Dodge RAM TRUCK 15002017 Owner's Manual

Table of Contents

Quick Links

R A M T R U C K

2 0 1 7

1 5 0 0 / 2 5 0 0 / 3 5 0 0

O W N E R ' S M A N U A L

Table of Contents

Chapters

Table of Contents

Summary of Contents for Dodge RAM TRUCK 15002017

Page 1 R A M T R U C K 2 0 1 7 1 5 0 0 / 2 5 0 0 / 3 5 0 0 O W N E R ’ S M A N U A L...
Page 2 This manual illustrates and describes the operation of VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name FCA features and equipment that are either standard or op- US LLC shall be deemed to be deleted and the name FCA tional on this vehicle.
Page 3: Introduction 3
TABLE OF CONTENTS SECTION PAGE INTRODUCTION ..............3 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE .
Page 5: Table Of Contents
INTRODUCTION CONTENTS INTRODUCTION ......4 VEHICLE IDENTIFICATION NUMBER ..7 HOW TO USE THIS MANUAL .
Page 6: Introduction
4 INTRODUCTION INTRODUCTION HOW TO USE THIS MANUAL Congratulations on selecting your new FCA US LLC ve- Consult the Table of Contents to determine which section hicle. Be assured that it represents precision workmanship, contains the information you desire. distinctive styling, and high quality. Since the specification of your vehicle depends on the items This Owner’s Manual has been prepared with the assis- of equipment ordered, certain descriptions and illustra-...
Page 7 INTRODUCTION 5 Consult the following table for a description of the symbols that may be used on your vehicle or throughout this Owner’s Manual:...
Page 8: Warnings And Cautions
6 INTRODUCTION WARNINGS AND CAUTIONS Operating instructions for the special equipment installed by the conversion/camper manufacturer should also be This Owner’s Manual contains WARNINGS against oper- supplied with your vehicle. If these instructions are miss- ating procedures that could result in a collision, bodily ing, please contact your authorized dealer for assistance in injury and/or death.
Page 9: Vehicle Identification Number
INTRODUCTION 7 VEHICLE IDENTIFICATION NUMBER VEHICLE MODIFICATIONS/ALTERATIONS The Vehicle Identification Number (VIN) is found on the WARNING! left front corner of the instrument panel, visible through the windshield. This number also appears on the vehicle Any modifications or alterations to this vehicle could frame and underbody as well as the Automobile Informa- seriously affect its roadworthiness and safety and may tion Disclosure Label affixed to a window on your vehicle,...
Page 11 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS ▫ To Arm The System ..... .20 A WORD ABOUT YOUR KEYS ....11 ▫...
Page 12 10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ Power Windows — If Equipped ... . .38 REMOTE STARTING SYSTEM — IF EQUIPPED . . .28 ▫ How To Use Remote Start....29 ▫...
Page 13: A Word About Your Keys
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 A WORD ABOUT YOUR KEYS Your vehicle uses either a key start ignition system or keyless ignition system. The key start ignition system consists of a either a Wireless Ignition Node (WIN) system, or a Keyless Push Button Ignition system.
Page 14: Keyless Push Button Ignition And Key Fob - If Equipped
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Wireless Ignition Node (WIN) Key Fob Keyless Push Button Ignition And Key Fob — If Equipped The key fob operates the ignition switch. Insert the square end of the key fob into the ignition switch located on the This feature allows the driver to operate the ignition switch instrument panel and rotate to the desired position.
Page 15 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 during start RUN will illuminate. It also contains the Remote Keyless Entry key fob and an emergency key, which stores in the rear of the key fob. Keyless Push Button Ignition 1 — OFF 2 —...
Page 16: Key Fobs - If Equipped
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Key Fobs — If Equipped The key fob operates the ignition switch. Insert the square end of the key fob into the ignition switch located on the instrument panel and rotate to the desired position. It also contains the key fob and an emergency key, which stores in the rear of the key fob.
Page 17: Removing Key Fob From The (Win) Ignition
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 To remove the emergency key, slide the mechanical latch Removing Key Fob From The (WIN) Ignition on the backside of the key fob sideways with your thumb and then pull the key out with your other hand. NOTE: When using the emergency key to gain access to your vehicle, be aware that the security alarm may be triggered.
Page 18 16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Place the gear selector in PARK (if equipped with an WARNING! (Continued) automatic transmission). Turn the key fob to the OFF and lock all doors. If equipped with Keyless Enter- position and then remove the key fob. N-Go, always make sure the keyless ignition node is NOTE: in the OFF mode, remove the key fob from the...
Page 19: Key-In-Ignition Reminder
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 Key-In-Ignition Reminder WARNING! (Continued) Opening the driver’s door when the key fob is in the • Do not leave children or animals inside parked ignition and the ignition switch position is OFF or ACC, a vehicles in hot weather.
Page 20: Sentry Key
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Changes or modifications not expressly approved problem with the electronics. In addition, if the light begins by the party responsible for compliance could void the to flash after the bulb check, it indicates that someone used user’s authority to operate the equipment.
Page 21: Replacement Key Fobs
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 Replacement Key Fobs General Information The following regulatory statement applies to all radio NOTE: Only key fobs that are programmed to the vehicle frequency (RF) devices equipped in this vehicle: electronics can be used to start and operate the vehicle. Once a key fob is programmed to a vehicle, it cannot be This device complies with Part 15 of the FCC Rules and programmed to any other vehicle.
Page 22: Rearming Of The System
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE For an additional 15 minutes only, the headlights will turn 2. Perform one of the following methods to lock the on, the park lamps and/or turn signals, and vehicle vehicle: security light will flash. •...
Page 23: Security System Manual Override
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 2. Grasp the Passive Entry Unlock Door Handle with a remain armed when the battery is reconnected; the exterior valid key fob within 5 ft (1.5 m) of the passive entry door lights will flash, and the horn will sound.
Page 24: Remote Keyless Entry
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The illuminated entry system will not operate if the NOTE: Inserting the key fob with integrated key into the dimmer control is in the “Dome OFF” position (rotate ignition switch disables the system from responding to any horizontal thumb wheel on the bottom of the switch to the button pushes from that key fob.
Page 25: Remote Unlock The Doors
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 Remote Key Unlock, Driver Door/All Doors First This feature lets you program the system to unlock either the driver’s door or all doors on the first push of the unlock button on the key fob. To change the current setting, proceed as follows: •...
Page 26: To Lock The Doors
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For vehicles not equipped with a touchscreen radio, • For vehicles equipped with a touchscreen radio, refer to refer “Instrument Cluster Display/Settings “Uconnect Settings” in “Understanding Your Instrument (Customer-Programmable Features)” in “Understanding Panel”...
Page 27: Air Suspension (Remote Lowering Of The Vehicle) - If Equipped
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 • The vehicle battery must be fully charged. NOTE: • The interior lights will turn off if you turn the ignition • All doors must be closed. switch to the ACC or ON/RUN position while the Panic •...
Page 28 26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: • Perchlorate Material — special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate • Do not touch the battery terminals that are on the back housing or the printed circuit board. 1. Remove the emergency key by sliding the mechanical latch on the back of the key fob sideways with your thumb and then pull the key out with your other hand.
Page 29 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 Remove Screw From Key Fob Case Separating WIN Key Fob Case...
Page 30: General Information
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE General Information The following regulatory statement applies to all Radio Frequency (RF) devices equipped in this vehicle: This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: 1.
Page 31: How To Use Remote Start
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 • Vehicle security alarm not active NOTE: • The vehicle must be equipped with an automatic trans- WARNING! mission to be equipped with Remote Start. • Do not start or run an engine in a closed garage or •...
Page 32: To Enter Remote Start Mode
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The instrument cluster display message stays active until To Exit Remote Start Mode Without Driving The the ignition is turned to the ON/RUN position. Vehicle Push and release the Remote Start button one time or allow To Enter Remote Start Mode the engine to run for the entire 15-minute cycle.
Page 33: General Information
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 The Remote Start Comfort System can be activated and DOOR LOCKS deactivated through the Uconnect System. Refer to ”Cus- Manual Door Locks tomer Programmable Features” in “Uconnect Settings” in Front and rear doors may be locked by moving the lock “Understanding Your Instrument Panel”...
Page 34: Power Door Locks - If Equipped
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The emergency key will unlock the driver door lock on WARNING! (Continued) your vehicle. • Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others WARNING! could be seriously or fatally injured.
Page 35 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 door lock feature can be enabled or disabled by your authorized dealer. The auto door lock feature is enabled/ disabled in the Uconnect Settings. Automatic Doors Unlock — If Equipped This feature unlocks all of the doors of the vehicle when either front door is opened.
Page 36: Child-Protection Door Lock
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Child-Protection Door Lock To provide a safer environment for children riding in the rear seat, the rear doors (if equipped) of your vehicle have the Child-Protection Door Lock system. Child Lock Control WARNING! Avoid trapping anyone in the vehicle in a collision.
Page 37: Keyless Enter-N-Go - Passive Entry
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 NOTE: NOTE: • After setting the Child-Protection Door Lock system, • Passive Entry may be programmed ON/OFF. Refer to always test the door from the inside to make certain it is “Uconnect Settings” in “Understanding Your Instrument in the desired position.
Page 38 36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Unlock From The Driver’s Side: To Unlock From The Passenger Side: With a valid Passive Entry key fob within 5 ft (1.5 m) of the With a valid Passive Entry key fob within 5 ft (1.5 m) of the driver door handle, grab the front driver door handle to passenger door handle, grab the front passenger door unlock the driver’s door automatically.
Page 39 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 automatically unlocks all vehicle doors and chirps the horn three times (on the third attempt ALL doors will lock and the Passive Entry key fob can be locked in the vehicle). To Lock The Vehicle’s Doors: With one of the vehicle’s Passive Entry key fobs within 5 ft (1.5 m) of the driver or passenger front door handles, push the door handle lock button to lock all doors.
Page 40: General Information
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The vehicle doors can also be locked by using the key fob WINDOWS lock button or the lock button located on the vehicle’s Power Windows — If Equipped interior door panel. General Information The following regulatory statement applies to all radio frequency (RF) devices equipped in this vehicle: This device complies with Part 15 of the FCC Rules and...
Page 41 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 ignition switch is turned to the ON/RUN or ACC position, first detent, release, and the window will go down auto- and for up to 10 minutes after the ignition is turned OFF or matically.
Page 42 40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: If the window runs into any obstacle during the 3. Push the window switch down firmly to the second Auto-Closure, it will reverse direction and then go back detent to open the window completely and continue to down.
Page 43: Wind Buffeting
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 OCCUPANT RESTRAINT SYSTEMS Some of the most important safety features in your vehicle are the restraint systems: Occupant Restraint Systems Features • Seat Belt Systems • Supplemental Restraint Systems (SRS) Air Bags •...
Page 44: Seat Belt Systems
42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE seat as far back as possible and use the proper child bags will inflate forcefully into the space between occu- restraint (refer to “Child Restraints” in this section for pants and the door and occupants could be injured. further information).
Page 45 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 vehicle. Seat belts reduce the possibility of ejection and the BeltAlert Warning Sequence risk of injury caused by striking the inside of the vehicle. The BeltAlert warning sequence is activated when the Everyone in a motor vehicle should be belted at all times.
Page 46 44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The outboard front passenger seat BeltAlert is not active conditions. However, in a collision the seat belt will lock when the outboard front passenger seat is unoccupied. and reduce your risk of striking the inside of the vehicle or BeltAlert may be triggered when an animal or other items being thrown out of the vehicle.
Page 47 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 WARNING! (Continued) WARNING! (Continued) • Be sure everyone in your vehicle is in a seat and abdomen. Always wear the lap part of your seat belt using a seat belt properly. Occupants, including the as low as possible and keep it snug.
Page 48 46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) bones. Wear the seat belt over your shoulder so that your strongest bones will take the force in a collision. • A shoulder belt placed behind you will not protect you from injury during a collision.
Page 49 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 Inserting Latch Plate Into Buckle Positioning The Lap Belt 4. Position the lap belt so that it is snug and lies low across 5. Position the shoulder belt across the shoulder and chest your hips, below your abdomen.
Page 50 48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lap/Shoulder Belt Untwisting Procedure Use the following procedure to untwist a twisted lap/ shoulder belt. 1. Position the latch plate as close as possible to the anchor point. 2. At about 6 to 12 in (15 to 30 cm) above the latch plate, grasp and twist the seat belt webbing 180 degrees to create a fold that begins immediately above the latch plate.
Page 51 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 NOTE: The adjustable upper shoulder belt anchorage is the seat belt to detach from the lower anchor when the seat equipped with an Easy Up feature. This feature allows the is folded. The latch plate and regular latch plate can then be shoulder belt anchorage to be adjusted in the upward stored out of the way in the seat for added convenience to position without pushing or squeezing the release button.
Page 52 50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 6. When the seat belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” 7. Position the lap belt so that it is snug and lies low across your hips, below your abdomen.
Page 53 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 WARNING! (Continued) procedure to detach the mini-latch plate and mini- buckle, untwist the webbing, and reattach the mini- latch plate and mini-buckle. First Row Center Lap Belt Operating Instructions — If Equipped The center seating position for the Quad Cab, Mega Cab and Crew Cab front seat has a lap belt only.
Page 54 52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Seat Belt Extender is not required for a different occupant, Seat Belts And Pregnant Women it must be removed. WARNING! • ONLY use the Seat Belt Extender if it is physically required in order to properly fit the original seat belt system.
Page 55 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 Seat Belt Pretensioner Switchable Automatic Locking Retractors (ALR) — If Equipped The front seat belt system is equipped with pretensioning devices that are designed to remove slack from the seat belt The seat belts in the passenger seating positions may be in the event of a collision.
Page 56 54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE In Automatic Locking Mode, the shoulder belt is automati- cally pre-locked. The seat belt will still retract to remove any slack in the shoulder belt. Use the Automatic Locking Mode anytime a child restraint is installed in a seating position that has a seat belt with this feature.
Page 57: Supplemental Restraint Systems (Srs)
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 3. Allow the seat belt to retract. As the seat belt retracts, Supplemental Restraint Systems (SRS) you will hear a clicking sound. This indicates the seat Some of the safety features described in this section may be belt is now in the Automatic Locking Mode.
Page 58 56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Seat Belt Pretensioners The ORC also includes diagnostics that will illuminate the instrument panel Air Bag Warning Light if a malfunction is • Seat Belt Buckle Switch detected that could affect the air bag system. The diagnos- Air Bag Warning Light tics also record the nature of the malfunction.
Page 59 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 WARNING! Ignoring the Air Bag Warning Light in your instrument panel could mean you won’t have the air bag system to protect you in a collision. If the light does not come on as a bulb check when the ignition is first turned on, stays on after you start the vehicle, or if it comes on as you drive, have an authorized dealer service the air bag...
Page 60 58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE buckle switch may adjust the inflation rate of the Ad- WARNING! (Continued) vanced Front Air Bags. • Never place a rear-facing child restraint in front of an air bag. A deploying passenger front air bag can WARNING! cause death or serious injury to a child 12 years or •...
Page 61 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 Front Air Bag Operation The steering wheel hub trim cover and the upper right side of the instrument panel separate and fold out of the way as Front Air Bags are designed to provide additional protec- the air bags inflate to their full size.
Page 62 60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Supplemental Side Air Bags When the SAB deploys, it opens the seam on the outboard side of the seatback’s trim cover. The inflating SAB deploys Your vehicle is equipped with two types of side air bags: through the seat seam into the space between the occupant 1.
Page 63 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 area where the SABICs inflate. Children are at an even greater risk of injury from a deploying air bag. WARNING! • Do not stack luggage or other cargo up high enough to block the deployment of the SABICs. The trim covering above the side windows where the SABIC and its deployment path are located should remain free from any obstructions.
Page 64 62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Side Air Bags are a supplement to the seat belt restraint WARNING! system. Side Air Bags deploy in less time than it takes to • Side Air Bags need room to inflate. Do not lean blink your eyes.
Page 65 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 Bags deploy independently; a left side impact deploys the sensing-system may also deploy the seat belt pretension- left Side Air Bags only and a right side impact deploys the ers, with or without the Side Air Bags, on both sides of the right Side Air Bags only.
Page 66 64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If A Deployment Occurs irritation, move to fresh air. If the irritation continues, see your doctor. If these particles settle on your clothing, The front air bags are designed to deflate immediately after follow the garment manufacturer’s instructions for deployment.
Page 67 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 Enhanced Accident Response System Maintaining Your Air Bag System In the event of an impact, if the communication network WARNING! remains intact, and the power remains intact, depending on the nature of the event, the ORC will determine whether •...
Page 68: Child Restraints
66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • These data can help provide a better understanding of WARNING! (Continued) the circumstances in which crashes and injuries occur. dealer. Only manufacturer approved seat accessories NOTE: EDR data are recorded by your vehicle only if a may be used.
Page 69 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 Children 12 years or younger should ride properly buckled Before buying any restraint system, make sure that it has a up in a rear seat, if available. According to crash statistics, label certifying that it meets all applicable Safety Stan- children are safer when properly restrained in the rear dards.
Page 70 68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Summary Of Recommendations For Restraining Children In Vehicles Recommended Type Of Child Re- Child Size, Height, Weight Or Age straint Infants and Toddlers Children who are two years old or Either an Infant Carrier or a Convert- younger and who have not reached ible Child Restraint, facing rearward the height or weight limits of their...
Page 71 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 The infant carrier is only used rear-facing in the vehicle. It WARNING! is recommended for children from birth until they reach the weight or height limit of the infant carrier. Convertible Do not install a rear-facing car seat using a rear support child seats can be used either rear-facing or forward-facing leg in this vehicle.
Page 72 70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Older Children And Child Restraints WARNING! Children who are two years old or who have outgrown • Improper installation can lead to failure of an infant their rear-facing convertible child seat can ride forward- or child restraint.
Page 73 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 Children Too Large For Booster Seats If the answer to any of these questions was “no,” then the child still needs to use a booster seat in this vehicle. If the Children who are large enough to wear the shoulder belt child is using the lap/shoulder belt, check seat belt fit comfortably, and whose legs are long enough to bend over periodically and make sure the seat belt buckle is latched.
Page 74 72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Recommendations For Attaching Child Restraints Restraint Type Combined Use Any Attachment Method Shown With An “X” Below Weight of the LATCH – Lower Seat Belt Only LATCH – Lower Seat Belt + Top Child + Child Anchors Only Anchors + Top...
Page 75 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 Lower Anchors And Tethers For CHildren (LATCH) used with the top tether anchorage to install the child Restraint System restraint. Please see the following table for more information. LATCH Positions For Installing Child Restraints In This Vehicle LATCH Label Your vehicle is equipped with the child restraint anchorage...
Page 76 74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Crew/Mega Cabs 60/40 Split Bench LATCH Positions Quad Cab 60/40 Split Bench LATCH Positions • • Lower Anchorage Symbol (2 Anchorages Per Lower Anchorage Symbol (2 Anchorages Per Seating Position) Seating Position) •...
Page 77 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 Quad/Crew Cabs Full Bench LATCH Positions • Lower Anchorage Symbol (2 Anchorages Per Seating Position) • Top Tether Anchorage Symbol Frequently Asked Questions About Installing Child Restraints With LATCH What is the weight limit (child’s 65 lbs (29.5 kg) Use the LATCH anchorage system weight + weight of the child re-...
Page 78 76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Frequently Asked Questions About Installing Child Restraints With LATCH Can the LATCH anchorages and the Do not use the seat belt when you seat belt be used together to attach a use the LATCH anchorage system to rear-facing or forward-facing child attach a rear-facing or forward-facing restraint?
Page 79 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 Locating The LATCH Anchorages Locating The Upper Tether Anchorages The lower anchorages are round bars that are Regular Cab models have tether strap anchor- found at the rear of the seat cushion where it ages behind the front center and right seats.
Page 80 78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Center Seat LATCH Quad Cab Or Crew Cab Full Bench Rear Seat: No Lower Center LATCH Anchorages Available WARNING! • Do not install a child restraint in the center position using the LATCH system. This position is not ap- proved for installing child seats using the LATCH attachments.
Page 81 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79 forward and rearward in the vehicle, you may wish to WARNING! move it to its rear-most position to make room for the child seat. You may also move the front seat forward to Never use the same lower anchorage to attach more allow more room for the child seat.
Page 82 80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE How To Stow An Unused Switchable-ALR (ALR) WARNING! (Continued) Seat Belt • Child restraint anchorages are designed to withstand When using the LATCH attaching system to install a child only those loads imposed by correctly-fitted child restraint, stow all ALR seat belts that are not being used by restraints.
Page 83 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81 The seat belts in the passenger seating positions are Lap/Shoulder Belt Systems For Installing Child equipped with either a Switchable Automatic Locking Restraints In This Vehicle Retractor (ALR) or a cinching latch plate or both. Both types of seat belts are designed to keep the lap portion of the seat belt tight around the child restraint so that it is not necessary to use a locking clip.
Page 84 82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Quad Cab/Mega Cab/Crew Cab Automatic Locking Retractor (ALR) Locations • Cinch = Cinching Latch Plate • ALR = Switchable Automatic Locking Retractor • Top Tether Anchorage Symbol Frequently Asked Questions About Installing Child Restraints With Seat Belts What is the weight limit (child’s Weight limit of the Child Restraint Always use the tether anchor when...
Page 85 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 83 Frequently Asked Questions About Installing Child Restraints With Seat Belts Can the rear-facing child restraint Contact between the front passenger touch the back of the front passenger seat and the child restraint is al- seat? lowed, if the child restraint manufac- turer also allows contact.
Page 86 84 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 1. For Crew, Mega, And Quad Cab Models out of the retractor. Then, allow the webbing to retract back into the retractor. As the webbing retracts, you will Place the child seat in the center of the seating position. For hear a clicking sound.
Page 87 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 85 Installing A Child Restraint With A Cinching Latch 3. Slide the latch plate into the buckle until you hear a Plate (CINCH) — If Equipped: “click.” Child restraint systems are designed to be secured in 4.
Page 88 86 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If the buckle or the cinching latch plate is too close to the WARNING! (Continued) belt path opening of the child restraint, you may have behind the top of the vehicle seat. See the section trouble tightening the seat belt.
Page 89 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 87 3. Lift the cover (if so equipped), and attach the hook to the square opening in the sheet metal. Tighten the tether strap according to the child seat manufacturer’s instructions. Regular Cab Tether Anchorages 1 —...
Page 90 88 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Quad Cab Or Crew Cab Trucks: The top tether anchorages in this vehicle are tether strap loops located between the rear glass and the back of the rear seat. There is a tether strap loop located behind each seating position.
