hub. Also
be sure washer tab is facing forward.
Fig. 82 Front Annulus Thrust Washer Installation