Page 91 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 89 Tether Strap Through Outboard Tether Strap Loop Tether Strap Through Outboard Tether Strap Loop And Attached To Center Tether Strap Loop 4. Attach the hook to the center tether strap loop (see NOTE: If there are child seats in both of the outboard (left diagram).
Page 92 90 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Center Seat: 3. Pass the tether strap hook under the head restraint behind the child seat, though the tether strap loop 1. Raise the head restraint and reach between the rear seat behind the seat and over to the right or left outboard and rear glass to access the tether strap loop.
Page 93 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 91 4. Attach the hook to the outboard tether strap loop (see 3. Place a child restraint on the center rear seat. Route the diagram). Tighten the tether strap according to the child tether strap following the directions for the center seat manufacturer’s instructions.
Page 94: Transporting Pets
92 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Drive moderately during the first 300 miles (500 km). After WARNING! the initial 60 miles (100 km), speeds up to 50 or 55 mph (80 • An incorrectly anchored tether strap could lead to or 90 km/h) are desirable.
Page 95: Safety Tips
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 93 SAFETY TIPS WARNING! (Continued) Transporting Passengers Breathing it can make you unconscious and can even- tually poison you. To avoid breathing (CO), follow NOTE: Never transport passengers in the cargo area. these safety tips: •...
Page 96: Safety Checks You Should Make Inside The Vehicle
94 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE loose connections could permit exhaust fumes to seep into the light comes on intermittently or remains on while the passenger compartment. In addition, inspect the ex- driving, have an authorized dealer service the vehicle haust system each time the vehicle is raised for lubrication immediately.
Page 97 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 95 WARNING! WARNING! (Continued) vehicle properly parked with the engine off, fully An improperly attached, damaged, folded, or stacked depress the accelerator, the brake, and the clutch floor mat, or damaged floor mat fasteners may cause pedal (if present) to check for interference.
Page 98: Periodic Safety Checks You Should Make Outside
96 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lights WARNING! (Continued) Have someone observe the operation of brake lights and interference with the accelerator, brake, or clutch exterior lights while you work the controls. Check turn pedals then re-install the floor mats. signal and high beam indicator lights on the instrument •...
Page 99: Understanding The Features Of Your Vehicle
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS ▫ Illuminated Vanity Mirror — If Equipped ..114 MIRRORS ......102 ▫...
Page 100 98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Programming The Memory Feature ..129 ▫ Battery Saver ......138 ▫...
Page 101 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 99 DRIVER ADJUSTABLE PEDALS — IF PARKSENSE FRONT AND REAR PARK ASSIST — IF EQUIPPED ......148 EQUIPPED .
Page 102 100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Canadian/Gate Operator Programming ..174 CIGAR LIGHTER AND ASH RECEIVER — IF EQUIPPED ......184 ▫...
Page 103 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 101 ▫ Plastic Grocery Bag Retainers (Regular Cab ▫ Bed Extender — If Equipped....206 Models) ......195 ▫...
Page 104: Mirrors
102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE MIRRORS Automatic Dimming Mirror — If Equipped The mirror head can be adjusted up, down, left, and right Inside Day/Night Mirror — If Equipped for various drivers. The mirror should be adjusted to center The mirror head can be adjusted up, down, left, and right on the view through the rear window.
Page 105 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103 NOTE: • Your vehicle may be transmitting data as authorized by the subscriber. • The 9–1–1 and ASSIST buttons will only function if you are connected to an operable 1X(voice/data) or 3G(data) network. Other Uconnect services will only be operable if your Uconnect Access service is active and you are connected to an operable 1X(voice/data) or 3G(data) network.
Page 106 104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 9-1-1 Call 4. You should be able to speak with the 9-1-1 operator through the vehicle audio system to determine if addi- 1. Push the 9-1-1 Call button on the rearview mirror. tional help is needed. NOTE: In case the 9-1-1 Call button is pushed in error, there will be a 10 second delay before the 9-1-1 Call system WARNING!
Page 107 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105 5. The 9-1-1 operator may attempt to contact appropriate WARNING! (Continued) emergency responders and provide them with impor- can cause the 9-1-1 Call system to fail, never add tant vehicle information and GPS coordinates. aftermarket equipment (e.g., two-way mobile radio, CB radio, data recorder, etc.) to your vehicle’s electri- WARNING!
Page 108 106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The rearview mirror light located between the ASSIST • Delayed accessories mode is active. and 9-1-1 buttons will continuously be illuminated red. • The ignition is in the OFF position. • The device screen will display the following message •...
Page 109: Automatic Dimming Mirror With Rear View Camera Display - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 NOTE: CAUTION! • Your vehicle may be transmitting data as authorized by To avoid damage to the mirror during cleaning, never the subscriber. spray any cleaning solution directly onto the mirror. • Never place anything on or near the vehicle’s 1X(voice/ Apply the solution onto a clean cloth and wipe the data) or 3G(data) and GPS antennas.
Page 110: Outside Mirrors
108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE When the vehicle is placed into reverse gear, a video NOTE: If your vehicle is equipped with illuminated ap- display illuminates to display the image generated by the proach lights under the outside mirrors, they can be turned rear view camera located on the tailgate handle.
Page 111: Tilt Side Mirrors In Reverse - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 mirrors will then return to the original position when the vehicle is shifted out of the REVERSE position. Each stored memory setting will have an associated Tilt Side Mirrors in Reverse position. NOTE: The Tilt Side Mirrors in Reverse feature is not turned on when delivered from the factory.
Page 112 110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The mirrors are accidentally blocked while folding. Push the switch once and the mirrors will fold in, push the switch a second time and the mirrors will return to the • The mirrors are accidentally manually folded/unfolded. normal driving position.
Page 113: Power Mirrors - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 Power Mirrors — If Equipped The power mirror controls consist of mirror select buttons and a four-way mirror control switch. The controls for the power mirrors are located on the driver’s door trim panel. Power Mirror Controls Power Mirror Controls Location 1 —...
Page 114: Heated Mirrors - If Equipped
112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To adjust a mirror, push either the L (left) or R (right) Heated Mirrors — If Equipped button to select the mirror that you want to adjust. Using the mirror control switch, push on any of the four These mirrors are heated to melt frost or ice.
Page 115: Trailer Towing Mirrors - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 Trailer Towing Mirrors — If Equipped NOTE: Fold the trailer towing mirrors rearward prior to entering an automated car wash. These mirrors are designed with an adjustable mirror head to provide a greater vision range when towing extra-wide A small blindspot mirror is located next to main mirror and loads.
Page 116: Illuminated Vanity Mirror - If Equipped
114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Illuminated Vanity Mirror — If Equipped To use the “Slide-On-Rod” feature, rotate the sun visor downward and unclip it. Pull the sun visor along the Illuminated vanity mirrors are located on each sun visor. To “Slide-On-Rod”...
Page 117: Driver's Power Seat - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 WARNING! • It is dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed.
Page 118 116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Adjusting The Seat Up Or Down WARNING! (Continued) The height of the seats can be adjusted up or down. Pull • Seats should be adjusted before fastening the seat upward or push downward on the seat switch. The seat belts and while the vehicle is parked.
Page 119: Passenger's Power Seat - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 Passenger’s Power Seat — If Equipped Some models are equipped with a six-way power passen- ger seat. The power seat switch is located on the outboard side of the seat. The switch is used to control the movement of the seat and seat cushion.
Page 120 118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Press the heated seat button a second time to turn WARNING! the LO setting on. • Persons who are unable to feel pain to the skin • Press the heated seat button a third time to turn the because of advanced age, chronic illness, diabetes, heating elements off.
Page 121: Ventilated Seats - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 If your vehicle is not equipped with a touchscreen, this NOTE: feature can be programmed through the instrument cluster • Once a heat setting is selected, heat will be felt within display. Refer to “Instrument Cluster Display” in “Under- two to five minutes.
Page 122: Manual Seat Adjuster - If Equipped
120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If your vehicle is equipped with a touchscreen, the front Manual Seat Adjuster — If Equipped ventilated seats control buttons are also located within the Both front seats are adjustable forward or rearward. The climate or controls screen of the touchscreen.
Page 123: 40-20-40 Front Bench Seat - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 While sitting in the seat, pull up on the handle and slide the WARNING! seat forward or rearward. Release the bar once you have • Do not stand or lean in front of the seat while reached the desired position.
Page 124: Mega Cab Rear Seat Features
122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Mega Cab Rear Seat Features WARNING! Reclining Rear Seats — If Equipped Do not ride with the seatback reclined so that the The recliner handle is located on the outside of the seat shoulder belt is no longer resting against your chest.
Page 125 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 2. Fold the seatback forward. Folding Rear Seat — If Equipped Both the outboard rear seats will drop and move forward when the seatback is folded flat. WARNING! • It is dangerous to ride in a cargo area, inside or outside of a vehicle.
Page 126 124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To fold either rear seat flat: 1. Lift the handle, located on the outboard side of either of the rear seats. Rear Passenger Fold-Flat Seats 3. Lift the seatback, to return the seat to the upright position.
Page 127: Head Restraints
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 WARNING! WARNING! (Continued) • Head restraints should never be adjusted while the An improperly latched seat could cause serious injury vehicle is in motion. Driving a vehicle with the head or death. Make sure that the seatback is securely restraints improperly adjusted or removed could locked into position.
Page 128 126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To remove the head restraint, raise it up as far as it can go. WARNING! Then, push the adjustment button and the release button at • A loose head restraint thrown forward in a collision the base of each post while pulling the head restraint up.
Page 129 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 To remove the head restraint, push the adjustment button and the release button while pulling upward on the whole assembly. To reinstall the head restraint, put the head restraint posts into the holes and adjust it to the appropri- ate height.
Page 130: Driver Memory Seat - If Equipped
128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: remote keyless entry key fob can also be programmed to recall the same positions when the unlock button is • The rear center head restraint (Crew Cab and Quad Cab) pushed. has only one adjustment position that is used to aid in the routing of a tether.
Page 131: Programming The Memory Feature
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 Programming The Memory Feature Linking And Unlinking The Remote Keyless Entry Key Fob To Memory To create a new memory profile, perform the following: Your key fobs can be programmed to recall one of two 1.
Page 132: Memory Position Recall
130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To program your key fobs, perform the following: Memory Position Recall 1. Cycle the vehicle’s ignition to the OFF position. NOTE: • For vehicles equipped with an automatic transmission, 2. Select desired memory profile (1) or (2). the vehicle must be in PARK to recall memory positions.
Page 133: Easy Entry/Exit Seat
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 • When you remove the key fob from the ignition (or Driver Two Memory Position Recall change the ignition to OFF, for vehicles equipped with • To recall the memory setting for driver two using the Keyless Enter-N-Go), the driver’s seat will move about memory switch, push memory button (2) on the 2.4 inches (60 mm) rearward if the driver’s seat position...
Page 134: To Open And Close The Hood
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Each stored memory setting will have an associated Easy Entry and Easy Exit position. NOTE: The Easy Entry/Exit feature is not enabled when the vehicle is delivered from the factory. The Easy Entry/ Exit feature is enabled (or later disabled) through the programmable features in the Uconnect system.
Page 135: Lights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 CAUTION! To prevent possible damage, do not slam the hood to close it. Use a firm downward push at the front center of the hood to ensure that both latches engage. LIGHTS The headlight switch is located on the left side of the instrument panel, next to the steering wheel.
Page 136: Headlights
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Your vehicle is equipped with plastic headlight and fog Headlights light (if equipped) lenses that are lighter and less suscep- tible to stone breakage than glass lights. Plastic is not as To turn on the headlights, rotate the headlight scratch resistant as glass and therefore different lens clean- switch clockwise to the headlight position.
Page 137: Headlights On With Wipers (Available With Automatic Headlights Only)
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 the headlight switch is placed in the AUTO position. In addition, the headlights will turn off when the wipers are turned off, if they were turned on by this feature. NOTE: If your vehicle is equipped with a touchscreen, this feature can be programmed through the Uconnect system.
Page 138: Headlight Delay
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Headlight Delay mounted on the inside rearview mirror. This camera de- tects vehicle specific light and automatically switches from To aid in your exit, your vehicle is equipped with a high beams to low beams until the approaching vehicle is headlight delay that will leave the headlights on for out of view.
Page 139: Parking Lights And Panel Lights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 lever six full on/off cycles within 10 seconds of ignition NOTE: This system will not activate until the vehicle is at ON. System will return to default setting upon ignition or above 20 mph (32 km/h). off.
Page 140: Fog Lights - If Equipped
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Fog Lights — If Equipped Lights-On Reminder The fog lights are turned on by rotating the headlight If the headlights, parking lights, or cargo lights are left on switch to the parking light or headlight position and after the ignition is turned off, a chime will sound when the pushing in the headlight rotary control.
Page 141: Interior Lights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 Interior Lights NOTE: If your vehicle is equipped with a touchscreen, the dimming of the touchscreen is programmable through the Courtesy and dome lights are turned on when the front Uconnect system. Refer to “Uconnect Settings ” in “Under- doors are opened, when the dimmer control (rotating standing Your Instrument Panel”...
Page 142 140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Courtesy/Reading Lights Both lights in the overhead console and rear passenger compartment will illuminate as courtesy lights when a door is opened, when the dimmer control is rotated to the courtesy light position (full right position), or when the unlock button is pushed on the Remote Keyless Entry key fob, if equipped.
Page 143: Cargo Light With Bed Lights - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 Ambient Light Cargo Lights Button Cargo Light With Bed Lights — If Equipped The cargo light and bed lights (if equipped) will also turn on for approximately 60 seconds when a key fob unlock The cargo light and bed lights (if equipped) are turned on button is pushed, as part of the Illuminated Entry feature.
Page 144: Turn Signals
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Turn Signals NOTE: If either light remains on and does not flash, or there is a very fast flash rate, check for a defective outside Move the multifunction lever up or down and the arrows light bulb.
Page 145: High/Low Beam Switch
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 High/Low Beam Switch Push the multifunction lever toward the instrument panel WINDSHIELD WIPERS AND WASHERS to switch the headlights to high beam. Pulling the multi- Windshield Wipers function lever back toward the steering wheel will turn the low beams back on, or shut the high beams off.
Page 146: Windshield Wiper Operation
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Windshield Wiper Operation second detent. Washer fluid will be sprayed and the wiper will operate for two to three cycles after the washer knob is Rotate the end of the lever upward, to the first detent past released from this position.
Page 147: Mist Feature
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 Mist Feature display. Refer to “Instrument Cluster Display” in “Under- standing Your Instrument Panel” for further information. When a single wipe to clear off road mist or spray from a passing vehicle is needed, push the washer knob, located The sensitivity of the system can be adjusted with the on the end of the multifunction lever, inward to the first multifunction lever.
Page 148: Tilt Steering Column
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE until the wiper switch is moved, vehicle speed is greater Release the lever to lock the steering column firmly in than 0 mph (0 km/h), or the outside temperature is place. greater than 32°F (0°C). •...
Page 149: Heated Steering Wheel - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 HEATED STEERING WHEEL — IF EQUIPPED Vehicles Equipped With Remote Start The steering wheel contains a heating element that helps On models that are equipped with remote start, the heated warm your hands in cold weather. The heated steering steering wheel can be programmed to come on during a wheel has only one temperature setting.
Page 150: Driver Adjustable Pedals - If Equipped
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) • Do not place anything on the steering wheel that insulates against heat, such as a blanket or steering wheel covers of any type and material. This may cause the steering wheel heater to overheat. DRIVER ADJUSTABLE PEDALS —...
Page 151: Speed Control
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 NOTE: CAUTION! • Always adjust the pedals to a position that allows full Do not place any article under the adjustable pedals or pedal travel. impede its ability to move as it may cause damage to •...
Page 152: To Activate
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Activate Push the ON/OFF button. The cruise control indicator light in the instrument cluster display will illuminate. To turn the system off, push the ON/OFF button a second time. The cruise control indicator light will turn off. The system should be turned off when not in use.
Page 153: To Deactivate
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 To Deactivate U.S. Speed (mph) • Pushing the RES (+) button once will result in a 1 mph A soft tap on the brake pedal, pushing the CANC button or increase in set speed. Each subsequent tap of the button normal brake pressure while slowing the vehicle will results in an increase of 1 mph.
Page 154: To Accelerate For Passing
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE U.S. Speed (mph) NOTE: The Speed Control system maintains speed up and down hills. A slight speed change on moderate hills is • Pushing the SET (-) button once will result in a 1 mph normal.
Page 155: Parksense Sensors
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 ParkSense will retain the last system state (enabled or ParkSense Warning Display disabled) from the last ignition cycle when the ignition is The ParkSense Warning screen is located within the instru- changed to the ON/RUN position. ment cluster display.
Page 156 154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The system will indicate a detected obstacle by showing a single arc in the left and/or right rear regions based on the object’s distance and location relative to the vehicle. If an object is detected in the left and/or right rear region, the display will show a single solid arc in the left and/or right rear region and the system will produce a tone.
Page 157 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 Fast Tone Continuous Tone...
Page 158 156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The vehicle is close to the obstacle when the warning display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert opera- tion when the system is detecting an obstacle: WARNING ALERTS Rear Distance Greater than...
Page 159: Enabling And Disabling Parksense
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 Enabling And Disabling ParkSense If the ParkSense switch is pushed, and the system is disabled or requires service, the ParkSense switch LED will ParkSense can be enabled and disabled with the ParkSense blink momentarily, and then the LED will be on. switch.
Page 160: Cleaning The Parksense System
158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If PARKSENSE UNAVAILABLE SERVICE REQUIRED cluster display will show the PARKSENSE OFF mes- appears in the instrument cluster display, see your autho- sage for as long as the vehicle is in REVERSE. rized dealer. •...
Page 161 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 WARNING! CAUTION! • Drivers must be careful when backing up even when • ParkSense is only a parking aid and it is unable to using ParkSense. Always check carefully behind recognize every obstacle, including small obstacles. your vehicle, look behind you, and be sure to check Parking curbs might be temporarily detected or not for pedestrians, animals, other vehicles, obstructions,...
Page 162: Parksense Front And Rear Park Assist - If Equipped
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE PARKSENSE FRONT AND REAR PARK ASSIST — ParkSense Sensors IF EQUIPPED The four ParkSense sensors, located in the rear fascia/ The ParkSense Park Assist system provides visual and bumper, monitor the area behind the vehicle that is within audible indications of the distance between the rear and/or the sensors’...
Page 163: Parksense Display
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 The ParkSense Warning screen will only be displayed if If an obstacle is detected in the left and/or right rear Sound and Display is selected. region, the display will show a single arc in the left and/or right rear region and the system will produce a tone.
Page 164 162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING ALERTS Rear Distance Greater than 79 79-45 inches 45-31 inches 31-18 inches Less than 18 (inches/cm) inches (200 cm) (200-115 cm) (115-80 cm) (80-45 cm) inches (45 cm) Front Distance Greater than 47 47-39 inches 39-25 inches 25-12 inches...
Page 165: Enabling And Disabling Front And/Or Rear Parksense
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 cluster display. Refer to “Instrument Cluster Display” in NOTE: Arc alerts from the enabled ParkSense system, will “Understanding Your Instrument Panel” for further in- interrupt the five second messages, and the instrument formation. cluster display will show the vehicle graphic with the corresponding arcs and OFF message.
Page 166: Cleaning The Parksense System
164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE SENSORS or PARKSENSE UNAVAILABLE SERVICE RE- If the PARKSENSE UNAVAILABLE SERVICE RE- QUIRED pop up message for five seconds. After five QUIRED message appears in the instrument cluster dis- seconds, a vehicle graphic will be displayed with UN- play, see an authorized dealer.
Page 167 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 • On vehicles equipped with a tailgate, ParkSense should instrument cluster display will show the FRONT PARKSENSE OFF or REAR PARKSENSE OFF mes- be disabled when the tailgate is in the lowered or open sage for five seconds, followed by a vehicle graphic with position.
Page 168: Parkview Rear Back Up Camera - If Equipped
166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Uconnect screen (if equipped) along with a caution note to CAUTION! “check entire surroundings” across the top of the screen. • ParkSense is only a parking aid and it is unable to After five seconds this note will disappear. recognize every obstacle, including small obstacles.
Page 169 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 NOTE: If the vehicle speed remains below 8 mph active guide lines will show separate zones that will help (13 km/h), the Rear View Camera image will be displayed indicate the distance to the rear of the vehicle. continuously until deactivated via the touchscreen button NOTE: For further information about how to access and change the programmable features of the ParkView Rear...
Page 170: Overhead Console - If Equipped
168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: If snow, ice, mud, or any foreign substance builds WARNING! up on the camera lens, clean the lens, rinse with water, and dry with a soft cloth. Do not cover the lens. Drivers must be careful when backing up even when using the ParkView Rear Back Up Camera.
Page 171: Courtesy/Reading Lights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 • Power Sliding Rear Window Switch — If Equipped Courtesy/Reading Lights • Universal Garage Door Opener — If Equipped Both lights in the overhead console and rear passenger compartment will illuminate as courtesy lights when a door is opened, when the dimmer control is rotated to the courtesy light position (full right position), or when the unlock button is pushed on the Remote Keyless Entry key...
Page 172: Garage Door Opener - If Equipped
170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The HomeLink buttons that are located in the overhead console designate the three different HomeLink channels. Rear Passenger Courtesy/Reading Light NOTE: The courtesy/reading lights will remain on until the switch is pushed a second time, so be sure they have HomeLink Buttons been turned off before leaving the vehicle.
Page 173: Before You Begin Programming Homelink
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 For efficient programming and accurate transmission of WARNING! (Continued) the radio-frequency signal it is recommended that a new this transceiver with a garage door opener that has a battery be placed in the hand-held transmitter of the device “stop and reverse”...
Page 174: Programming A Rolling Code
172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Programming A Rolling Code 1. Turn the ignition switch to the ON/RUN position. For vehicle’s equipped with Keyless Enter-N-Go, place the For programming garage door openers that were manufac- ignition in the RUN position with the Engine ON. tured after 1995.
Page 175: Programming A Non-Rolling Code
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 garage door openers/devices there may be a light that 2. Push and hold the desired HomeLink button until the blinks when the garage door opener/device is in the indicator light begins to flash after 20 seconds. Do not LEARN/TRAIN mode.
Page 176: Canadian/Gate Operator Programming
174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: 3. Without releasing the button proceed with “Program- ming A Non-Rolling Code” step 2 and follow all remain- • It may take up to 30 seconds or longer in some cases ing steps. for the channel to train.
Page 177: Using Homelink
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 3. Push and hold the HomeLink button while you push 1. Turn the ignition switch to the ON/RUN position. and release (“cycle”), your hand - held transmitter every For vehicle’s equipped with Keyless Enter-N-Go, place the two seconds.
Page 178: Troubleshooting Tips
176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CHANNELS.” Release the buttons when the instrument WARNING! cluster display shows “CHANNELS CLEARED.” • Vehicle exhaust contains carbon monoxide, a danger- The HomeLink Universal Transceiver is disabled when the ous gas. Do not run your vehicle in the garage while Vehicle Security Alarm is active.
Page 179: General Information
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177 General Information This device complies with FCC rules Part 15 and Industry Canada RSS-210. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, in- cluding interference that may cause undesired opera- tion.
Page 180: Opening Sunroof - Manual Mode
178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Opening Sunroof — Express WARNING! (Continued) Push the switch rearward and release it within one-half • In a collision, there is a greater risk of being thrown second and the sunroof will open automatically from any from a vehicle with an open sunroof.
Page 181: Venting Sunroof - Express
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179 NOTE: If three consecutive sunroof close attempts result in to minimize the buffeting. If the buffeting occurs with the Pinch Protect reversals, Pinch Protect will disable, and the sunroof open, adjust the sunroof opening to minimize the sunroof must be closed in Manual Mode.
Page 182 180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE A key symbol indicates that the key must be in the The auxiliary power outlets can be found in the following ON/RUN or ACC positions for the outlet to provide locations: power. The battery symbol indicates that the outlet is •...
Page 183 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 181 • Center console when equipped with bucket seats. • Inside the upper lid of the center storage compartment — if equipped. Power Outlet — Center Console USB Port (Charge Only) — Upper Lid...
Page 184 182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Rear of the center console storage compartment — Quad Cab or Crew Cab. Power Outlet — Rear Center Console Fuse Power Outlet — Rear Center Console...
Page 185 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 183 WARNING! To avoid serious injury or death: • Only devices designed for use in this type of outlet should be inserted into any 12 Volt outlet. • Do not touch with wet hands. •...
Page 186: Cigar Lighter And Ash Receiver - If Equipped
184 UNDERSTANDING THE FEATURES OF YOUR VEHICLE power inverter will automatically shut down. Once the CAUTION! (Continued) electrical device has been removed from the outlet the • After the use of high power draw accessories, or long inverter should automatically reset. periods of the vehicle not being started (with acces- sories still plugged in), the vehicle must be driven a sufficient length of time to allow the generator to...
Page 187: Auxiliary Switches - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 185 NOTE: Holding last state conditions are met when switch WARNING! type is set to latching and power source is set to ignition. To avoid serious injury or death: For further information on using the auxiliary switches, •...
Page 188: Front Instrument Panel Cupholders - Floor Storage Bin
186 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Front Instrument Panel Cupholders — Floor Rear Cupholders — If Equipped Storage Bin Some vehicles are equipped with rear cupholders located For vehicles equipped with bucket seats, two cupholders in the center armrest. are located next to the center console storage bin.
Page 189: Storage
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 187 Some vehicles may be equipped with a rear cupholder that STORAGE consists of two cup wells for rear passenger convenience. Glove Compartment The glove compartment is located on the passenger side of the instrument panel and features both an upper and lower storage area.
Page 190 188 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To open the upper glove compartment, push upward on To open the lower glove compartment, pull the release the handle release. The glove compartment door will handle. automatically open. Lower Glove Compartment Upper Glove Compartment...
Page 191: Door Storage
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 189 Door Storage Rear Door Storage — If Equipped Storage compartments are located in both the driver and Front Door Storage — If Equipped passenger rear door trim panels. Storage areas and bottle holders (driver’s side only) are located in the door trim panels.
Page 192: Center Storage Compartment - If Equipped
190 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Center Storage Compartment — If Equipped WARNING! The center storage compartment is located between the • This armrest is not a seat. Anyone seated on the driver and passenger seats. The storage compartment armrest could be seriously injured during vehicle provides an armrest and contains both and upper and operation, or a collision.
Page 193 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 191 Upper Storage Compartment Lower Storage Bin With the upper lid closed, pull on the lower handle to open WARNING! the lower storage bin. Do not operate this vehicle with a console compart- ment lid in the open position. Driving with the console compartment lid open may result in injury in a colli- sion.
Page 194: Second Row In-Floor Storage Bin - If Equipped.192
192 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The center console is equipped with a front storage bin Second Row In-Floor Storage Bin — If Equipped located next to the cupholders. This storage bin may be In-floor storage bins are located in front of the second row equipped with a manual sliding top door.
Page 195: Seatback Storage
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 193 NOTE: The front seat may have to be moved forward to Seatback Storage fully open the lid. Located in the back of both the driver and passenger front seats are pockets that can be used for storage. Opened Storage Bin Driver’s Side Seatback Storage...
Page 196: Storage (Regular Cab)
194 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Storage (Regular Cab) To open the storage compartments, unsnap the securing snap located at either side of the load floor and lift upward The storage bin is located behind the front seats and runs on the fold flat lid.
Page 197: Plastic Grocery Bag Retainers (Regular Cab Models)
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 195 Plastic Grocery Bag Retainers (Regular Cab defroster automatically turns off after approximately 10 minutes. For an additional five minutes of operation, push Models) the button a second time. Retainer hooks which will hold plastic grocery bag handles are built into the back panel of the cab, behind the rear seat.
Page 198: Power Sliding Rear Window - If Equipped
196 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Power Sliding Rear Window — If Equipped Manual Sliding Rear Window — If Equipped The switch for the power sliding rear window is located on A locking device in the center of the window helps to the overhead console.
Page 199 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 197 Unfolding The Load Floor/Quad Cab 2. Grasp the knob on the load floor and lift the knob until the load floor unfolds into position. 1. Lift the 60/40 seat cushion(s) to the upward position. Load Floor In Open Position Unfolding The Load Floor 3.
Page 200 198 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Unfolding The Load Floor/Crew Cab 2. Unfold both the legs using the straps. 1. Lift the 60/40 seat cushion(s) to the upward position. Load Floor Legs In Opened Position Load Floor Legs In Stowed Position...
Page 201 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 199 3. Lift the front panel until the load floor unfolds into 3. Lift the load floor up to access storage under the load position. floor. WARNING! Do not drive with the load floor in the up position. When stopping fast or in an accident, the load floor could move to the down position causing serious injury.
Page 202: Pickup Box
200 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Crew Cab — If Equipped Pick Up Box Features Load Floor Securing Straps/Crew Cab 1 — Upper Load Floor Indents 4. Reverse the procedure to put the load floor back in the 2 — Bulk Head Dividers 3 —...
Page 203: Cargo Camera - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 201 box in the indentations provided above the wheel housings There are stampings in the sheet metal on the inner side and in the bulkhead dividers to form the floor. bulkheads of the box in front of and behind both wheel housings.
Page 204: Turning Cargo Camera On Or Off - With Uconnect 8.4/8.4 Nav
202 UNDERSTANDING THE FEATURES OF YOUR VEHICLE A touchscreen button X to disable display of the camera NOTE: Once initiated by the Cargo Camera button, the image is made available when the vehicle is not in RE- Cargo Camera image may be deactivated by pressing the VERSE gear.
Page 205 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 203 To open a storage bin with the RamBox unlocked, push and release the button located on the lid. The RamBox lid will open upward to allow hand access. Lift the lid to fully open.
Page 206: Locking And Unlocking Rambox
204 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The interior of the RamBox will automatically illuminate CAUTION! (Continued) when the lid is opened. In addition to the automatic is required to stay open for extended periods of time, it illumination switch, there is a manual on/off switch lo- is recommended that the bin lights be turned off cated at the rear of each storage bin.
Page 207: Rambox Safety Warning
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 205 CAUTION! WARNING! • Ensure cargo bin lids are closed and latched before • Always close the storage bin covers when your moving or driving vehicle. vehicle is unattended. • Loads applied to the top of the bin lid should be •...
Page 208: Bed Extender - If Equipped
206 UNDERSTANDING THE FEATURES OF YOUR VEHICLE RamBox Storage Bin Cover Emergency Release Lever Bed Extender — If Equipped — If Equipped The bed extender has three functional positions: As a security measure, a Storage Bin Cover Emergency • Storage Position Release is built into the storage bin cover latching mecha- •...
Page 209 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 207 Center Handle And Lock Storage Position 1 — Center Handle Lock 2 — Handle 2. With the side gates open, position the extender fully forward in the bed against the front panel.
Page 210 208 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Rotate the side gates closed allowing the outboard ends to be positioned in front of the cargo tie down loops. Side Gates Closed 5. Lock the center handle using the vehicle key to secure the panel into place.
Page 211 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 209 To install the bed extender into a divider position, perform 2. With the side gates open, position the extender so the the following: outboard ends align with the intended slots in the sides of the bed.
Page 212 210 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Rotate the side gates closed so that the outboard ends Extender Position are secured into the intended slots of the bed. The extender position allows you to load the bed of the truck beyond the tail gate.
Page 213 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 211 To install the bed extender into the extender position, perform the following: 1. Lower the tailgate. 2. Make sure the center handle is unlocked and rotate the center handle vertically in order to release the extender side gates.
Page 214: Bed Rail Tie-Down System
212 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) • When not in use, the extender/divider should be in stowed or divider position with the tailgate closed. • When in use all handles are to be in the locked position. Bed Rail Tie-Down System CAUTION! The maximum load per cleat should not exceed 250 lbs...
Page 215: Slide-In Campers
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 213 Adjustable Cleat Assembly Utility Rail End Cap SLIDE-IN CAMPERS 1 — Utility Rail Detent 2 — Cleat Retainer Nut Camper Applications 3 — Utility Rail Cleat Certain truck models are not recommended for slide-in campers.
Page 216: Easy-Off Tailgate
214 UNDERSTANDING THE FEATURES OF YOUR VEHICLE EASY-OFF TAILGATE To simplify mounting of a camper unit with an overhang, the tailgate can be removed. NOTE: If your vehicle is equipped with a rear camera or Remote Keyless Entry, the electrical connector must be disconnected prior to removing the tailgate.
Page 217: Removing The Tailgate
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 215 6. Tape the tailgate harness and bracket against the forward-facing surface of the tailgate. This will prevent damaging the connector and bracket when storing or reinstalling the tailgate. Removing The Tailgate 1. Disconnect the wiring harness for the rear camera and or power locks (if equipped), refer to “Disconnecting the Rear Camera —...
Page 218: Locking Tailgate
216 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Make sure tailgate is supported when removing NOTE: Do not carry the tailgate loose in the truck pickup box. support cables. WARNING! To avoid inhaling carbon monoxide, which is deadly, the exhaust system on vehicles equipped with “Cap or Slide-In Campers”...
Page 219: Tri-Fold Tonneau Cover Removal
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 217 NOTE: The Tonneau Cover can be folded up and secured 2. Pull down on the first set of clamps on both driver and at the front of the box without removing completely. passenger sides to the semi clamped position. Tri-Fold Tonneau Cover Removal To remove the Tonneau Cover follow the following steps: 1.
Page 220 218 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Pull down on the clamp wire and push the clamp up into the proper released position. Improper Clamp Wire Released Position CAUTION! Proper Released Position Make sure the tonneau cover clamp and clamp wire is NOTE: Be sure the clamp and clamp wire is in the proper in the proper released position.
Page 221 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 219 4. Pick up on the tonneau cover and fold it back onto the 7. Pull down on the clamp wire and push the clamp up second panel. into the proper released position. 5. Pick up on the cover and fold it back onto the third panel.
Page 222: Tri-Fold Tonneau Cover Installation
220 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 8. Be sure to clip both stowage straps together to insure the 1. Position the folded Tonneau Cover on the truck bed and cover stays together. push the cover forward against the front of the truck bed.
Page 223 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 221 3. Push clamp wires up and under the flange of box (or 4. Push clamp handles upward to the clamped position to flange of Ram Box rail, if equipped) to the semi clamped properly engage the clamps.
Page 224 222 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Once clamped, be sure the clamps are not partially NOTE: The vehicle cannot be driven when the Tonneau clamped to the truck bed flange. Cover is in this position. Improper Clamp Position Intermediate Position (Vehicle Cannot Be Driven) 5.
Page 225 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 223 7. Completely unfold the Tonneau Cover. 8. Pull down on the second set of clamp handles to release the clamps from the stowed position. Fully Unfolded Position Stowed Position...
Page 226 224 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 9. Push clamp wires up and under the flange of box (or flange of Ram Box rail, if equipped) to the semi clamped position. Clamped Position NOTE: Once clamped, be sure the clamps are not partially clamped to the truck bed flange.
Page 227 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 225 Improper Clamp Position Locking Hole The Tonneau Cover clamps can be locked when in the CAUTION! clamped position by placing a lock through the locking hole. It is the driver’s responsibility to ensure the Tonneau Cover is properly installed on the vehicle.
Page 228: Tri-Fold Tonneau Cover Cleaning
226 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Tri-Fold Tonneau Cover Cleaning For proper cleaning of the Tonneau Cover, use MOPAR Whitewall & Vinyl Top Cleaner and MOPAR Leather & Vinyl Conditioner/Protectant.
Page 229 UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS ▫ Instrument Cluster Display Messages ..273 INSTRUMENT PANEL FEATURES ...229 ▫ Battery Saver On/Battery Saver Mode Message — INSTRUMENT CLUSTER .
Page 230 228 UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Radio Operation......318 ▫ Media .......344 ▫...
Page 231: Instrument Panel Features
UNDERSTANDING YOUR INSTRUMENT PANEL 229 INSTRUMENT PANEL FEATURES 1 — Headlight Switch 7 — 115v Power Inverter Outlet 13 — Gear Selector/Transfer Case Position Switch — If Equipped 2 — Instrument Cluster 8 — Power Outlet — If Equipped 14 — Ignition Switch 3 —...
Page 232: Instrument Cluster
230 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER Base Instrument Clusters • When the appropriate conditions exist, this display 1. Tachometer • Indicates the engine speed in revolutions per minute shows the instrument cluster display messages. Refer to “Instrument Cluster Display” in “Understanding (RPM x 1000).
Page 233 UNDERSTANDING YOUR INSTRUMENT PANEL 231 3. Speedometer WARNING! • Indicates vehicle speed. A hot engine cooling system is dangerous. You or 4. Fuel Gauge others could be badly burned by steam or boiling • The pointer shows the level of fuel in the fuel tank coolant.
Page 234 232 UNDERSTANDING YOUR INSTRUMENT PANEL Premium Instrument Clusters 1. Tachometer within the normal range if the battery is charged. If the • Indicates the engine speed in revolutions per minute pointer moves to either extreme left or right and remains there during normal driving, the electrical (RPM x 1000).
Page 235 UNDERSTANDING YOUR INSTRUMENT PANEL 233 NOTE: The voltmeter may show a gauge fluctuation at 6. Instrument Cluster Display various engine temperatures. This cycling operation is • When the appropriate conditions exist, this display caused by the post-heat cycle of the intake manifold heater shows the instrument cluster display messages.
Page 236: Warning And Indicator Lights
234 UNDERSTANDING YOUR INSTRUMENT PANEL WARNING AND INDICATOR LIGHTS WARNING! The warning/indicator lights switch on in the instrument A hot engine cooling system is dangerous. You or panel together with a dedicated message and/or acoustic others could be badly burned by steam or boiling signal when applicable.
Page 237: Red Telltale Indicator Lights
UNDERSTANDING YOUR INSTRUMENT PANEL 235 Red Telltale Indicator Lights Seat Belt Reminder Warning Light Red Telltale What It Means Light Seat Belt Reminder Warning Light When the ignition is first placed in the ON/RUN position, if the driver’s seat belt is unbuckled, a chime will sound and the light will turn on.
Page 238 236 UNDERSTANDING YOUR INSTRUMENT PANEL Brake Warning Light Red Telltale What It Means Light Brake Warning Light This light monitors various brake functions, including brake fluid level and parking brake appli- cation. If the brake light turns on it may indicate that the parking brake is applied, that the brake fluid level is low, or that there is a problem with the anti-lock brake system reservoir.
Page 239 UNDERSTANDING YOUR INSTRUMENT PANEL 237 Operation of the Brake Warning Light can be checked by WARNING! placing the ignition in the ON/RUN position. The light should illuminate for approximately two seconds. The light Driving a vehicle with the red brake light on is should then turn off unless the parking brake is applied or dangerous.
Page 240 238 UNDERSTANDING YOUR INSTRUMENT PANEL Brake Warning Light Red Telltale What It Means Light Brake Warning Light This light monitors various brake functions, including brake fluid level and parking brake appli- cation. If the brake light turns on it may indicate that the parking brake is applied, that the brake fluid level is low, or that there is a problem with the anti-lock brake system reservoir.
Page 241 UNDERSTANDING YOUR INSTRUMENT PANEL 239 ON/RUN position. The light should illuminate for ap- WARNING! proximately two seconds. The light should then turn off unless the parking brake is applied or a brake fault is Driving a vehicle with the red brake light on is detected.
Page 242 240 UNDERSTANDING YOUR INSTRUMENT PANEL Vehicle Security Warning Light — If Equipped Red Telltale What It Means Light Vehicle Security Warning Light — If Equipped This light will flash at a fast rate for approximately 15 seconds when the vehicle security alarm is arming, and then will flash slowly until the vehicle is disarmed.
Page 243 UNDERSTANDING YOUR INSTRUMENT PANEL 241 Battery Charge Warning Light Red Telltale What It Means Light Battery Charge Warning Light This light illuminates when the battery is not charging properly. If it stays on while the engine is running, there may be a malfunction with the charging system. Contact your authorized dealer as soon as possible.
Page 244 242 UNDERSTANDING YOUR INSTRUMENT PANEL Electronic Throttle Control (ETC) Warning Light Red Telltale What It Means Light Electronic Throttle Control (ETC) Warning Light This light informs you of a problem with the Electronic Throttle Control (ETC) system. If a problem is de- tected while the engine is running, the light will either stay on or flash depending on the nature of the problem.
Page 245 UNDERSTANDING YOUR INSTRUMENT PANEL 243 Trailer Brake Disconnected Warning Light Red Warning What It Means Light Trailer Brake Disconnected Warning Light This telltale is on when the Trailer Brake has been disconnected. Door Open Warning Light Red Telltale What It Means Light Door Open Warning Light This indicator will illuminate when a door is open and not fully closed.
Page 246: Yellow Telltale Indicator Lights
244 UNDERSTANDING YOUR INSTRUMENT PANEL Yellow Telltale Indicator Lights Engine Check/Malfunction Indicator Light (MIL) Yellow Telltale What It Means Light Engine Check/Malfunction Indicator Light (MIL) The Engine Check/Malfunction Indicator Light (MIL) is a part of an Onboard Diagnostic System called OBD II that monitors engine and automatic transmission control systems. The light will illuminate when the ignition is in the ON/RUN position before engine start.
Page 247 UNDERSTANDING YOUR INSTRUMENT PANEL 245 Electronic Stability Control (ESC) Indicator Light — If Equipped Yellow Telltale What It Means Light Electronic Stability Control (ESC) Indicator Light — If Equipped The “ESC Indicator Light” in the instrument cluster will come on when the ignition is placed in the ON/RUN position, and when ESC is activated.
Page 248 246 UNDERSTANDING YOUR INSTRUMENT PANEL Electronic Stability Control (ESC) OFF Indicator Light — If Equipped Yellow Telltale What It Means Light Electronic Stability Control (ESC) OFF Indicator Light — If Equipped This light indicates the Electronic Stability Control (ESC) is off. Low Washer Fluid Indicator Light —...
Page 249 UNDERSTANDING YOUR INSTRUMENT PANEL 247 Tire Pressure Monitoring System (TPMS) Warning Light Yellow Telltale What It Means Light Tire Pressure Monitoring System (TPMS) Warning Light The warning light switches on and a message is displayed to indicate that the tire pressure is lower than the recommended value and/or that slow pressure loss is occurring.
Page 250 248 UNDERSTANDING YOUR INSTRUMENT PANEL Please note that the TPMS is not a substitute for proper tire CAUTION! maintenance, and it is the driver’s responsibility to main- tain correct tire pressure, even if under-inflation has not The TPMS has been optimized for the original equip- reached the level to trigger illumination of the TPMS low ment tires and wheels.
Page 251 UNDERSTANDING YOUR INSTRUMENT PANEL 249 Low Fuel Indicator Light Yellow Telltale What It Means Light Low Fuel Indicator Light When the fuel level reaches approximately 3.0 gal (11.0 L) this light will turn on, and remain on until fuel is added. Anti-Lock Brake (ABS) Indicator Light Yellow Telltale What It Means...
Page 252 250 UNDERSTANDING YOUR INSTRUMENT PANEL Transmission Temperature Indicator Light Yellow Telltale What It Means Light Transmission Temperature Indicator Light This light indicates that the transmission fluid temperature is running hot. This may occur with severe usage, such as trailer towing. If this light turns on, safely pull over and stop the vehicle. Then, shift the transmission into NEUTRAL and run the engine at idle or faster until the light turns off.
Page 253 UNDERSTANDING YOUR INSTRUMENT PANEL 251 Low Coolant Level Indicator Light Yellow Telltale What It Means Light Low Coolant Level Indicator Light This telltale will turn on to indicate the vehicle coolant level is low. Air Suspension Payload Protection Telltale — If Equipped Yellow Telltale What It Means Light...
Page 254 252 UNDERSTANDING YOUR INSTRUMENT PANEL TOW/HAUL Indicator Light Yellow Telltale What It Means Light TOW/HAUL Indicator Light This light will illuminate when TOW HAUL mode is selected. Cargo Light — If Equipped Yellow Tell- What It Means tale Light Cargo Light The cargo light will illuminate when the cargo light is activated by pushing the cargo light button on the headlight switch.
Page 255 UNDERSTANDING YOUR INSTRUMENT PANEL 253 Air Suspension Off-Road 1 Indicator Light — If Equipped Yellow Telltale What It Means Light Air Suspension Off-Road 1 Indicator Light This light will illuminate when the air suspension system is set to the Off-Road 1 setting. For fur- ther information, refer to “Air Suspension System”...
Page 256 254 UNDERSTANDING YOUR INSTRUMENT PANEL Air Suspension Ride Height Lowering Indicator Light— If Equipped Yellow Telltale What It Means Light Air Suspension Ride Height Lowering Indicator Light This light will blink and alert the driver that the vehicle is changing to a lower ride height. Air Suspension Ride Height Lowering Indicator Light—...
Page 257 UNDERSTANDING YOUR INSTRUMENT PANEL 255 4 Low Indicator Light — If Equipped Yellow Telltale What It Means Light 4 Low Indicator Light This light alerts the driver that the vehicle is in the four-wheel drive LOW mode. The front and rear driveshafts are mechanically locked together forcing the front and rear wheels to rotate at the same speed.
Page 258: Green Telltale Indicator Lights
256 UNDERSTANDING YOUR INSTRUMENT PANEL 2WD Indicator Light — If Equipped Yellow Telltale What It Means Light 2WD Indicator Light This light alerts the driver that the vehicle is in the two-wheel drive mode. Green Telltale Indicator Lights Park/Headlight On Indicator Light Green Telltale What It Means Light...
Page 259 UNDERSTANDING YOUR INSTRUMENT PANEL 257 Turn Signal Indicator Lights Green Telltale What It Means Light Turn Signal Indicator Lights The instrument cluster directional arrow will flash independently for the left or right turn signal as selected, as well as the exterior turn signal lamp(s) (front and rear) as selected when the multi- function lever is moved down (left) or up (right).
Page 260: White Telltale Indicator Lights
258 UNDERSTANDING YOUR INSTRUMENT PANEL 4WD AUTO Indicator Light — If Equipped Green Telltale What It Means Light 4WD AUTO Indicator Light This light alerts the driver that the vehicle is in the four-wheel drive auto mode, and the front axle is engaged, but the vehicle’s power is sent to the rear wheels.
Page 261 UNDERSTANDING YOUR INSTRUMENT PANEL 259 Cruise Control SET Indicator Light — If Equipped — Base White Telltale What It Means Light Cruise Control SET Indicator Light This light will turn on when the speed control is set. Refer to “Speed Control” in “Understanding The Features Of Your Vehicle”...
Page 262: Blue Telltale Indicator Lights
260 UNDERSTANDING YOUR INSTRUMENT PANEL Blue Telltale Indicator Lights High Beam Indicator Light Blue Telltale What It Means Light High Beam Indicator Light This indicator shows that the high beam headlights are on. Push the multifunction control lever away from you to switch the headlights to high beam. Pull the lever toward you to switch the headlights back to low beam.
Page 263: Instrument Cluster Display Controls
UNDERSTANDING YOUR INSTRUMENT PANEL 261 Instrument Cluster Display Controls The instrument cluster display features a driver-interactive display that is located in the instrument cluster. Premium Instrument Cluster Display The instrument cluster display menu items may consist of the following: • Speedometer Base Instrument Cluster Display •...
Page 264 262 UNDERSTANDING YOUR INSTRUMENT PANEL • Trailer Tow • Up Arrow Button • Stored Messages Push and release the up arrow button to scroll upward through the main menu items, submenu • Screen Setup screen, and vehicle settings. • Vehicle Settings (Not Equipped with a Uconnect 5.0 & •...
Page 265: Instrument Cluster Display Screens
UNDERSTANDING YOUR INSTRUMENT PANEL 263 Instrument Cluster Display Screens 2. Temperature Display Displays the outside temperature in degrees Celsius or degrees Fahrenheit. 3. Main Screen Displays main menu, submenus, settings. 4. White Telltales 5. Amber Telltales 6. Red Telltales 7. Audio/Phone Information And Submenu Information Base Instrument Cluster Display The instrument cluster display screens are located in the center portion of the cluster and consists of seven sections:...
Page 266 264 UNDERSTANDING YOUR INSTRUMENT PANEL The instrument cluster display screens are located in the 10. Selectable Gauge 1 (Trans Temp, Oil Temp, Oil Life, center portion of the cluster and consists of eight sections: Trailer Brake, Current fuel economy) The instrument cluster display area will normally display 1.
Page 267: Oil Life Reset
UNDERSTANDING YOUR INSTRUMENT PANEL 265 of this message type are “Turn Signal On” (if a turn signal NOTE: Use the steering wheel instrument cluster display is left on) and “Lights On” (if driver leaves the vehicle). controls for the following procedure(s). •...
Page 268: Instrument Cluster Display Selectable Menu Items
266 UNDERSTANDING YOUR INSTRUMENT PANEL 2. Push and release the down arrow button to scroll Vehicle Info downward through the main menu to “Vehicle Info.” Push and release the up or down arrow button until the Vehicle Info menu item is highlighted in the instrument 3.
Page 269 UNDERSTANDING YOUR INSTRUMENT PANEL 267 Fuel Economy Air Suspension — If Equipped Push and release the up or down arrow button until the Push and release the up or down arrow button until the Air Fuel Economy menu item is highlighted in the instrument Suspension menu item is highlighted in the instrument cluster display.
Page 270 268 UNDERSTANDING YOUR INSTRUMENT PANEL Stored Messages Vehicle Settings Menu Item Personal Settings allows the driver to set and recall features Push and release the up or down arrow button when the transmission is in PARK. until the Messages Menu item is highlighted. Push and release the up and down button until Settings This feature shows the number of stored warning displays in the instrument cluster display.
Page 271 UNDERSTANDING YOUR INSTRUMENT PANEL 269 Setting Names Abbre- Setting Names viated (Left Submenu Sub-Menus (Right Submenu Layer) Layer) Language Select Language English, Spanish, French, Italian, German, Dutch, Portu- guese, Arabic (If Equipped) Units Units U.S.; Metric • Notification — Sound Only; Sound & Display ParkSense ParkSense •...
Page 272 270 UNDERSTANDING YOUR INSTRUMENT PANEL Setting Names Abbre- Setting Names viated (Left Submenu Sub-Menus (Right Submenu Layer) Layer) Sound Horn with Re- Horn w/ Rmt Start On; Off mote Start Sound Horn with Re- Horn w/ Rmt Lock Off; 1st Press; 2nd Press mote Lock Remote Unlock Se- Remote Unlock...
Page 273 UNDERSTANDING YOUR INSTRUMENT PANEL 271 Setting Names Abbre- Setting Names viated (Left Submenu Sub-Menus (Right Submenu Layer) Layer) Mode Tire/Jack Mode Tire/Jack Mode On; Off Transport Mode Transport Mode On; Off Wheel Alignment Wheel Alignment On; Off Mode Horn w/ Remote Horn w/ Rmt Lwr On;...
Page 274 272 UNDERSTANDING YOUR INSTRUMENT PANEL Setting Names Abbre- Setting Names viated (Left Submenu Sub-Menus (Right Submenu Layer) Layer) • Trailer # (# is equal to slot position) Trailer Name Trailer Name • Boat • Car • Cargo • Dump • Equipment •...
Page 275: Instrument Cluster Display Messages
UNDERSTANDING YOUR INSTRUMENT PANEL 273 Setting Names Abbre- Setting Names viated (Left Submenu Sub-Menus (Right Submenu Layer) Layer) Park Assist Rear Park Assist Rear Chime On; Off Chime Volume Volume • Fuel Low Turn Menu OFF — If Equipped • Service Antilock Brake System Push and release the right arrow button to exit the main menu.
Page 276 274 UNDERSTANDING YOUR INSTRUMENT PANEL • Engine Temperature Hot • Remote Start Aborted Time Expired • Battery Voltage Low • Remote Start Disabled Start To Reset • Service Electronic Throttle Control • Service Airbag System • Lights On • Service Airbag Warning Light •...
Page 277: Battery Saver On/Battery Saver Mode Message - Electrical Load Reduction Actions - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 275 • Service Transmission • Reduce Speed To Maintain Selected Ride Height • Service Shifter • Air Suspension System Cooling Down Please Wait • Engage Park Brake To Prevent Rolling • Vehicle Cannot Be Lowered Door Open •...
Page 278 276 UNDERSTANDING YOUR INSTRUMENT PANEL • Heated/Cooled Cup Holders — If Equipped Load reduction is only active when the engine is running. It will display a message if there is a risk of battery • Rear Defroster And Heated Mirrors depletion to the point where the vehicle may stall due to •...
Page 279: Cybersecurity
UNDERSTANDING YOUR INSTRUMENT PANEL 277 • The vehicle was parked for an extended period of time After a trip: (weeks, months). • Check if any aftermarket equipment was installed (ad- • The battery was recently replaced and was not charged ditional lights, upfitter electrical accessories, audio sys- tems, alarms) and review specifications if any (load and completely.
Page 280 278 UNDERSTANDING YOUR INSTRUMENT PANEL and takes appropriate steps as needed. Similar to a com- WARNING! (Continued) puter or other devices, your vehicle may require software • As always, if you experience unusual vehicle behav- updates to improve the usability and performance of your ior, take your vehicle to your nearest authorized systems or to reduce the potential risk of unauthorized and dealer immediately.
Page 281: Uconnect Settings
UNDERSTANDING YOUR INSTRUMENT PANEL 279 Owner’s Manual Supplement and “Onboard Diagnostic System (OBD II) Cybersecurity” in “Maintaining Your Vehicle”. UCONNECT SETTINGS The Uconnect system uses a combination of buttons on the touchscreen and buttons on the faceplate located on the center of the instrument panel that allows you to access and change the customer programmable features.
Page 282: Buttons On The Faceplate
280 UNDERSTANDING YOUR INSTRUMENT PANEL change settings (i.e., 30, 60, 90), push the center of the control knob one or more times to select or change a setting (i.e., ON, OFF). Your Uconnect system may also have Screen Off and Back buttons located below the Uconnect system.
Page 283 UNDERSTANDING YOUR INSTRUMENT PANEL 281 Options, Suspension, Trailer Brake, Audio, Compass Set- previous menu. Pressing the Up or Down Arrow buttons tings, Phone/Bluetooth, SiriusXM Setup (if equipped), on the touchscreen on the right side of the screen will allow Restore Settings, Clear Personal Data and System Informa- you to toggle up or down through the list of available tion.
Page 284 282 UNDERSTANDING YOUR INSTRUMENT PANEL Units — If Equipped After pressing “Units” on the touchscreen, the following will be available: Setting Name Selectable Options Metric Units Voice After pressing the “Voice” button on the touchscreen, the following settings will be available: Setting Name Selectable Options Voice Response Length...
Page 285 UNDERSTANDING YOUR INSTRUMENT PANEL 283 Setting Name Selectable Options Set Date Up Arrow Down Arrow Safety/Assistance After pressing the “Safety/Assistance” button on the touchscreen, the following settings will be available: Setting Name Selectable Options ParkSense — If Equipped Sound Only Sounds and Display NOTE: The ParkSense system will scan for objects behind the vehicle when the transmission gear selector is in REVERSE and...
Page 286 284 UNDERSTANDING YOUR INSTRUMENT PANEL ParkView Backup Camera Active Guidelines NOTE: Your vehicle may be equipped with the ParkView Rear Back Up Camera Active Guidelines that allows you to see ac- tive guidelines over the ParkView Back up camera display whenever the gear selector is put into REVERSE. The im- age will be displayed on the radio touchscreen display along with a caution note to “check entire surroundings”...
Page 287 UNDERSTANDING YOUR INSTRUMENT PANEL 285 Hill Start Assist — If Equipped NOTE: When the “Hill Start Assist” feature is selected, the Hill Start Assist (HSA) system becomes active. Lights After pressing the “Lights” button on the touchscreen, the following settings will be available: Setting Name Selectable Options Headlight Off Delay...
Page 288 286 UNDERSTANDING YOUR INSTRUMENT PANEL Setting Name Selectable Options Headlights With Wipers — If Equipped Auto Dim High Beams — If Equipped Flash Lights With Lock NOTE: When the “Flash Lights With Lock” feature is selected, the exterior lights will flash when the doors are locked or un- locked with the key fob.
Page 289 UNDERSTANDING YOUR INSTRUMENT PANEL 287 Setting Name Selectable Options Auto Unlock On Exit NOTE: When the “Auto Unlock On Exit” feature is selected, all doors will unlock when the vehicle is stopped, the transmis- sion is in the PARK or NEUTRAL position and the driver’s door is opened. Sound Horn With Lock 1st Press 2nd Press...
Page 290 288 UNDERSTANDING YOUR INSTRUMENT PANEL Setting Name Selectable Options • The seat will return to the memorized seat location if “Memory Linked To Fob” is set to (On) when the key fob is used to unlock the door. Passive Entry — If Equipped NOTE: The “Passive Entry”...
Page 291 UNDERSTANDING YOUR INSTRUMENT PANEL 289 Setting Name Selectable Options NOTE: When the “Auto-On Driver Heated/Ventilated Seat & Steering Wheel With Vehicle Start” feature is selected the driv- er’s heated seat and heated steering wheel will automatically turn on when temperatures are below 40° F (4.4° C). When temperatures are above 80°...
Page 292 290 UNDERSTANDING YOUR INSTRUMENT PANEL Suspension — If Equipped After pressing the “Suspension” button on the touchscreen, the following settings will be available: Setting Name Selectable Options Sound Horn With Lower Flash Lights With Lower Auto Entry/Exit Suspension NOTE: When the “Auto Entry/Exit Suspension” feature is selected, the vehicle automatically lowers from ride height posi- tion when vehicle shifted to park for easy entry/exit.
Page 293 UNDERSTANDING YOUR INSTRUMENT PANEL 291 Setting Name Selectable Options Transport Mode NOTE: When the “Transport Mode” feature is selected, the air suspension system is disabled to assist with flat bed towing. Wheel Alignment Mode NOTE: The “Wheel Alignment Mode” feature prevents auto leveling of the air suspension while performing a wheel align- ment service.
Page 294 292 UNDERSTANDING YOUR INSTRUMENT PANEL Audio After pressing the “Audio” button on the touchscreen, the following settings will be available: Setting Name Selectable Options Balance/Fade Speaker Icon (Arrow Buttons) NOTE: The “Balance/Fade” feature allows you to adjust the Balance and Fade settings. Press and drag the speaker icon or use the arrows to adjust, tap the “C”...
Page 295 UNDERSTANDING YOUR INSTRUMENT PANEL 293 Setting Name Selectable Options AUX Volume Offset — If Equipped NOTE: The “AUX Volume Offset” feature provides the ability to tune the audio level for portable devices connected through the AUX input. Loudness — If Equipped NOTE: The “Loudness”...
Page 296 294 UNDERSTANDING YOUR INSTRUMENT PANEL Setting Name Selectable Options • Keep magnetic materials away from the top of the instrument panel, such as iPod’s, Mobile Phones, Laptops and Radar Detectors. This is where the compass module is located, and it can cause interference with the compass sen- sor, and it may give false readings.
Page 297 UNDERSTANDING YOUR INSTRUMENT PANEL 295 Setting Name Selectable Options Paired Phones List of Paired Phones NOTE: The “Paired Phones” feature shows which phones are paired to the Phone/Bluetooth system. For further information, refer to the Uconnect Owner’s Manual Supplement. SiriusXM Setup — If Equipped After pressing the “SiriusXM Setup”...
Page 298 296 UNDERSTANDING YOUR INSTRUMENT PANEL Setting Name Selectable Options 1. Press the “Subscription Info” button on the touchscreen to access the Subscription Information screen. 2. Write down the SIRIUS ID numbers for your receiver. To reactivate your service, either call the number listed on the screen or visit the provider online.
Page 299: Customer Programmable Features - Uconnect 8.4/8.4 Nav Personal Settings
UNDERSTANDING YOUR INSTRUMENT PANEL 297 Setting Name Selectable Options Clear Personal Data Cancel NOTE: When this feature is selected it will remove all personal data including Bluetooth devices and presets. If “Yes” is se- lected a pop-up will appear asking Are you sure you want to clear all personal data?” select “Yes” to Clear, or “Can- cel”...
Page 300 298 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Only one category may be selected at a time. buttons on the touchscreen on the right side of the screen will allow you to toggle up or down through the list of When making a selection, press the button on the touch- available settings.
Page 301 UNDERSTANDING YOUR INSTRUMENT PANEL 299 Setting Name Selectable Options Display Brightness With – Headlights OFF NOTE: To make changes to the Display Brightness with Headlights OFF setting, the headlights must be off and the interior dimmer switch must not be in the party or parade positions. Pre-configured Themes Set Theme English, Français, Español...
Page 302 300 UNDERSTANDING YOUR INSTRUMENT PANEL Units — If Equipped After pressing “Units” on the touchscreen, the following will be available: Setting Name Selectable Options Units Metric Voice After pressing the “Voice” button on the touchscreen, the following settings will be available: Setting Name Selectable Options Voice Response Length...
Page 303 UNDERSTANDING YOUR INSTRUMENT PANEL 301 Setting Name Selectable Options Set Time Minutes – Time Format 12hrs 24hrs Show Time In Status Bar — If Equipped NOTE: The “Show Time In Status Bar” feature will allow you to turn on or shut off the digital clock in the status bar. Safety &...
Page 304 302 UNDERSTANDING YOUR INSTRUMENT PANEL Setting Name Selectable Options Front ParkSense Chime High Volume Rear ParkSense Chime High Volume Tilt Side Mirrors In Re- verse — If Equipped NOTE: When the “Tilt Side Mirrors In Reverse” feature is selected, the outside side-view mirrors will tilt downward when the ignition is in the RUN position and the transmission gear selector is in the REVERSE position.
Page 305 UNDERSTANDING YOUR INSTRUMENT PANEL 303 Setting Name Selectable Options ParkView Backup Camera Active Guidelines NOTE: Your vehicle may be equipped with the ParkView Rear Back Up Camera Active Guidelines that allows you to see Ac- tive (Dynamic) Guidelines which deflect with steering wheel angle over the ParkView Back up Camera display when- ever the gear selector is put into REVERSE.
Page 306 304 UNDERSTANDING YOUR INSTRUMENT PANEL Setting Name Selectable Options Hill Start Assist — If Equipped Setting Name Selectable Options Two Or Four Corner Air Tire Jack Mode Transport Mode Wheel Alignment Protection Mode Mode Suspension Modes — If Equipped NOTE: There are four air suspension modes designed to protect the system in unique situations.
Page 307 UNDERSTANDING YOUR INSTRUMENT PANEL 305 Setting Name Selectable Options Headlight Illumination On Ap- – proach NOTE: When the “Headlight Illumination On Approach” feature is selected, the headlights will activate and remain on for 0, 30, 60, or 90 seconds when the doors are unlocked with the key fob. Headlights With Wipers —...
Page 308 306 UNDERSTANDING YOUR INSTRUMENT PANEL Doors & Locks After pressing the “Doors & Locks” button on the touch- screen, the following settings will be available: Setting Name Selectable Options Auto Door Locks NOTE: When the “Auto Door Locks” feature is selected, all doors will lock automatically when the vehicle reaches a speed of 15 mph (24 km/h).
Page 309 UNDERSTANDING YOUR INSTRUMENT PANEL 307 Setting Name Selectable Options Sound Horn With Lock 1st Press 2nd Press Sound Horn With Remote Start 1st Press Of Key Fob Un- Driver Door All Doors locks NOTE: • When “1st Press Of Key Fob Unlocks: Driver Door” is selected, only the driver’s door will unlock on the first press of the key fob unlock button.
Page 310 308 UNDERSTANDING YOUR INSTRUMENT PANEL Setting Name Selectable Options Personal Settings Linked To Key Fob — If Equipped NOTE: • The “Personal Settings Linked To Key Fob” feature provides automatic driver seat positioning to enhance driver mobility when entering and exiting the vehicle. •...
Page 311 UNDERSTANDING YOUR INSTRUMENT PANEL 309 Engine Off Options After pressing the “Engine Off Options” button on the touchscreen, the following settings will be available: Setting Name Selectable Options Easy Exit Seat — If Equipped NOTE: When the “Easy Exit Seat” feature is selected, the Driver’s seat will automatically move rearward once the engine is shut off.
Page 312 310 UNDERSTANDING YOUR INSTRUMENT PANEL Air Suspension — If Equipped After pressing the “Suspension” button on the touchscreen, the following settings will be available: Setting Name Selectable Options Sound Horn With Lower NOTE: When the “Sound Horn With Lower” feature is selected, a short horn sound will occur when the key fob remote lower button is pressed.
Page 313 UNDERSTANDING YOUR INSTRUMENT PANEL 311 Setting Name Selectable Options Tire Jack Mode NOTE: When the “Tire Jack Mode” feature is selected, the air suspension system is disabled to assist with changing a spare tire. Transport Mode NOTE: When the “Transport Mode” feature is selected, the air suspension system lowers and then disables to assist with flat bed towing.
Page 314 312 UNDERSTANDING YOUR INSTRUMENT PANEL Trailer Brake After pressing the “Trailer Brake” button on the touch- screen, the following settings will be available: Setting Name Selectable Options Trailer Select Trailer 1 Trailer 2 Trailer 3 Trailer 4 Trailer Brake Type Light Electric Heavy Electric Light EOH...
Page 315 UNDERSTANDING YOUR INSTRUMENT PANEL 313 Setting Name Selectable Options Speed Adjusted Vol- NOTE: The “Speed Adjusted Volume” feature increases or decreases volume relative to vehicle speed. Surround Sound — If Equipped NOTE: The “Surround Sound” feature provides simulated surround sound mode. AUX Volume Offset —...
Page 316 314 UNDERSTANDING YOUR INSTRUMENT PANEL Phone Settings After pressing the “Phone Settings” button on the touch- screen, the following settings will be available: Setting Name Selectable Options Do Not Disturb List of Settings NOTE: Press “Do Not Disturb” to access the available settings. The following settings are: Auto Reply (both, text, call), Auto Reply Message (custom, default) and Custom Auto Reply Message (create message).
Page 317 UNDERSTANDING YOUR INSTRUMENT PANEL 315 Setting Name Selectable Options NOTE: The “Tune Start” feature begins playing the current song from the beginning when you tune to a music channel using one of the twelve presets, so you can enjoy the complete song. This feature occurs the first time the preset is selected during that current song.
Page 318 316 UNDERSTANDING YOUR INSTRUMENT PANEL Restore Settings After pressing the “Restore Settings” button on the touch- screen, the following settings will be available: Setting Name Selectable Options Restore Settings Cancel NOTE: When the “Restore Settings” feature is selected it will reset all settings to their default settings. Clear Personal Data After pressing the “Clear Personal Data”...
Page 319: Uconnect Radios
UNDERSTANDING YOUR INSTRUMENT PANEL 317 Setting Name Selectable Options System Information System Software Information Screen NOTE: When the “System Information” feature is selected, a “System Software Information” screen will appear, displaying the system software version. UCONNECT RADIOS For detailed information about your Radio 3.0, Uconnect 3.0, Uconnect 5.0, or Uconnect 8.4/8.4 NAV radio, refer to your Uconnect Owner’s Manual Supplement.
Page 320: Steering Wheel Audio Controls - If Equipped
318 UNDERSTANDING YOUR INSTRUMENT PANEL STEERING WHEEL AUDIO CONTROLS — IF The button located in the center of the right hand control will switch modes to Radio, CD or other valid audio EQUIPPED sources. The remote sound system controls are located on the back surface of the steering wheel.
Page 321: Cd/Dvd Disc Maintenance
UNDERSTANDING YOUR INSTRUMENT PANEL 319 If you push the switch up or down twice, it plays the NOTE: If you experience difficulty in playing a particular second track. If you push the switch up or down three disc, it may be damaged (e.g., scratched, reflective coating times, it will play the third, etc.
Page 322 320 UNDERSTANDING YOUR INSTRUMENT PANEL The internal wireless radio operates within guidelines NOTE: found in radio frequency safety standards and recommen- • This equipment has been tested and found to comply dations, which reflect the consensus of the scientific com- with the limits for a Class B digital device, pursuant to munity.
Page 323: Climate Controls
UNDERSTANDING YOUR INSTRUMENT PANEL 321 CLIMATE CONTROLS Manual Climate Controls Without A Touchscreen — If Equipped The Climate Control System allows you to regulate the temperature, airflow, and direction of air circulating The controls for the manual heating and air conditioning throughout the vehicle.
Page 324 322 UNDERSTANDING YOUR INSTRUMENT PANEL Manual Climate Control Descriptions Icon Description MAX A/C Setting Rotate the Temperature Control Knob counterclockwise until it is set to MAX A/C. This is the coldest setting and will put the A/C to its maximum power. A/C Button Push the A/C button to engage the Air Conditioning (A/C).
Page 325 UNDERSTANDING YOUR INSTRUMENT PANEL 323 Icon Description Front Defrost Setting Turn the Mode Control knob to the Defrost mode. Air comes from the windshield and side win- dow demist outlets. When the defrost setting is selected, the blower level will increase. Use De- frost mode with maximum temperature settings for best windshield and side window defrosting and defogging.
Page 326 324 UNDERSTANDING YOUR INSTRUMENT PANEL Icon Description Modes Control: Rotate the Mode Control Knob to change the airflow distribution mode. The airflow distribution mode can be adjusted so air comes from the instrument panel outlets, floor outlets, defrost outlets and demist outlets. The Mode settings are as follows: Panel Mode Panel Mode...
Page 327 UNDERSTANDING YOUR INSTRUMENT PANEL 325 Economy Mode CAUTION! If ECONOMY mode is desired, push the A/C button to Failure to follow these cautions can cause damage to turn off the LED indicator and the A/C compressor. Rotate the heating elements: the temperature control knob to the desired temperature.
Page 328: Climate Controls With A Touchscreen
326 UNDERSTANDING YOUR INSTRUMENT PANEL Climate Controls With a Touchscreen 5.0 With Automatic Temperature Controls...
Page 329 UNDERSTANDING YOUR INSTRUMENT PANEL 327 8.4/8.4 NAV With Manual Temperature Controls...
Page 330 328 UNDERSTANDING YOUR INSTRUMENT PANEL 8.4/8.4 NAV With Automatic Temperature Controls...
Page 331 UNDERSTANDING YOUR INSTRUMENT PANEL 329 Control Descriptions NOTE: Icons and descriptions can vary based upon vehicle equipment. Icon Description MAX A/C Button Press and release to change the current setting, the indicator illuminates when MAX A/C is on. Performing this function again will cause the MAX A/C operation to switch into manual mode and the MAX A/C indicator will turn off.
Page 332 330 UNDERSTANDING YOUR INSTRUMENT PANEL Icon Description AUTO Button — If Equipped Automatically controls the interior cabin temperature by adjusting airflow distribution and amount. Toggling this function will cause the system to switch between manual mode and auto- matic modes. Refer to “Automatic Operation” for more information. Front Defrost Button Press and release the touchscreen button, or push and release the button on the faceplate, to change the current airflow setting to Defrost mode.
Page 333 UNDERSTANDING YOUR INSTRUMENT PANEL 331 Icon Description Uconnect 5.0 Driver and Passenger Temperature Up and Down Buttons — If Equipped Provides the driver and passenger with independent temperature control. Push the up arrow button on the faceplate, press the up arrow button on the touchscreen, or press and slide the temperature bar towards the red arrow button on the touchscreen for warmer temperature set- tings.
Page 334 332 UNDERSTANDING YOUR INSTRUMENT PANEL Icon Description Faceplate Knob Blower Control Blower Control is used to regulate the amount of air forced through the climate system. There are seven blower speeds available. The speeds can be selected using either the blower control knob on the faceplate or the buttons on the touchscreen.
Page 335 UNDERSTANDING YOUR INSTRUMENT PANEL 333 Icon Description Floor Mode Floor Mode Air comes from the floor outlets. A slight amount of air is directed through the defrost and side window demister outlets. Mix Mode Mix Mode Air is directed through the floor, defrost, and side window demister outlets. This setting works best in cold or snowy conditions that require extra heat to the windshield.
Page 336 334 UNDERSTANDING YOUR INSTRUMENT PANEL Climate Control Functions MAX A/C A/C (Air Conditioning) MAX A/C sets the control for maximum cooling perfor- mance. The Air Conditioning (A/C) button allows the operator to manually activate or deactivate the air conditioning sys- Press and release to toggle between MAX A/C and the tem.
Page 337: Automatic Temperature Control (Atc) - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 335 NOTE: In cold weather, use of recirculation mode may lead 3. When the system is set up for your comfort level, it is to excessive window fogging. The recirculation feature not necessary to change the settings. You will experience may be unavailable (button on the touchscreen greyed out) the greatest efficiency by simply allowing the system to if conditions exist that could create fogging on the inside of...
Page 338: Operating Tips
336 UNDERSTANDING YOUR INSTRUMENT PANEL Manual Operation Override Winter Operation This system offers a full complement of manual override To ensure the best possible heater and defroster perfor- features. The AUTO symbol in the front ATC display will mance, make sure the engine cooling system is functioning be turned off when the system is being used in the manual properly and the proper amount, type, and concentration mode.
Page 339 UNDERSTANDING YOUR INSTRUMENT PANEL 337 Window Fogging collected in the air intake may reduce airflow, can cause odor, and if they enter the plenum they could plug the Vehicle windows tend to fog on the inside of the glass in water drains.
Page 340 338 UNDERSTANDING YOUR INSTRUMENT PANEL Control Setting Suggestions For Various Weather Conditions Control Settings Suggestions For Various Weather Conditions Chart...
Page 341: Personalized Menu Bar
UNDERSTANDING YOUR INSTRUMENT PANEL 339 PERSONALIZED MENU BAR The new app shortcut, that was dragged down onto the main menu bar, will now be an active App/shortcut. The Uconnect features and services in the main menu bar are easily changed for your convenience. Simply follow NOTE: This feature is only available if the vehicle is in these steps: PARK.
Page 342 340 UNDERSTANDING YOUR INSTRUMENT PANEL Uconnect 5.0 Uconnect 8.4 NAV If you see the icon on your touchscreen, you have the Uconnect 8.4 NAV system. If not, you have a Uconnect 8.4 system.
Page 343: Get Started
UNDERSTANDING YOUR INSTRUMENT PANEL 341 Get Started 1. Visit UconnectPhone.com to check mobile device and feature compatibility and to find phone pairing instruc- tions. 2. Reduce background noise. Wind and passenger conver- sations are examples of noise that may impact recogni- tion.
Page 344: Basic Voice Commands
342 UNDERSTANDING YOUR INSTRUMENT PANEL Basic Voice Commands The basic Voice Commands below can be given at any point while using your Uconnect system. Push the VR button . After the beep, say • Cancel to stop a current voice session •...
Page 345: Radio
UNDERSTANDING YOUR INSTRUMENT PANEL 343 TIP: At any time, if you are not sure of what to say or want to learn a Voice Command, press the VR button and say “Help.” The system will provide you with a list of commands.
Page 346: Media
344 UNDERSTANDING YOUR INSTRUMENT PANEL Uconnect 5.0 Radio Uconnect 8.4/8.4 NAV Radio Media Uconnect offers connections via USB, Bluetooth and auxil- iary ports (If Equipped). Voice operation is only available for connected USB and iPod devices. (Remote CD player optional and not available on all vehicles.) Push the VR button .
Page 347 UNDERSTANDING YOUR INSTRUMENT PANEL 345 • Change source to Bluetooth • Change source to iPod • Change source to USB • Play artist Beethoven; Play album Greatest Hits; Play song Moonlight Sonata; Play genre Classical TIP: For the Uconnect 3.0, Uconnect 5.0 and 8.4/8.4 NAV systems, select Browse to see all of the music on your iPod or USB device.
Page 348: Phone
346 UNDERSTANDING YOUR INSTRUMENT PANEL Uconnect 5.0 Media Uconnect 8.4/8.4 NAV Media Phone Making and answering hands-free phone calls is easy with Uconnect. When the Phonebook button is illuminated for the Uconnect 3.0, Uconnect 5.0 and 8.4/8.4 NAV radios, your system is ready. Check UconnectPhone.com for mo- bile phone compatibility and pairing instructions.
Page 349 UNDERSTANDING YOUR INSTRUMENT PANEL 347 • Call John Smith • Dial 123-456-7890 and follow the system prompts • Redial (call previous outgoing phone number) • Call back (call previous incoming phone number) TIP: When providing a Voice Command, push the Phone button and say “Call,”...
Page 350: Voice Text Reply
348 UNDERSTANDING YOUR INSTRUMENT PANEL 2. Listen to the Uconnect prompts. After the beep, repeat one of the pre-defined messages and follow the system prompts. PRE-DEFINED VOICE TEXT REPLY RESPONSES Yes. Stuck in traffic. See you later. Start without I’ll be late. Okay.
Page 351: Climate (8.4/8.4 Nav)
UNDERSTANDING YOUR INSTRUMENT PANEL 349 Apple iPhone iOS 6 or later supports reading incoming TIP: Voice Text Reply is not compatible with iPhone, but if text messages only. To enable this feature on your Apple your vehicle is equipped with Siri Eyes Free, you can use iPhone, follow these 4 simple steps: your voice to send a text message.
Page 352: Navigation (8.4 /8.4 Nav)
350 UNDERSTANDING YOUR INSTRUMENT PANEL TIP: Voice Command for Climate may only be used to get to where you want to go. (Navigation is optional on the adjust the interior temperature of your vehicle. Voice Uconnect 8.4 system. See your dealer to activate navigation command will not work to adjust the heated seat, vented at any time.) seat, or the steering wheel, if equipped.
Page 353: Uconnect Access (8.4/8.4 Nav)
UNDERSTANDING YOUR INSTRUMENT PANEL 351 NOTE: Your vehicle may be transmitting data as autho- rized by the subscriber. An included trial and/or subscription is required to take advantage of the Uconnect Access services in the next section of this guide. To register with Uconnect Access, press the Apps button on the 8.4-inch touchscreen to get started.
Page 354: Vehicle Health Alert
352 UNDERSTANDING YOUR INSTRUMENT PANEL Voice Texting Roadside Assistance Call 3G Wi-Fi Hotspot*** **If vehicle is equipped. ***Extra charges apply. Vehicle Health Alert Your vehicle will send you an email alert if it senses a problem under the hood with one of your vehicles key systems.
Page 355: Mobile App (8.4/8.4 Nav)
UNDERSTANDING YOUR INSTRUMENT PANEL 353 • Once on the “Remote” screen, you can begin using Mobile App (8.4/8.4 NAV) Remote Door Lock/Unlock, Remote Vehicle Start, and You’re only a few steps away from using remote com- activate your horn and lights remotely, if equipped. mands and sending a destination from your phone to your •...
Page 356: Yelp (8.4/8.4 Nav)
354 UNDERSTANDING YOUR INSTRUMENT PANEL You must be registered with Uconnect Access and have a TIP: compatible MAP – enabled smartphone to use your voice • Voice Texting is not compatible with iPhone, but if your to send a personalized text message. For details about vehicle is equipped with Siri Eyes Free, you can use your MAP, visit UconnectPhone.com.
Page 357: Siriusxm Travel Link (8.4/8.4 Nav)
UNDERSTANDING YOUR INSTRUMENT PANEL 355 Push the VR button . After the beep, say one of the following commands: • Show fuel prices • Show 5 - day weather forecast • Show extended weather TIP: Traffic alerts are not accessible with Voice Command. Yelp SiriusXM Travel Link (8.4/8.4 NAV) Need to find a gas station, view local movie listings, check...
Page 358: Siri Eyes Free - If Equipped
356 UNDERSTANDING YOUR INSTRUMENT PANEL Siri Eyes Free — If Equipped Siri lets you use your voice to send text messages, select media, place phone calls and much more. Siri uses your natural language to understand what you mean and will respond back to confirm your requests.
Page 359 UNDERSTANDING YOUR INSTRUMENT PANEL 357 Siri Enable Screens Voice Recognition (VR)/Phone Buttons 1 — Select Settings On Your 3 — Select Siri iPhone 4 — Enable Siri 1 — Push To Begin Radio, Media, Navigation, Apps And Climate 2 — Select General Functions 2 —...
Page 360 358 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: A push and release of the button will start normal embedded VR functions. The push and hold, then release of the button will start Siri functions. 2. After the double beep, begin speaking to Siri. Examples of Siri commands and questions: •...
Page 361: Do Not Disturb
UNDERSTANDING YOUR INSTRUMENT PANEL 359 Do Not Disturb NOTE: • Reply with text message is not compatible with iPhones. With Do Not Disturb, you can disable notifications from incoming calls and texts, allowing you to keep your eyes • Auto reply with text message is only available on on the road and hands on the wheel.
Page 362: Additional Information
360 UNDERSTANDING YOUR INSTRUMENT PANEL Additional Information © 2016 FCA US LLC. All rights reserved. Mopar and Uconnect are registered trademarks and Mopar Owner Connect is a trademark of FCA US LLC. Android is a trademark of Google Inc. SiriusXM and all related marks and logos are trademarks of SiriusXM Radio Inc.
Page 363 STARTING AND OPERATING CONTENTS ▫ Six-Speed Automatic Transmission — 1500 Models STARTING PROCEDURES ....367 Only (If Equipped) .....380 ▫...
Page 364 362 STARTING AND OPERATING AIR SUSPENSION SYSTEM (1500 MODELS) — IF AXLE LOCKER SYSTEM — POWER WAGON EQUIPPED ......422 MODELS ONLY (IF EQUIPPED).
Page 365 STARTING AND OPERATING 363 ▫ Traction......455 PARKING BRAKE ..... . .477 DRIVING THROUGH WATER .
Page 366 364 STARTING AND OPERATING ▫ Tire Markings ......492 TIRE ROTATION RECOMMENDATIONS ..513 ▫...
Page 367 STARTING AND OPERATING 365 ▫ Gasoline/Oxygenate Blends ....524 ADDING FUEL ......529 ▫...
Page 368 366 STARTING AND OPERATING ▫ Towing This Vehicle Behind Another Vehicle..553 ▫ Recreational Towing — Four-Wheel Drive Models ......555 ▫...
Page 369: Starting Procedures
STARTING AND OPERATING 367 STARTING PROCEDURES WARNING! (Continued) Before starting your vehicle, adjust your seat, adjust both • Do not leave children or animals inside parked inside and outside mirrors, and fasten your seat belt. vehicles in hot weather. Interior heat build-up may cause serious injury or death.
Page 370: Keyless Enter-N-Go - Ignition
368 STARTING AND OPERATING NOTE: Normal Starting • This vehicle is equipped with a transmission shift inter- To Turn On The Engine Using The ENGINE locking system. The brake pedal must be pressed to shift START/STOP Button out of PARK. 1.
Page 371: Extreme Cold Weather (Below -22°F Or −30°C)
STARTING AND OPERATING 369 3. If the gear selector is not in PARK, the ENGINE START/ NOTE: The idle shut down timer is disabled while the PTO STOP button must be held for two seconds or three short is active. pushes in a row with the vehicle speed above 5 mph ENGINE START/STOP Button Functions —...
Page 372: If Engine Fails To Start
370 STARTING AND OPERATING If Engine Fails To Start WARNING! (Continued) If the engine fails to start after you have followed the • Do not attempt to push or tow your vehicle to get it “Normal Starting” procedure, it may be flooded. Push the started.
Page 373: After Starting
STARTING AND OPERATING 371 After Starting The engine block heater must be plugged in at least one hour to have an adequate warming effect on the engine. The idle speed is controlled automatically, and it will decrease as the engine warms up. WARNING! ENGINE BLOCK HEATER —...
Page 374 372 STARTING AND OPERATING WARNING! WARNING! (Continued) • Never use the PARK position as a substitute for the • It is dangerous to shift out of PARK or NEUTRAL if parking brake. Always apply the parking brake fully the engine speed is higher than idle speed. If your when exiting the vehicle to guard against vehicle foot is not firmly pressing the brake pedal, the movement and possible injury or damage.
Page 375: Key Ignition Park Interlock
STARTING AND OPERATING 373 Key Ignition Park Interlock Eight-Speed Automatic Transmission — If Equipped This vehicle is equipped with a Key Ignition Park Interlock which requires the transmission to be in PARK before the The transmission is controlled using a rotary electronic ignition can be turned to the LOCK/OFF (key removal) gear selector located on the instrument panel.
Page 376 374 STARTING AND OPERATING The transmission gear selector has only PARK, REVERSE, Gear Ranges NEUTRAL, and DRIVE positions. Manual downshifts can DO NOT race the engine when shifting from PARK or be made using the Electronic Range Select (ERS) shift NEUTRAL into another gear range.
Page 377 STARTING AND OPERATING 375 When exiting the vehicle, always: WARNING! (Continued) • Apply the parking brake. engine is idling normally and your foot is firmly • Shift the transmission into PARK. pressing the brake pedal. • Unintended movement of a vehicle could injure •...
Page 378 376 STARTING AND OPERATING • With brake pedal released, verify that the gear selector WARNING! (Continued) will not move out of PARK. touch the parking brake, brake pedal or the trans- REVERSE (R) mission gear selector. • Do not leave the key fob in or near the vehicle (or in This range is for moving the vehicle backward.
Page 379 STARTING AND OPERATING 377 these conditions, using a lower gear range will improve CAUTION! performance and extend transmission life by reducing excessive shifting and heat buildup. Towing the vehicle, coasting, or driving for any other reason with the transmission in NEUTRAL can cause During extremely cold temperatures (-22°F [-30°C] or be- severe transmission damage.
Page 380 378 STARTING AND OPERATING In the event of a momentary problem, the transmission can NOTE: Even if the transmission can be reset, we recom- be reset to regain all forward gears by performing the mend that you visit your authorized dealer at your earliest following steps: possible convenience.
Page 381 STARTING AND OPERATING 379 When to Use TOW/HAUL Mode When driving in hilly areas, towing a trailer, carrying a heavy load, etc., and frequent transmission shifting occurs, push the TOW/HAUL switch to activate TOW/HAUL mode. This will improve performance and reduce the potential for transmission overheating or failure due to excessive shifting.
Page 382: Six-Speed Automatic Transmission - 1500 Models Only (If Equipped)
380 STARTING AND OPERATING The “TOW/HAUL Indicator Light” will illuminate in the position. Pull the gear selector toward you when shifting instrument cluster to indicate that TOW/HAUL mode has into REVERSE or PARK, or when shifting out of PARK been activated. Pushing the switch a second time restores (column shift only).
Page 383 STARTING AND OPERATING 381 Gear Ranges NOTE: On four-wheel drive vehicles be sure that the transfer case is in a drive position. DO NOT race the engine when shifting from PARK or NEUTRAL into another gear range. When exiting the vehicle, always: •...
Page 384 382 STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) vehicle could accelerate quickly forward or in re- of reasons. A child or others could be seriously or verse. You could lose control of the vehicle and hit fatally injured. Children should be warned not to someone or something.
Page 385 STARTING AND OPERATING 383 The following indicators should be used to ensure that you started in this range. Apply the parking brake and shift the have engaged the transmission into the PARK position: transmission into PARK if you must leave the vehicle. •...
Page 386 384 STARTING AND OPERATING DRIVE (D) If the transmission temperature exceeds normal operating limits, the powertrain controller will modify the transmis- This range should be used for most city and highway sion shift schedule and expand the range of torque con- driving.
Page 387 STARTING AND OPERATING 385 transmission fluid is warm (refer to the “Note” under 4. Wait approximately 10 seconds. “Torque Converter Clutch” in this section). During ex- 5. Restart the engine. tremely cold temperatures (-16°F [-27°C] or below), opera- tion may briefly be limited to first and direct gears only. 6.
Page 388 386 STARTING AND OPERATING Use of ERS (or TOW/HAUL mode) also enables an addi- tional underdrive gear which is not normally used during through-gear accelerations. This additional gear can im- prove vehicle performance and cooling capability when towing a trailer on certain grades. In ERS mode, gears 1 though 3 are underdrive gears, and ERS 4 is direct drive.
Page 389 STARTING AND OPERATING 387 NOTE: To select the proper gear position for maximum deceleration (engine braking), simply press and hold the gear selector to the left (-) (console shift) or the ERS (-) switch down (column shift). The transmission will shift to the range from which the vehicle can best be slowed down.
Page 390 388 STARTING AND OPERATING • The engine coolant (antifreeze) has reached an adequate temperature, • Vehicle speed is sufficiently high, • The TOW/HAUL switch has not been activated, and • The driver is not heavily pressing the accelerator. When To Use TOW/HAUL Mode When driving in hilly areas, towing a trailer, carrying a heavy load, etc., and frequent transmission shifting occurs, push the TOW/HAUL switch to activate TOW/HAUL...
Page 391 STARTING AND OPERATING 389 NOTE: WARNING! • The torque converter clutch will not engage, and the Do not use the “TOW/HAUL” feature when driving in transmission will not shift into the top overdrive gear, icy or slippery conditions. The increased engine brak- until the transmission fluid and engine coolant are warm ing can cause the rear wheels to slide, and the vehicle [usually after 1 to 3 miles (2 to 5 km) of driving].
Page 392: Six-Speed Automatic Transmission - 2500/3500 Models Only
390 STARTING AND OPERATING Six-Speed Automatic Transmission — 2500/3500 can be made using the Electronic Range Select (ERS) shift control (refer to “Electronic Range Select (ERS) Operation” Models Only in this section for further information). Pressing the ERS The transmission gear position display (located in the (-/+) switches (on the gear selector) while in the DRIVE instrument cluster) indicates the transmission gear range.
Page 393 STARTING AND OPERATING 391 When parking on a hill, apply the parking brake before WARNING! (Continued) shifting the transmission to PARK, otherwise the load on selector out of PARK with the brake pedal released. the transmission locking mechanism may make it difficult Make sure the transmission is in PARK before leav- to move the gear selector out of PARK.
Page 394 392 STARTING AND OPERATING WARNING! (Continued) CAUTION! (Continued) • When leaving the vehicle, always make sure the mode, and also press the brake pedal. Otherwise, ignition is in the OFF mode, remove the key fob from damage to the gear selector could result. •...
Page 395 STARTING AND OPERATING 393 NEUTRAL (N) DRIVE (D) Use this range when the vehicle is standing for prolonged This range should be used for most city and highway periods with the engine running. The engine may be driving. It provides the smoothest upshifts and downshifts, started in this range.
Page 396 394 STARTING AND OPERATING If the transmission becomes extremely hot or is in danger “Torque Converter Clutch” in this section). During ex- of overheating, the “Transmission Temperature Warning tremely cold temperatures (-16°F [-27°C] or below), opera- Light” may illuminate and the transmission may operate tion may briefly be limited to first and direct gears only.
Page 397 STARTING AND OPERATING 395 4. Wait approximately 10 seconds. will activate ERS mode, display the current gear in the instrument cluster, and set that gear as the top available 5. Restart the engine. gear. Once in ERS mode, tapping (-) or (+) will change the 6.
Page 398 396 STARTING AND OPERATING • The transmission fluid has reached an adequate tem- WARNING! perature. Do not downshift for additional engine braking on a • The engine coolant has reached an adequate tempera- slippery surface. The drive wheels could lose their grip ture.
Page 399 STARTING AND OPERATING 397 WARNING! Do not use the “TOW/HAUL” feature when driving in icy or slippery conditions. The increased engine brak- ing can cause the rear wheels to slide, and the vehicle to swing around with the possible loss of vehicle control, which may cause an accident possibly result- ing in personal injury or death.
Page 400: Four-Wheel Drive Operation - If Equipped
398 STARTING AND OPERATING NOTE: Manually Shifted Transfer Case — If Equipped • The torque converter clutch will not engage, and the The transfer case provides four mode positions: transmission will not shift to sixth gear, until the trans- • Two-Wheel Drive High Range (2H) mission fluid and engine coolant are warm [usually after •...
Page 401 STARTING AND OPERATING 399 four-wheel drive and that the front and rear driveshafts are locked together. This light will illuminate when the transfer Four-Wheel Drive Low Range — This range locks the front case is shifted into either the 4H or 4L position. There is no and rear driveshafts together forcing the front and rear light for the 2H or NEUTRAL positions on some models.
Page 402 400 STARTING AND OPERATING 2H Or 4H To 4L WARNING! NOTE: When shifting into or out of 4L some gear noise You or others could be injured or killed if you leave the may be heard. This noise is normal and is not detrimental vehicle unattended with the transfer case in the NEU- to the vehicle or occupants.
Page 403: Electronically Shifted Transfer Case (Four-Position Switch) - If Equipped
STARTING AND OPERATING 401 NOTE: Electronically Shifted Transfer Case (Four-Position Switch) — If Equipped • Pausing in transfer case NEUTRAL in vehicles equipped with an automatic transmission may require shutting the The electronic shift transfer case is operated by the 4WD engine OFF to avoid gear clash while completing the Control Switch (Transfer Case Switch), which is located on shift.
Page 404 402 STARTING AND OPERATING • Neutral (NEUTRAL) behind another vehicle. Refer to “Recreational Towing” in “Starting And Operating” for further information. For additional information on the appropriate use of each transfer case mode position, see the information below: This electronically shifted transfer case is designed to be driven in the two-wheel drive position (2WD) for normal street and highway conditions on dry, hard surfaced roads.
Page 405 STARTING AND OPERATING 403 Transfer Case Position Indicator Lights NOTE: Before retrying a selection, make certain that all the necessary requirements for selecting a new transfer The Transfer Case Position Indicator Lights (4WD and case position have been met. To retry the selection, turn the 4LOW) are located in the instrument cluster and indicate control switch back to the current position, wait five the current and desired transfer case selection.
Page 406 404 STARTING AND OPERATING When operating your vehicle in 4WD LOW, the engine Shifting Procedure speed is approximately three times that of the 2WD or NOTE: 4WD LOCK positions at a given road speed. Take care not • If any of the requirements to select a new transfer case to overspeed the engine and do not exceed 25 mph position have not been met, the transfer case will not (40 km/h).
Page 407 STARTING AND OPERATING 405 the transfer case will engage/disengage faster if you mo- 2. Shift the transmission into NEUTRAL. mentarily release the accelerator pedal after turning the 3. While still rolling, rotate the transfer case control switch control switch. If the vehicle is stopped, the ignition switch to the desired position.
Page 408: Electronically Shifted Transfer Case (Five-Position Switch) - If Equipped
406 STARTING AND OPERATING NOTE: • If Steps 1 or 2 of either the Preferred or Alternate Procedure are not satisfied prior to attempting the shift, then the desired position indicator light will flash con- tinuously while the original position indicator light is ON, until all requirements have been met.
Page 409 STARTING AND OPERATING 407 NEUTRAL (N) Rear-Wheel Drive High Range — This range is for normal Neutral — This range disengages both the front and rear street and highway driving on dry hard surfaced roads. driveshafts from the powertrain. To be used for flat towing behind another vehicle.
Page 410 408 STARTING AND OPERATING Refer to “Shifting Procedure” in this section for specific 3. When the shift is complete, the indicator light for the shifting instructions. selected position will stop flashing and remain ON. The 4WD LOCK and 4WD LOW positions are designed for If One Or More Of The Following Shift Conditions Are loose, slippery road surfaces only.
Page 411 STARTING AND OPERATING 409 WARNING! WARNING! Always engage the parking brake when powering You or others could be injured or killed if you leave the down the vehicle if the “SVC 4WD Warning Light” is vehicle unattended with the transfer case in the NEU- illuminated.
Page 412 410 STARTING AND OPERATING Shifting Procedure faster if you momentarily release the accelerator pedal after turning the control switch. If the vehicle is stopped, the NOTE: ignition switch must be in the ON position with the engine • If any of the requirements to select a new transfer case either running or OFF.
Page 413 STARTING AND OPERATING 411 Preferred Procedure NOTE: • If Steps 1 or 2 of either the Preferred or Alternate 1. With the engine running, slow the vehicle to 2 to 3 mph Procedure are not satisfied prior to attempting the shift (3 to 5 km/h).
Page 414: Four-Position Electronically Shifted Transfer Case (Eight Speed Transmission Only) - If Equipped
412 STARTING AND OPERATING • Four-Wheel Drive Low Range (4WD LOW) Four-Position Electronically Shifted Transfer Case (Eight Speed Transmission Only) — If Equipped • Neutral (NEUTRAL) This is an electronic shift transfer case and is operated by For additional information on the appropriate use of each the 4WD Control Switch (Transfer Case Switch), which is transfer case mode position, see the information below: located on the instrument panel.
Page 415 STARTING AND OPERATING 413 NEUTRAL (N) NOTE: The transfer case NEUTRAL button is located in the center of the 4WD Control Switch and is pushed by Neutral — This range disengages both the front and rear using a ballpoint pen or similar object. The transfer case driveshafts from the powertrain.
Page 416 414 STARTING AND OPERATING If One Or More Of The Following Shift Conditions Are WARNING! Not Met: Always engage the parking brake when powering 1. The indicator light for the current position will remain down the vehicle if the “SVC 4WD Warning Light” is illuminated.
Page 417 STARTING AND OPERATING 415 Shifting Procedure WARNING! NOTE: • You or others could be injured or killed if you leave • If any of the requirements to select a new transfer case the vehicle unattended with the transfer case in the position have not been met, the transfer case will not NEUTRAL (N) position without first fully engaging shift.
Page 418 416 STARTING AND OPERATING ON position with the engine either running or off. This 4. After the desired position indicator light is ON (not shift cannot be completed if the ignition switch is in the flashing), shift the transmission back into gear. ACC position.
Page 419: Five-Position Electronically Shifted Transfer Case (Eight Speed Transmission Only) - If Equipped
STARTING AND OPERATING 417 • Four-Wheel Drive Lock High Range (4WD LOCK) Five-Position Electronically Shifted Transfer Case (Eight Speed Transmission Only) — If Equipped • Four-Wheel Drive Low Range (4WD LOW) This is an electronic shift transfer case and is operated by •...
Page 420 418 STARTING AND OPERATING 4WD LOW loss of traction. Because the front axle is engaged, this mode will result in lower fuel economy than the 2WD Four-Wheel Drive Low Range — This range provides low mode. speed four-wheel drive. It maximizes torque to the front driveshaft, forcing the front and rear wheels to rotate at the When additional traction is required, the transfer case 4WD same speed.
Page 421 STARTING AND OPERATING 419 Transfer Case Position Indicator Lights NOTE: Before retrying a selection, make certain that all the necessary requirements for selecting a new transfer case The Transfer Case Position Indicator Lights (4WD, 4LOW, position have been met. To retry the selection, push the and 4WD AUTO) are located in the instrument cluster and current position, wait five seconds, and retry selection.
Page 422 420 STARTING AND OPERATING NOTE: Do not attempt to make a shift while only the front WARNING! or rear wheels are spinning. This could cause damage to • You or others could be injured or killed if you leave driveline components. the vehicle unattended with the transfer case in the When operating your vehicle in 4WD LOW, the engine NEUTRAL (N) position without first fully engaging...
Page 423 STARTING AND OPERATING 421 Shifting Procedure stopped or in motion. With the vehicle in motion, the transfer case will engage/disengage faster if you momen- NOTE: tarily release the accelerator pedal after selecting the de- • If any of the requirements to select a new transfer case sired position on the control switch.
Page 424: Air Suspension System (1500 Models) - If Equipped
422 STARTING AND OPERATING Shifting can be performed with the vehicle rolling 2 to NOTE: 3 mph (3 to 5 km/h) or completely stopped. Use either of • If Steps 1 or 2 of either the Preferred or Alternate the following procedures: Procedure are not satisfied prior to attempting the shift or if they no longer are being met while the shift attempt Preferred Procedure...
Page 425 STARTING AND OPERATING 423 • Normal Ride Height (NRH) – This is the standard position of the suspension and is meant for normal driving. • Off-Road 1 (OR1) (Raises the vehicle approximately 1 in [26 mm]) – This position should be the primary position for all off-road driving until Off Road 2 (OR2) is needed.
Page 426 424 STARTING AND OPERATING height will be automatically lowered to OR1. Off-Road 2 NOTE: Automatic Aero Mode may be disabled through may not be available due to vehicle payload, an instru- vehicle settings in the instrument cluster display when ment cluster message will be displayed when this oc- equipped with Uconnect 3.0, or your Uconnect Radio when curs.
Page 427 STARTING AND OPERATING 425 occurs. Refer to “Instrument Cluster Display” in “Un- will move up first and then the front. When lowering the derstanding Your Instrument Panel” for further informa- vehicle, the front will move down first and then the rear. tion.
Page 428: Air Suspension Modes
426 STARTING AND OPERATING Air Suspension Modes Transport Mode The Air Suspension system has multiple modes to protect For towing your vehicle with four wheels off the road, the the system in unique situations: air suspension system has a feature which will put the vehicle into Entry/Exit height and disable the automatic AERO Mode load leveling system.
Page 429: Instrument Cluster Display Messages
STARTING AND OPERATING 427 Protection Strategy Operation In order to “protect” the air suspension system, the vehicle will disable load leveling as required (suspension over- loaded, battery charge low, etc.). Load leveling will auto- matically resume as soon as system operation requirements are met.
Page 430 428 STARTING AND OPERATING The indicator lamps 3 through 6 will illuminate to show the Automatic height changes will occur based on vehicle current position of the vehicle. Flashing indicator lamps speed and the current vehicle height. The indicator lamps will show a position which the system is working to and instrument cluster display messages will operate the achieve.
Page 431: Air Suspension System (Rebel Models Only) - If Equipped
STARTING AND OPERATING 429 • Tire/Jack Mode – Indicator lamps 3 and 6 will be illuminated. Tire/Jack Mode is disabled by driving the vehicle. • Wheel Alignment Mode – Indicator lamps 3 and 4 will be illuminated. Wheel Alignment Mode is disabled by driving the vehicle.
Page 432 430 STARTING AND OPERATING NOTE: The vehicle will automatically enter Aero Mode CAUTION! when the vehicle speed remains between 62 mph (100 km/h) and 66 mph (106 km/h) for greater than 20 If the vehicle is in Off-Road setting, be aware of your seconds or if the vehicle speed exceeds 66 mph (106 km/h).
Page 433 STARTING AND OPERATING 431 NOTE: Automatic Aero Mode may be disabled through CAUTION! vehicle settings on your Uconnect Radio when equipped with UConnect 5.0, 8.4A, or 8.4AN. Refer to “Uconnect When in ENTRY/EXIT setting, be aware of your sur- Settings” in “Understanding Your Instrument Panel” for roundings, you may not have the clearance required for further information.
Page 434: Air Suspension Modes
432 STARTING AND OPERATING be disabled. Refer to “Instrument Cluster Display” in NOTE: This mode is intended to be enabled with engine “Understanding Your Instrument Panel” for further infor- running. mation. Tire/Jack Mode NOTE: If equipped with a touch screen radio all enabling/ To assist with changing a tire, the air suspension system disabling of air suspension features must be done through has a feature which allows the automatic leveling to be...
Page 435: Instrument Cluster Display Messages
STARTING AND OPERATING 433 Wheel Alignment Mode Instrument Cluster Display Messages Before performing a wheel alignment, this mode must be When the appropriate conditions exist, a message will enabled. Refer to “Instrument Cluster Display” in “Under- appear in the instrument cluster display. Refer to “Instru- standing Your Instrument Panel”...
Page 436: Air Suspension System (2500/3500 Models) - If Equipped
434 STARTING AND OPERATING Pushing the “DOWN” button once will move the suspen- (24 km/h) indicator lamp 3 will flash and indicator lamp sion one position lower from the current level, assuming all 4 will remain solid until Entry/Exit Mode is achieved at conditions are met (i.e.
Page 437 STARTING AND OPERATING 435 The system requires that the ignition be in ON/RUN Trailer Decoupling/Unloading - The air suspension sys- position or the engine running with zero vehicle speed for tem will load level (lower/exhaust only) for up to 10 all user requested changes and load leveling.
Page 438: Air Suspension Modes
436 STARTING AND OPERATING Transport Mode WARNING! For towing your vehicle with four wheels off the road, the The air suspension system uses a high pressure vol- air suspension system has a feature which will put the ume of air to operate the system. To avoid personal vehicle below Normal Ride Height (NRH) and disable the injury or damage to the system, see your authorized automatic load leveling system.
Page 439: Instrument Cluster Display Messages
STARTING AND OPERATING 437 Protection Strategy NOTE: The LED will continuously blink until vehicle Alternate Trailer Height (ATH) has been achieved and the In order to “protect” the air suspension system, the vehicle LED will turn off. will disable load leveling as required (suspension over- loaded, battery charge low, etc.).
Page 440 438 STARTING AND OPERATING stuck. The locking front and rear differentials should only CAUTION! (Continued) be engaged during low-speed, extreme off-road situations damage to the drivetrain may occur when the axles where one wheel is likely to not be in contact with the are locked on hard surfaced roads.
Page 441: Stabilizer/Sway Bar System - Power Wagon Only
STARTING AND OPERATING 439 During the command to lock the axle, the indicator light To lock the front axle; move the axle locker switch to will flash until the axle is locked. After the lock command FRONT/REAR LOCK while traveling less than 3 mph has been successfully executed, the light will remain on (5 km/h).
Page 442 440 STARTING AND OPERATING Due to the use of taller springs, this vehicle has an WARNING! increased ride height of approximately 1.9 in (48.3 mm) in the front and 1.5 in (38.1 mm) in the rear. A major Do not disconnect the stabilizer bar and drive on hard advantage to increasing ride height is the positive effect it surfaced roads or at speeds above 18 mph (29 km/h), has on approach/departure and break over angles.
Page 443: Safe Off-Road Driving - Power Wagon Only
STARTING AND OPERATING 441 NOTE: The stabilizer/sway bar may be torque locked due wilderness trails where few travel, providing a source of to left and right suspension height differences. This condi- exciting and satisfying recreation. Before you venture out, tion is due to driving surface differences or vehicle loading. you should contact your local governmental agency to In order for the stabilizer/sway bar to disconnect/ determine the designated off-road vehicle (ORV) trails or...
Page 444 442 STARTING AND OPERATING an RTI of 510, which means you can articulate one front The Basics Of Off-Road Driving wheel 26 inches (66 cm) in the air while the other three You will encounter many types of terrain driving off-road. wheels remain in contact with the ground.
Page 445: Driving In Snow, Mud And Sand
STARTING AND OPERATING 443 • Snow – In heavy snow or for additional control and WARNING! traction at slower speeds, shift the transmission to a low gear and shift the transfer case to 4LO (Low Range) if Always wear your seat belt and firmly tie down cargo. necessary.
Page 446: Crossing Obstacles (Rocks And Other High Points)
444 STARTING AND OPERATING practice before entering any mud hole, get out and CAUTION! (Continued) determine how deep it is, if there are any hidden unseating, while at a reduced tire pressure, reduce your obstacles and if the vehicle can be safely recovered if speed and avoid sharp turns or abrupt maneuvers.
Page 447 STARTING AND OPERATING 445 Using A Spotter Crossing A Ravine, Gully, Ditch, Washout Or Rut There are many times where it is hard to see the obstacle or When crossing a ravine, gully, ditch, washout or a large rut, determine the correct path. Determining the correct path the angled approach is the key to maintaining your vehi- can be extremely difficult when you are confronting many cle’s mobility.
Page 448: Hill Climbing
446 STARTING AND OPERATING Crossing Logs CAUTION! To cross a log, approach it at a slight angle (approximately Winching or rocking the vehicle off hard objects in- 10 to 15 degrees). This allows one front tire to be on top of creases the risk of underbody damage.
Page 449 STARTING AND OPERATING 447 • Driving Up Hill – Once you have determined your ability • Driving Down Hill – Before driving down a steep hill to proceed and have shifted into the appropriate gear, line you need to determine if it is too steep for a safe descent. your vehicle up for the straightest possible run.
Page 450: Driving Through Water
448 STARTING AND OPERATING • Driving Across An Incline – If at all possible avoid WARNING! driving across an incline. If it is necessary, know your vehicle’s abilities. Driving across an incline places more If the engine stalls or you lose headway or cannot weight on the down hill wheels, which increases the make it to the top of a steep hill or grade, never attempt possibilities of a down hill slide or rollover.
Page 451 STARTING AND OPERATING 449 (Low Range) and proceed very slowly with a constant slow bottoms the vehicle will sink in, effectively increasing speed (3-5 mph [5–8 km/h] maximum) and light throttle. the water level on the vehicle. Be sure to consider this Keep the vehicle moving;...
Page 452: Airing Down For Off-Road Driving
450 STARTING AND OPERATING • Crossing Ditches, Streams, Shallow Rivers Or Other WARNING! Flowing Water – Flowing water can be extremely dan- gerous. Never attempt to cross a fast running stream or Never drive through fast moving deep water. It can river even in shallow water.
Page 453: Vehicle Recovery
STARTING AND OPERATING 451 would be the first choice. If you have ample room, an CAUTION! additional vehicle and there is low risk of vehicle impinge- ment on the surroundings, then using a tow strap to the Reduced tire pressure increases the risk of tire damage vehicle tow hooks would be fast and easy.
Page 454 452 STARTING AND OPERATING the debris from the tread and improve the traction. You least 20 to 30 feet (6 to 9 meters) between the vehicles to want to create a rocking motion with the vehicle. This allow for a safe recovery. If necessary join two tow straps helps build vehicle momentum, which hopefully gets together using a 1 ½...
Page 455 STARTING AND OPERATING 453 around its base and hook the cable to the strap. If it is WARNING! another vehicle, then place that vehicle in PARK and block the front tires. If you cannot find an anchor point within Never use tow straps with end hooks or link two straps reach try using your spare tire by burying it.
Page 456: After Driving Off-Road
454 STARTING AND OPERATING After Driving Off-Road WARNING! Off-road operation puts more stress on your vehicle than Abrasive material in any part of the brakes may cause does most on-road driving. After going off-road, it is excessive wear or unpredictable braking. You might always a good idea to check for damage.
Page 457: Driving On Slippery Surfaces
STARTING AND OPERATING 455 driving and cornering, the limited-slip unit performs simi- DRIVING ON SLIPPERY SURFACES larly to a conventional differential. On slippery surfaces, Acceleration however, the differential delivers more of the driving effort Rapid acceleration on snow covered, wet, or other slippery to the rear wheel having the better traction.
Page 458: Driving Through Water
456 STARTING AND OPERATING • Slow down during rainstorms or when the roads are Flowing/Rising Water slushy. WARNING! • Slow down if the road has standing water or puddles. Do not drive on or across a road or path where water is •...
Page 459 STARTING AND OPERATING 457 WARNING! (Continued) CAUTION! (Continued) • Driving through standing water limits your vehicle’s • Driving through standing water may cause damage braking capabilities, which increases stopping dis- to your vehicle’s drivetrain components. Always in- tances. Therefore, after driving through standing spect your vehicle’s fluids (i.e., engine oil, transmis- water, drive slowly and lightly press on the brake sion, axle, etc.) for signs of contamination (i.e., fluid...
Page 460: Off-Road Driving Tips
458 STARTING AND OPERATING • Completely inspect the underbody of your vehicle. OFF-ROAD DRIVING TIPS Check tires, body structure, steering, suspension, and Care should be taken when attempting to climb steep hills exhaust system for damage. or driving diagonally across a hill or slope. If natural •...
Page 461: Winch Usage - Power Wagon Only (If Equipped)
STARTING AND OPERATING 459 Tensioning The Wire Rope WARNING! (Continued) The winch rope must be properly tensioned before use. prevent a collision. If you have been operating your Follow the instructions below to tension the rope: vehicle in dirty conditions, get your brakes checked and cleaned as necessary.
Page 462 460 STARTING AND OPERATING Winch Motor Thermal Protection CAUTION! Your winch is equipped with a thermal protection device in Wire rope must spool on the winch drum in the the motor. If the winch is operated for an excessive direction indicated on the drum rotation decal on the duration, the device may interrupt motor function to winch.
Page 463: Understanding The Features Of Your Winch
STARTING AND OPERATING 461 Understanding The Features Of Your Winch Winch Components 1. Motor: The winch motor is powered by the vehicle 2. Remote Socket: The remote socket allows the remote charging system and features a thermal protection control to be attached to the control pack to allow the switch that automatically stops motor function in the winch to function.
Page 464: Winch Accessories
462 STARTING AND OPERATING 3. Winch Drum With Integral Brake: The winch drum CAUTION! allows the wire rope to be stored on the winch and transmits force to the wire rope. The winch is equipped If not installed, the hook strap must be placed on the with an integral brake that will stop rotation of the hook.
Page 465: Operating Your Winch
STARTING AND OPERATING 463 Snatch/Block Pulley: Used Tree Trunk Protector: Typically properly, multi-purpose made of tough, high-quality ny- snatch block allows you to (1) lon, it provides the operator an increase the winch’s pulling attachment point for the winch power; and (2) change your rope to a wide variety of anchor pulling direction without dam- points and objects, as well as...
Page 466 464 STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) • Never touch wire rope or hook while in tension or • Never winch when there are less than five wraps of under load. wire rope around the winch drum. • Never engage or disengage clutch if winch is under •...
Page 467 STARTING AND OPERATING 465 Vehicle Recovery Using The Winch 1. Inspect the winch, winch mount, and wire rope for damage. Do not use the winch if the mount is loose or rope shows excessive wear or damage. CAUTION! • Always Know Your Winch: Take the time to fully read and understand the included Installation and Operations Guide, and Basic Guide to Winching Techniques, in order to understand your winch and...
Page 468 466 STARTING AND OPERATING 2. Put on gloves. 3. Disengage the clutch to allow free spooling of the winch drum, rotate the clutch lever on the winch to disengage. Freespooling conserves battery power. Hook Strap 5. Pull the wire to the anchor point. Pull out enough wire rope to reach your anchor point.
Page 469 STARTING AND OPERATING 467 Pulling Wire Rope Tree Trunk Protector 6. Secure to the anchor point. Once you have established CAUTION! your anchor point, secure the tree-trunk protector or choker-chain around the object. Always be certain the anchor you select will withstand the load.
Page 470 468 STARTING AND OPERATING NOTE: How to choose an anchor point: A secure anchor is critical to winching operations. An anchor must be strong enough to hold while winching. Natural anchors include trees, stumps and rocks. Hook the cable as low as possible.
Page 471 STARTING AND OPERATING 469 Winch Box Remote Control Connector Pulling Wire Rope Under Tension 10. Put wire rope under tension. Using the remote control 11. Check your anchor. Make sure all connections are switch, slowly wind the wire rope until no slack secured and free of debris before continuing with the remains.
Page 472 470 STARTING AND OPERATING or remove the blanket, slack the tension on the wire rope first. 13. Establish no people zones: Make your intentions clear. Be sure that everyone in the immediate vicinity surrounding the winching operation is completely aware of your intentions before you pull. Declare where the spectators should not stand - never behind or in front of the vehicle and never near the wire rope or snatch block.
Page 473 STARTING AND OPERATING 471 14. Begin winching. With the winching vehicles engine on NOTE: and light tension already on the wire rope, begin • Avoid overheating the winch motor. For extended winching slowly and steadily. Be sure that the wire winching, stop at reasonable intervals to allow the rope is winding evenly and tightly around the spooling winch motor to cool down.
Page 474 472 STARTING AND OPERATING 15. Secure vehicle. Once recovery of the vehicle is com- WARNING! plete, be sure to secure the vehicle’s brakes and shift the transmission to PARK. Release tension in the wire To prevent serious injury, NEVER put your fingers rope.
Page 475: Rigging Techniques
STARTING AND OPERATING 473 straight-line pulling situation. You will have to assess what technique is correct for your situation. Think safety at all times. How To Change The Pulling Direction Hook In Stored Position 19. Disconnect the remote control. Disconnect the remote control cord from the control box and store in a clean and dry place.
Page 476 474 STARTING AND OPERATING All winching operations should have a straight line from Double Line the winch to the object being pulled. This minimizes the wire rope collecting on one side of the drum affecting pulling efficiency and damaging wire rope. A snatch block, secured to a point directly in front of the vehicle will enable you to change your pulling direction while still allowing the wire rope to be at 90°...
Page 477: Power Steering
STARTING AND OPERATING 475 the clevis/shackle. Attach the shackle to the two ends of Refer to “Instrument Cluster Display” in “Understanding the strap/chain, being careful not to over tighten (tighten Your Instrument Panel” for further information. and back-off 1/2 turn). If the Steering icon is displayed and the “SERVICE POWER STEERING –...
Page 478 476 STARTING AND OPERATING If for some reason the power assist is interrupted, it will Power Steering Fluid Check — 2500/3500 Models still be possible to steer your vehicle. Under these condi- Checking the power steering fluid level at a defined service tions, you will observe a substantial increase in steering interval is not required.
Page 479: Fuel Saver Technology 5.7L/6.4L Engines Only - If Equipped
STARTING AND OPERATING 477 FUEL SAVER TECHNOLOGY 5.7L/6.4L ENGINES ONLY — IF EQUIPPED This feature offers improved fuel economy by shutting off four of the engine’s eight cylinders during light load and cruise conditions. The system is automatic with no driver inputs or additional driving skills required.
Page 480 478 STARTING AND OPERATING When parking on a hill, it is important to turn the front WARNING! (Continued) wheels toward the curb on a downhill grade and away vehicle equipped with Keyless Enter-N-Go in the from the curb on an uphill grade. Apply the parking brake ACC or ON/RUN mode.
Page 481: Brake System
STARTING AND OPERATING 479 BRAKE SYSTEM ELECTRONIC BRAKE CONTROL SYSTEM If power assist is lost for any reason (for example, repeated Your vehicle is equipped with an advanced Electronic brake applications with the engine off), the brakes will still Brake Control system (EBC). This system includes Elec- function.
Page 482: Anti-Lock Brake System (Abs)
480 STARTING AND OPERATING • The clicking sound of solenoid valves. If the “Brake System Warning Light” remains on or comes on while driving, it indicates that the brake system is not • Brake pedal pulsations. functioning properly and that immediate service is re- •...
Page 483: Anti-Lock Brake Warning Light
STARTING AND OPERATING 481 service is required. However, the conventional brake sys- WARNING! (Continued) tem will continue to operate normally if the “Brake System • The ABS cannot prevent the natural laws of physics Warning Light” is not on. from acting on the vehicle, nor can it increase brak- If the “Anti-Lock Brake Warning Light”...
Page 484: Hill Start Assist (Hsa)
482 STARTING AND OPERATING • The vehicle must be stopped. WARNING! • Park brake must be off. The Brake Assist System (BAS) cannot prevent the • Driver door must be closed. natural laws of physics from acting on the vehicle, nor •...
Page 485 STARTING AND OPERATING 483 WARNING! (Continued) WARNING! (Continued) • HSA is not a parking brake. Always apply the operation to ensure safe operation of the vehicle under all road conditions. Your complete attention is always parking brake fully when leaving your vehicle. Also, required while driving to maintain safe control of your be certain to leave the transmission in PARK.
Page 486: Traction Control System (Tcs)
484 STARTING AND OPERATING For vehicles not equipped with the instrument cluster Traction Control System (TCS) display, perform the following steps: This system monitors the amount of wheel spin of each of the driven wheels. If wheel spin is detected, the TCS may 1.
Page 487 STARTING AND OPERATING 485 the intended path, ESC applies the brake of the appropriate WARNING! (Continued) wheel to assist in counteracting the oversteer or understeer road conditions. ESC cannot prevent accidents, in- condition. cluding those resulting from excessive speed in •...
Page 488 486 STARTING AND OPERATING ESC Operating Modes NOTE: For vehicles with multiple partial ESC modes a momentary button push will toggle the ESC mode. Mul- NOTE: Depending upon model and mode of operation, the tiple momentary button pushed may be required to return ESC system may have multiple operating modes.
Page 489 STARTING AND OPERATING 487 message will display in the instrument cluster. To turn ESC WARNING! (Continued) on again, momentarily push the “ESC Off” switch. • The Electronic Stability Control (ESC) cannot pre- NOTE: System may switch from ESC “Full Off” to “Partial vent the natural laws of physics from acting on the Off”...
Page 490: Electronic Roll Mitigation (Erm)
488 STARTING AND OPERATING The “ESC Activation/Malfunction Indicator Light” (lo- Electronic Roll Mitigation (ERM) cated in the instrument cluster) starts to flash as soon as the This system anticipates the potential for wheel lift by tires lose traction and the ESC system becomes active. The monitoring the driver’s steering wheel input and the speed “ESC Activation/Malfunction Indicator Light”...
Page 491: Trailer Sway Control (Tsc) - If Equipped
STARTING AND OPERATING 489 WARNING! (Continued) WARNING! leaving the roadway or striking objects or other ve- If TSC activates while driving, slow the vehicle down, hicles. The capabilities of an ERM-equipped vehicle stop at the nearest safe location, and adjust the trailer must never be exploited in a reckless or dangerous load to eliminate trailer sway.
Page 492 490 STARTING AND OPERATING • Vehicle speed is below 5 mph (8 km/h). • 7th = 4.3 mph (7 km/h) • Parking brake is released. • 8th = 5.0 mph (8 km/h) • Driver door is closed. • 9th = 5.6 mph (9 km/h) – If Equipped Activating HDC NOTE: During HDC, the +/- shifter input is used for HDC Once HDC is enabled, it will activate automatically if...
Page 493 STARTING AND OPERATING 491 Disabling HDC seconds then extinguish when the driver pushes the HDC switch but enable conditions are not met. HDC will be deactivated and disabled if any of the • The cluster icon and switch lamp will flash for several following conditions occur: seconds then extinguish when HDC disables due to •...
Page 494: Tire Safety Information
492 STARTING AND OPERATING TIRE SAFETY INFORMATION molded into the sidewall preceding the size designation. Example: P215/65R15 95H. Tire Markings • European — Metric tire sizing is based on European design standards. Tires designed to this standard have the tire size molded into the sidewall beginning with the section width.
Page 495 STARTING AND OPERATING 493 Tire Sizing Chart EXAMPLE: Example Size Designation: P215/65R15XL 95H, 215/65R15 96H, LT235/85R16C, T145/80D18 103M, 31x10.5 R15 LT P = Passenger car tire size based on U.S. design standards, or ..blank..= Passenger car tire based on European design standards, or LT = Light truck tire based on U.S.
Page 496 494 STARTING AND OPERATING EXAMPLE: Service Description: 95 = Load Index – A numerical code associated with the maximum load a tire can carry H = Speed Symbol – A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions –...
Page 497: Tire Identification Number (Tin)
STARTING AND OPERATING 495 Tire Identification Number (TIN) the TIN on the outboard side of black sidewall tires as mounted on the vehicle. If the TIN is not found on the The TIN may be found on one or both sides of the tire; outboard side, then you will find it on the inboard side of however, the date code may only be on one side.
Page 498: Tire Terminology And Definitions
496 STARTING AND OPERATING Tire Terminology And Definitions Term Definition B-Pillar The vehicle B-Pillar is the structural member of the body located be- hind the front door. Cold Tire Inflation Pressure Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.6 km) after sitting for a minimum of three hours.
Page 499: Tire Loading And Tire Pressure
STARTING AND OPERATING 497 Tire Loading And Tire Pressure Tire And Loading Information Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar or the rear edge of the driver’s side door. Check the inflation pressure of each tire, including the spare tire (if equipped), at least monthly and inflate to the recommended pressure for your vehicle.
Page 500 498 STARTING AND OPERATING Tire And Loading Information Placard WARNING! • Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them.
Page 501 STARTING AND OPERATING 499 Loading Steps For Determining Correct Load Limit— The vehicle maximum load on the tire must not exceed the (1) Locate the statement “The combined weight of load carrying capacity of the tire on your vehicle. You will occupants and cargo should never exceed XXX kg or not exceed the tire’s load carrying capacity if you adhere to XXX lbs.”...
Page 502 500 STARTING AND OPERATING (6) If your vehicle will be towing a trailer, load from NOTE: your trailer will be transferred to your vehicle. Consult • If your vehicle will be towing a trailer, load from your this manual to determine how this reduces the available trailer will be transferred to your vehicle.
Page 503 STARTING AND OPERATING 501 WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the rec- ommended load capacity for your vehicle. Never over- load them.
Page 504: Tires - General Information
502 STARTING AND OPERATING TIRES — GENERAL INFORMATION WARNING! (Continued) Tire Pressure • Overinflated or underinflated tires can affect vehicle handling and can fail suddenly, resulting in loss of Proper tire inflation pressure is essential to the safe and vehicle control. satisfactory operation of your vehicle.
Page 505: Tire Inflation Pressures
STARTING AND OPERATING 503 Tread Wear CAUTION! Improper cold tire inflation pressures can cause abnormal After inspecting or adjusting the tire pressure, always wear patterns and reduced tread life, resulting in the need reinstall the valve stem cap. This will prevent moisture for earlier tire replacement.
Page 506: Tire Pressures For High Speed Operation
504 STARTING AND OPERATING Example: If garage temperature = 68°F (20°C) and the WARNING! (Continued) outside temperature = 32°F (0°C) then the cold tire inflation cause them to fail. You could have a serious collision. pressure should be increased by 3 psi (21 kPa), which Do not drive a vehicle loaded to the maximum capacity equals 1 psi (7 kPa) for every 12°F (7°C) for this outside at continuous speeds above 75 mph (120 km/h).
Page 507: Tire Types
STARTING AND OPERATING 505 Damaged Run Flat tires, or Run Flat tires that have Summer tires do not contain the all season designation or experienced a loss of pressure should be replaced immedi- mountain/snowflake symbol on the tire sidewall. Use ately with another Run Flat tire of identical size and service Summer tires only in sets of four;...
Page 508: Run Flat Tires - If Equipped
506 STARTING AND OPERATING For speeds above 75 mph (120 km/h), refer to original Spare Tires — If Equipped equipment or an authorized tire dealer for recommended NOTE: For vehicles equipped with Tire Service Kit instead safe operating speeds, loading and cold tire inflation of a spare tire, please refer to the “Tire Service Kit”...
Page 509 STARTING AND OPERATING 507 Compact Spare Tire — If Equipped WARNING! (Continued) The compact spare is for temporary emergency use only. You more than 50 mph (80 km/h). Temporary use spares can identify if your vehicle is equipped with a compact have limited tread life.
Page 510 508 STARTING AND OPERATING Do not install a wheel cover or attempt to mount a Limited Use Spare — If Equipped conventional tire on the collapsible spare wheel, since the The limited use spare tire is for temporary emergency use wheel is designed specifically for the collapsible spare tire.
Page 511: Tire Spinning
STARTING AND OPERATING 509 Tire Spinning When stuck in mud, sand, snow, or ice conditions, do not spin your vehicle’s wheels above 30 mph (48 km/h) or for longer than 30 seconds continuously without stopping. Refer to “Freeing A Stuck Vehicle” in “What To Do In Emergencies”...
Page 512: Life Of Tire
510 STARTING AND OPERATING Life Of Tire Keep dismounted tires in a cool, dry place with as little exposure to light as possible. Protect tires from contact with The service life of a tire is dependent upon varying factors oil, grease, and gasoline. including, but not limited to: Replacement Tires •...
Page 513: Tire Chains (Traction Devices)
STARTING AND OPERATING 511 It is recommended you contact your authorized tire dealer WARNING! (Continued) or original equipment dealer with any questions you may control and have a collision. have on tire specifications or capability. Failure to use • Failure to equip your vehicle with tires having ad- equivalent replacement tires may adversely affect the equate speed capability can result in sudden tire safety, handling, and ride of your vehicle.
Page 514 512 STARTING AND OPERATING Vehicle Axle Recommendations Tire Sizes Chain Class 1500 Models Rear Only P265/70R17 S Class 2500 Models Rear Only LT245/70R17E U Class LT265/70R18E LT275/70R18E 2500 Power Wagon Models Rear Only LT285/70R17D U Class 3500 (Single Rear Wheel) Rear Only LT265/70R18E U Class...
Page 515: Tire Rotation Recommendations
STARTING AND OPERATING 513 desired. The reasons for any rapid or unusual wear should CAUTION! (Continued) be corrected prior to rotation being performed. • Do not drive for a prolonged period on dry pave- The suggested rotation method is the “rearward cross” ment.
Page 516: Directional Tires - If Equipped
514 STARTING AND OPERATING Directional Tires — If Equipped For the R/T package with 22” tires and wheels, the rotational direction of the tire must be taken into consid- eration when rotating the tires. The recommended rotation pattern for directional tires is shown below. Tire Rotation NOTE: If your vehicle is equipped with a Tire Pressure Information System (TPIS):...
Page 517: Department Of Transportation Uniform Tire Quality Grades
STARTING AND OPERATING 515 over 5 mph (8km/h) for at about a 15 minute period. DEPARTMENT OF TRANSPORTATION UNIFORM You may need to drive for 20 minutes to account slower TIRE QUALITY GRADES speeds and stops. The following tire grading categories were established •...
Page 518: Traction Grades
516 STARTING AND OPERATING Traction Grades under the Federal Motor Vehicle Safety Standard No. 109. Grades B and A represent higher levels of perfor- The Traction grades, from highest to lowest, are AA, A, mance on the laboratory test wheel, than the minimum B, and C.
Page 519 STARTING AND OPERATING 517 maximum inflation pressure molded into the tire sidewall. For example, your vehicle may have a recommended cold Refer to “Tires – General Information” in “Starting And (parked for more than three hours) placard pressure of 30 Operating”...
Page 520: Premium System
518 STARTING AND OPERATING • The TPMS is not a substitute for proper tire mainte- CAUTION! (Continued) nance, and it is the driver’s responsibility to maintain • Using aftermarket tire sealants may cause the Tire correct tire pressure using an accurate tire pressure Pressure Monitoring System (TPMS) sensor to be- gauge, even if under-inflation has not reached the level come inoperable.
Page 521 STARTING AND OPERATING 519 The TPMS consists of the following components: • Receiver module • Four TPM sensors • Various TPMS messages, which display in the instru- ment cluster • TPM Telltale Light Tire Pressure Monitoring Low Pressure Warnings The “Tire Pressure Monitoring Telltale Light” will illuminate in the instrument cluster and a chime “LOW TIRE PRESSURE”...
Page 522 520 STARTING AND OPERATING Service TPMS Warning If the ignition switch is cycled, this sequence will repeat, providing the system fault still exists. If the system fault no If a system fault is detected, the “Tire Pressure Monitoring longer exists, the “Tire Pressure Monitoring Telltale Light” Telltale Light”...
Page 523: Trucks
STARTING AND OPERATING 521 • If you install the non matching full size spare or compact Tire Pressure Information System (TPIS) 3500 spare tire in place of a road tire that has a pressure below Series Trucks the low-pressure warning limit, upon the next ignition Your vehicle may be equipped with a Tire Pressure Infor- switch cycle, the TPM Telltale Light and a “LOW TIRE”...
Page 524: General Information
522 STARTING AND OPERATING If a system fault is detected, the instrument cluster will General Information display a SERVICE TPM SYSTEM message for a mini- This device complies with Part 15 of the FCC rules and RSS mum of five seconds and then display dashes (- -) in place 210 of Industry Canada.
Page 525: L Engine
STARTING AND OPERATING 523 While operating on gasoline with an octane number of 87, cause for concern. However, if the engine is heard making hearing a light knocking sound from the engine is not a a heavy knocking sound, see your dealer immediately. Use cause for concern.
Page 526: Reformulated Gasoline
524 STARTING AND OPERATING of gasoline with an octane number lower than 87 can cause CAUTION! engine failure and may void or not be covered by the New Vehicle Limited Warranty. DO NOT use gasoline containing methanol or gasoline containing more than 15% ethanol (E-15). Use of these Poor quality gasoline can cause problems such as hard blends may result in starting and drivability problems, starting, stalling, and hesitations.
Page 527: Cng And Lp Fuel System Modifications
STARTING AND OPERATING 525 • Operate in a lean mode. gasoline may not be indicated on the gasoline pump, therefore, you should ask your gasoline retailer whether • OBD II “Malfunction Indicator Light” on. the gasoline contains MMT. MMT is prohibited in Federal •...
Page 528: Fuel System Cautions
526 STARTING AND OPERATING Fuel System Cautions NOTE: Intentional tampering with the emissions control system can result in civil penalties being assessed against you. CAUTION! Carbon Monoxide Warnings Follow these guidelines to maintain your vehicle’s performance: • The use of leaded gasoline is prohibited by Federal WARNING! law.
Page 529: Flexible Fuel (3.6L Engine Only) - If Equipped
STARTING AND OPERATING 527 FLEXIBLE FUEL (3.6L ENGINE ONLY) — IF WARNING! EQUIPPED Ethanol vapors are extremely flammable and could E-85 General Information cause serious personal injury. Never have any smoking The information in this section is unique for Flexible Fuel materials lit or products that can cause spark in or near vehicles only.
Page 530: Selection Of Engine Oil For Flexible Fuel Vehicles (E-85) And Gasoline Vehicles
528 STARTING AND OPERATING NOTE: Starting • Use seasonally adjusted E-85 fuel (ASTM D5798). With The characteristics of E-85 fuel make it unsuitable for use non-seasonally adjusted E-85 fuel, hard starting and when ambient temperatures fall below 0°F (-18°C). In the rough idle following start up may be experienced even if range of 0°F (-18°C) to 32°F (0°C), an increase in the time it the above recommendations are followed, especially...
Page 531: Maintenance
STARTING AND OPERATING 529 CAUTION! Replacing fuel system components with non-ethanol compatible components can damage your vehicle. Maintenance CAUTION! Do not use ethanol mixtures greater than 85% in your vehicle. It will make it more difficult for your engine to start under cold conditions, may affect drivability, and could cause engine damage.
Page 532 530 STARTING AND OPERATING NOTE: CAUTION! (Continued) • When the fuel nozzle “clicks” or shuts off, the fuel tank • A poorly fitting fuel filler cap may cause the “Mal- is full. function Indicator Light (MIL)” to turn on. • To avoid fuel spillage and overfilling, do not “top •...
Page 533: Loose Fuel Filler Cap Message
STARTING AND OPERATING 531 Loose Fuel Filler Cap Message Gross Vehicle Weight Rating (GVWR) The GVWR is the total permissible weight of your vehicle If the vehicle diagnostic system determines that including driver, passengers, vehicle, options and cargo. the fuel filler cap is loose, improperly installed, The label also specifies maximum capacities of front and or damaged, a loose gascap indicator will dis- rear axle systems (GAWR).
Page 534 532 STARTING AND OPERATING Tire Size The entire vehicle should first be weighed on a commercial scale to insure that the GVWR has not been exceeded. The The tire size on the Vehicle Certification Label represents weight on the front and rear of the vehicle should then be the actual tire size on your vehicle.
Page 535: Trailer Towing
STARTING AND OPERATING 533 TRAILER TOWING Gross Trailer Weight (GTW) In this section you will find safety tips and information on The GTW is the weight of the trailer plus the weight of all limits to the type of towing you can reasonably do with cargo, consumables and equipment (permanent or tempo- your vehicle.
Page 536 534 STARTING AND OPERATING Gross Axle Weight Rating (GAWR) Trailer Sway Control The GAWR is the maximum capacity of the front and rear The trailer sway control is supported by a mechanical axles. Distribute the load over the front and rear axles telescoping link that can be installed between the hitch evenly.
Page 537 STARTING AND OPERATING 535 Weight-Distributing Hitch WARNING! (Continued) A weight-distributing system works by applying leverage • Weight distributing systems may not be compatible through spring (load) bars. They are typically used for with surge brake couplers. Consult with your hitch heavier loads to distribute trailer tongue weight to the tow and trailer manufacturer or a reputable Recreational vehicle’s front axle and the trailer axle(s).
Page 538 536 STARTING AND OPERATING With Weight-Distributing Hitch (Correct) Improper Adjustment Of Weight-Distributing Hitch (Incorrect)
Page 539 STARTING AND OPERATING 537 Recommended Distribution Hitch Adjustment Towing With 1500 Air Suspension 1. Set air suspension to normal ride height. No action is required if already in normal ride height. NOTE: The vehicle must remain in the engine run position with all doors closed while attaching a trailer for proper leveling of the air suspension system.
Page 540 538 STARTING AND OPERATING 8. Use the instrument cluster or touch screen radio settings NOTE: Normal Ride Height (NRH) or Alternate Trailer and switch off tire jack mode. Make sure the truck Height (ATH) can be used. The vehicle must remain in the returns to normal ride height.
Page 541 STARTING AND OPERATING 539 the height of the front fender is approximately (H2-H1)/ Example 2500/3500 Measurement Example 2+H1 (about 1/2 the difference between H2 and H1 Height (mm) above normal ride height [H1]). 1030 6. Preform a visual inspection of the trailer and weight 1058 distributing hitch to confirm manufacturers’...
Page 542: Trailer Hitch Type And Maximum Trailer Weight
540 STARTING AND OPERATING Your truck may be equipped with a 5th wheel hitch option. Trailer Hitch Type and Maximum Trailer Weight Refer to the separately provided 5th wheel hitch safety, Models lbs (816 kg) care, assembly, and operating instructions. Fifth Wheel - 2500 25,000 lbs (11,339 kg) / 5000 Gooseneck Hitch...
Page 543: Trailer And Tongue Weight
STARTING AND OPERATING 541 Trailer And Tongue Weight CAUTION! Never exceed the maximum tongue weight stamped on • Do not tow a trailer at all during the first 500 miles your trailer hitch or the weights specified in the informa- (805 km) the new vehicle is driven.
Page 544 542 STARTING AND OPERATING Towing Requirements — Tires WARNING! (Continued) • Do not attempt to tow a trailer while using a compact to brakes, axle, engine, transmission, steering, sus- spare tire. pension, chassis structure or tires. • Safety chains must always be used between your •...
Page 545 STARTING AND OPERATING 543 • Do not interconnect the hydraulic brake system or Towing Requirements — Trailer Brakes vacuum system of your vehicle with that of the trailer. This could cause inadequate braking and possible per- WARNING! sonal injury. • Do not connect trailer brakes to your vehicle’s hy- •...
Page 546 544 STARTING AND OPERATING NOTE: This module has been designed and verified with The user interface consists of the following: electric trailer brakes and new electric over hydraulic Manual Brake Control Lever systems. Some previous EOH systems may not be compat- ible with ITBM.
Page 547 STARTING AND OPERATING 545 GAIN Adjustment Buttons (+/-) 3. When a trailer with electric/EOH brakes is plugged in, the trailer connected message should appear in the Pushing these buttons will adjust the brake control power instrument cluster display (if the connection is not output to the trailer brakes in 0.5 increments.
Page 548 546 STARTING AND OPERATING Repeat steps 8 and 9 until the GAIN setting is at a point just below trailer wheel lockup. If towing a heavier trailer, trailer wheel lockup may not be attainable even with the maximum GAIN setting of 10. Light Electric Heavy Electric Light EOH...
Page 549 STARTING AND OPERATING 547 Towing Requirements — Trailer Lights And Wiring WARNING! (If Equipped) Connecting a trailer that is not compatible with the Whenever you pull a trailer, regardless of the trailer size, ITBM system may result in reduced or complete loss of stoplights and turn signals on the trailer are required for trailer braking.
Page 550: Towing Tips
548 STARTING AND OPERATING NOTE: • Disconnect trailer wiring connector from the vehicle before launching a boat (or any other device plugged into vehicle’s electrical connect) into water. • Be sure to reconnect after clear from water area. Seven-Pin Connector 1 —...
Page 551 STARTING AND OPERATING 549 Automatic Transmission NOTE: Check the automatic transmission fluid level be- fore towing (6-speed automatic only). The DRIVE range can be selected when towing. The transmission controls include a drive strategy to avoid Tow/Haul Mode frequent shifting when towing. However, if frequent shift- To reduce potential for automatic transmission overheat- ing does occur while in DRIVE, select TOW/HAUL mode ing, activate TOW/HAUL mode when driving in hilly...
Page 552: Snowplow
550 STARTING AND OPERATING Highway Driving WARNING! Reduce speed. Snowplows and other aftermarket equipment should Air Conditioning not be added to the front end of your vehicle. The airbag crash sensors may be affected by the change in Turn off temporarily. the front end structure.
Page 553 STARTING AND OPERATING 551 • Check the runners and cutting edge for excessive wear. NOTE: Before installation of a snowplow it is highly recommended that the owner/installer obtain and follow The cutting edge should be ¼ to ½ in (6 cm to 1.2 cm) the recommendations contained within the current Body above ground in snow plowing position.
Page 554 552 STARTING AND OPERATING NOTE: Detach the snowplow when transporting passengers. be familiar with the area and surface to be cleaned. Reduce speed and use extreme caution when plowing unfamiliar Vehicle front end wheel alignment was set to specifications areas or under poor visibility. at the factory without consideration for the weight of the plow.
Page 555: Recreational Towing (Behind Motorhome, Etc.)
STARTING AND OPERATING 553 RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) Towing This Vehicle Behind Another Vehicle Towing Condition Wheels OFF Two-Wheel Four-Wheel Drive Models The Ground Drive Models Flat Tow NONE NOT AL- See Instructions • Automatic transmission in PARK LOWED •...
Page 556 554 STARTING AND OPERATING NOTE: 1. Properly secure the dolly to the tow vehicle, following the dolly manufacturer’s instructions. • When towing your vehicle, always follow applicable state and provincial laws. Contact state and provincial 2. Drive the rear wheels onto the tow dolly. Highway Safety offices for additional details.
Page 557 STARTING AND OPERATING 555 Recreational Towing — Four-Wheel Drive Models CAUTION! (Continued) NOTE: Both the manual shift and electronic shift transfer • Automatic transmissions must be placed in PARK, cases must be shifted into NEUTRAL (N) for recreational and manual transmissions must be placed in gear towing.
Page 558 556 STARTING AND OPERATING Shifting Into NEUTRAL (N) 1. Bring the vehicle to a complete stop, with the engine running. Firmly apply the parking brake. Use the following procedure to prepare your vehicle for recreational towing. 2. Shift the transmission to NEUTRAL. NOTE: If vehicle is equipped with air suspension, ensure WARNING! the vehicle is set to Normal Ride Height.
Page 559 STARTING AND OPERATING 557 7. Shift the transmission into REVERSE. NOTE: With electronic shift transfer case: • Steps 2 through 4 are requirements that must be met 8. Release the brake pedal (and clutch pedal on manual before pushing the NEUTRAL (N) button, and must transmissions) for five seconds and ensure that there is continue to be met until the shift has been completed.
Page 560 558 STARTING AND OPERATING Shifting Out Of NEUTRAL (N) NOTE: When shifting out of transfer case NEUTRAL (N), turning the engine OFF is not required, but may be helpful Use the following procedure to prepare your vehicle for to avoid gear clash. With the 8-speed automatic transmis- normal usage: sion, the engine must remain running, since turning the 1.
Page 561 STARTING AND OPERATING 559 NOTE: With electronic shift transfer case: • Steps 3 and 4 are requirements that must be met before pushing the button to shift out of NEUTRAL (N), and must continue to be met until the shift has been com- pleted.
Page 563 WHAT TO DO IN EMERGENCIES CONTENTS HAZARD WARNING FLASHERS ... .562 GEAR SELECTOR OVERRIDE — 6-SPEED TRANSMISSION ......604 IF YOUR ENGINE OVERHEATS .
Page 564: Hazard Warning Flashers
562 WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHERS IF YOUR ENGINE OVERHEATS The Hazard Warning flasher switch is located on the upper In any of the following situations, you can reduce the switch bank just below the radio. potential for overheating by taking the appropriate action. •...
Page 565: Wheel And Tire Torque Specifications
WHAT TO DO IN EMERGENCIES 563 WHEEL AND TIRE TORQUE SPECIFICATIONS WARNING! Proper lug nut/bolt torque is very important to ensure that You or others can be badly burned by hot engine the wheel is properly mounted to the vehicle. Any time a coolant (antifreeze) or steam from your radiator.
Page 566 564 WHAT TO DO IN EMERGENCIES NOTE: Dual wheels are flat mounted, center piloted. The lug nuts are a two-piece assembly. When the tires are being rotated or replaced, clean these lug nuts and add two drops of oil at the interface between the lug nut/bolt and the washer.
Page 567: Jacking And Tire Changing
WHAT TO DO IN EMERGENCIES 565 JACKING AND TIRE CHANGING Jacking And Tire Changing 1500 Series Trucks WARNING! • Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel.
Page 568 566 WHAT TO DO IN EMERGENCIES NOTE: If your vehicle is equipped with an air suspension system, there is a feature which allows the automatic leveling to be disabled to assist with changing a tire. If your vehicle is equipped with a touchscreen, this feature can be activated through the Uconnect system.
Page 569 WHAT TO DO IN EMERGENCIES 567 Remove the jack and tools by turning the wing bolt Release the tool bag straps from the jack and remove tools counterclockwise, remove the wing bolt and then slide the from bag. assembly out from under the seat. Jack And Tool Bag Jack And Tools (1500 Series)
Page 570 568 WHAT TO DO IN EMERGENCIES There are two ways to assemble the tools: CAUTION! Assembled For Spare Tire Lowering/Raising • The wheel wrench can only be attached to extension • When attaching the tool to the winch mechanism be sure the large flared end opening on extension 1 is positioned correctly over the winch mechanism ad- justing nut.
Page 571 WHAT TO DO IN EMERGENCIES 569 Assembled For Jack Operation WARNING! (Continued) sharp turns. A loose jack, tools, bracket or other objects in the vehicle may move around with force, resulting in serious injury. Removing The Spare Tire 1. Remove the spare tire before attempting to jack up the truck.
Page 572 570 WHAT TO DO IN EMERGENCIES Inserting The Jack Extension Tube Into The Access Hole Rotating The Wheel Wrench Handle 2. Rotate the wheel wrench handle counterclockwise until 3. Pull the spare tire out from under the vehicle to gain the spare tire is on the ground with enough cable slack access to the spare tire retainer.
Page 573 WHAT TO DO IN EMERGENCIES 571 Pulling The Spare Tire Out Gaining Access To The Retainer 4. Lift the spare tire with one hand to give clearance to tilt 5. Pull the retainer through the center of the wheel. the retainer at the end of the cable.
Page 574 572 WHAT TO DO IN EMERGENCIES WARNING! Do not attempt to change a tire on the side of the vehicle close to moving traffic, pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel. 2.
Page 575 WHAT TO DO IN EMERGENCIES 573 Jack Instructions (1500 Series) WARNING! (Continued) • If working on or near a roadway, be extremely WARNING! careful of motor traffic. • To assure that spare tires, flat or inflated, are securely Carefully follow these tire changing warnings to help prevent personal injury or damage to your vehicle: stowed, spares must be stowed with the valve stem •...
Page 576 574 WHAT TO DO IN EMERGENCIES CAUTION! Do not attempt to raise the vehicle by jacking on locations other than those indicated in the Jacking Instructions for this vehicle. 1. Remove the spare wheel, jack, and tools from storage. 2. Using the wheel wrench, loosen, but do not remove, the wheel nuts by turning them counterclockwise one turn while the wheel is still on the ground.
Page 577 WHAT TO DO IN EMERGENCIES 575 4X2 Front Jacking Location 4X4 Front Jacking Location Indicator 4x4 Series Trucks Front Jacking Location When changing a front wheel, place the scissor jack under the rear portion of the lower control arm as shown below. There is a jack location indicator on the rear portion of the lower control arm.
Page 578 576 WHAT TO DO IN EMERGENCIES 4X4 Front Jacking Location Rear Jacking Location 4x2 and 4x4 Rear Jacking Location Connect the jack tube extension and wheel wrench. Operate the jack using the jack drive tube and the wheel CAUTION! wrench. The tube extension may be used but is not required.
Page 579 WHAT TO DO IN EMERGENCIES 577 WARNING! WARNING! Raising the vehicle higher than necessary can make the A loose tire or jack thrown forward in a collision or vehicle unstable. It could slip off the jack and hurt hard stop could injure someone in the vehicle. Always someone near it.
Page 580 578 WHAT TO DO IN EMERGENCIES To Stow The Flat Or Spare NOTE: Vehicles equipped with aluminum wheels cannot be stored under the vehicle because the wheel retainer will not fit through the wheel pilot hole. Secure the flat tire in the bed of the truck.
Page 581 WHAT TO DO IN EMERGENCIES 579 Pushing The Retainer Through The Center Of The Wheel Wheel Wrench And Jack Extension Tube Assembled And And Positioning It In Position 3. Attach the wheel wrench to the jack extension tube with 4. Rotate the wheel wrench handle clockwise until the the curved angle facing away from the vehicle.
Page 582 580 WHAT TO DO IN EMERGENCIES Rotating The Wheel Wrench Handle Jack And Tool Bag NOTE: The winch mechanism is designed for use with the 3. Secure the tool bag straps to the jack. jack extension tube only. Use of an air wrench or other power tools is not recommended and can damage the winch.
Page 583 WHAT TO DO IN EMERGENCIES 581 Jack And Tools Tied Jack Hold Down Fastener 4. Place the jack and tools in the storage position holding NOTE: Ensure that the jack slides into the front hold down the jack by the jack turn-screw, slip the jack and tools location.
Page 584: Jacking And Tire Changing 2500 And 3500 Series Trucks
582 WHAT TO DO IN EMERGENCIES 5. Turn the wing bolt clockwise to secure to the floor pan. Jacking And Tire Changing 2500 And 3500 Series Reinstall the plastic cover. Trucks WARNING! • Do not attempt to change a tire on the side of the vehicle close to moving traffic.
Page 585 WHAT TO DO IN EMERGENCIES 583 Jack Location Remove the jack and tools by turning the wing bolt counterclockwise, remove the wing bolt and then slide the The jack and jack tools are stored under the front passenger assembly out from under the seat. seat.
Page 586 584 WHAT TO DO IN EMERGENCIES Remove the jack and tools from the bracket assembly. Turn There are two ways to assemble the tools: the jack-turn-screw counterclockwise to release jack from Assembled For Spare Tire Lowering/Raising bracket assembly. Assembled For Spare Tire Lowering/Raising Jack And Tools Bracket Assembly 1 —...
Page 587 WHAT TO DO IN EMERGENCIES 585 CAUTION! • The wheel wrench can only be attached to extension 3. • When attaching the tool to the winch mechanism be sure the large flared end opening on extension 1 is positioned correctly over the winch mechanism ad- justing nut.
Page 588 586 WHAT TO DO IN EMERGENCIES Removing The Spare Tire 2. Rotate the wheel wrench handle counterclockwise until the spare tire is on the ground with enough cable slack 1. Remove the spare tire before attempting to jack up the to allow you to pull it out from under the vehicle.
Page 589 WHAT TO DO IN EMERGENCIES 587 3. Pull the spare tire out from under the vehicle to gain access to the spare tire retainer. Gaining Access To The Retainer 5. Pull the retainer through the center of the wheel. Pulling The Spare Tire Out 4.
Page 590 588 WHAT TO DO IN EMERGENCIES WARNING! Do not attempt to change a tire on the side of the vehicle close to moving traffic, pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel. 2.
Page 591 WHAT TO DO IN EMERGENCIES 589 Jack Instructions (2500, 3500 Series) WARNING! (Continued) • If working on or near a roadway, be extremely WARNING! careful of motor traffic. • To assure that spare tires, flat or inflated, are securely Carefully follow these tire changing warnings to help prevent personal injury or damage to your vehicle: stowed, spares must be stowed with the valve stem •...
Page 592 590 WHAT TO DO IN EMERGENCIES NOTE: If your vehicle is equipped with hub caps/wheel covers they must be removed before raising the vehicle off the ground. Refer to ”Hub Caps/Wheel Covers — If Equipped” in this section. Lug Wrench Adaptor Shown In Jack And Tools Assembly CAUTION! Do not attempt to raise the vehicle by jacking on locations other than those indicated in the Jacking...
Page 593 WHAT TO DO IN EMERGENCIES 591 Front Jacking Location When changing the front wheel, assemble the jack drive tube to the jack and connect the drive tube to the extension tube. Place the jack under the axle as close to the tire as possible with the drive tubes extending to the front.
Page 594 592 WHAT TO DO IN EMERGENCIES Rear Jacking Location CAUTION! When changing a rear wheel, assemble the jack drive tube Before raising the wheel off the ground, make sure that to the jack and connect the drive tube to the extension tube. the jack will not damage surrounding truck parts and Place the jack under the axle between the spring and the adjust the jack position as required.
Page 595 WHAT TO DO IN EMERGENCIES 593 the inner wheel. The wheel nuts are a two-piece assem- bly with a flat face. Lightly tighten the wheel nuts. To avoid the risk of forcing the vehicle off the jack, do not fully tighten the wheel nuts until the vehicle has been lowered.
Page 596 594 WHAT TO DO IN EMERGENCIES WARNING! WARNING! A loose tire or jack thrown forward in a collision or A loose tire thrown forward in a collision or hard stop hard stop could injure someone in the vehicle. Always could injure the occupants in the vehicle. Have the stow the jack parts and the extra tire and wheel in the deflated (flat) tire repaired or replaced immediately.
Page 597 WHAT TO DO IN EMERGENCIES 595 2. Lift the spare tire with one hand to give clearance to tilt 3. Attach the wheel wrench to the jack extension tube with the retainer at the end of the cable and position it the curved angle facing away from the vehicle.
Page 598 596 WHAT TO DO IN EMERGENCIES 4. Rotate the wheel wrench handle clockwise until the Reinstalling The Jack And Tools (2500 And 3500 wheel is drawn into place against the underside of the Series) vehicle. Continue to rotate until you feel the winch 1.
Page 599 WHAT TO DO IN EMERGENCIES 597 3. Place the jack and tool bracket assembly in the storage position holding the jack by the jack turn-screw, slip the jack and tools under the seat so that the bottom slot engages into the fastener on the floor. Wing Bolt/Jack And Tools (2500/3500 Series) Hub Caps/Wheel Covers —...
Page 600: Hoisting
598 WHAT TO DO IN EMERGENCIES For single rear wheel (SRW) models, use the flat blade on each cap). Insert the flat tip completely and using a back the end of the lug wrench to pull the hub cap off. Insert the and forth motion, loosen the wheel skin.
Page 601: Jump-Starting Procedures
WHAT TO DO IN EMERGENCIES 599 JUMP-STARTING PROCEDURES NOTE: The positive battery post may be covered with a protective cap if equipped. Lift up on the cap to gain access If your vehicle has a discharged battery, it can be jump- to the positive battery post.
Page 602: Jump-Starting Procedure
600 WHAT TO DO IN EMERGENCIES WARNING! WARNING! • Take care to avoid the radiator cooling fan whenever Do not allow vehicles to touch each other as this could the hood is raised. It can start anytime the ignition establish a ground connection and personal injury switch is ON.
Page 603 WHAT TO DO IN EMERGENCIES 601 2. Connect the opposite end of the positive (+) jumper CAUTION! cable to the positive (+) post of the booster battery. Do not connect jumper cable to any of the fuses on the 3. Connect the negative (-) end of the jumper cable to the positive battery terminal.
Page 604: Freeing A Stuck Vehicle
602 WHAT TO DO IN EMERGENCIES NOTE: For trucks equipped with 8-speed automatic trans- CAUTION! mission: Shifts between DRIVE and REVERSE can only be achieved at wheel speeds of 5 mph (8 km/h) or less. Accessories plugged into the vehicle power outlets Whenever the transmission remains in NEUTRAL for more draw power from the vehicle’s battery, even when not than two seconds, you must press the brake pedal to...
Page 605: Emergency Tow Hooks - If Equipped
WHAT TO DO IN EMERGENCIES 603 EMERGENCY TOW HOOKS — IF EQUIPPED WARNING! Your vehicle may be equipped with emergency tow hooks. Fast spinning tires can be dangerous. Forces generated NOTE: For off-road recovery, it is recommended to use by excessive wheel speeds may cause damage, or even both of the front tow hooks to minimize the risk of damage failure, of the axle and tires.
Page 606: Gear Selector Override - 6-Speed Transmission
604 WHAT TO DO IN EMERGENCIES GEAR SELECTOR OVERRIDE — 6-SPEED TRANSMISSION If a malfunction occurs and the gear selector cannot be moved out of the PARK position, you can use one of the following procedures to temporarily move the gear selec- tor: Column Shifter —...
Page 607: Manual Park Release - 8 Speed Transmission
WHAT TO DO IN EMERGENCIES 605 4. Press and maintain firm pressure on the brake pedal. MANUAL PARK RELEASE — 8 SPEED TRANSMISSION 5. Insert the screwdriver or similar tool into the access hole, and push and hold the override release lever WARNING! down.
Page 608 606 WHAT TO DO IN EMERGENCIES In order to push or tow the vehicle in cases where the 3. Using the screwdriver or similar tool, push the Manual transmission will not shift out of PARK (such as a dead Park Release lever locking tab (just below the middle of battery), a Manual Park Release is available.
Page 609: Towing A Disabled Vehicle
WHAT TO DO IN EMERGENCIES 607 TOWING A DISABLED VEHICLE NOTE: Vehicles equipped with air suspension must be placed in Transport mode, before tying them down (from This section describes procedures for towing a disabled the body) on a trailer or flatbed truck. Refer to Air vehicle using a commercial towing service.
Page 610: Two-Wheel Drive Models
608 WHAT TO DO IN EMERGENCIES Proper towing or lifting equipment is required to prevent Two-Wheel Drive Models damage to your vehicle. Use only tow bars and other The manufacturer recommends towing your vehicle with equipment designed for this purpose, following equipment all four wheels OFF the ground using a flatbed.
Page 611: Four-Wheel Drive Models
WHAT TO DO IN EMERGENCIES 609 CAUTION! CAUTION! • Front or rear wheel lifts must not be used. Internal Towing this vehicle in violation of the above require- ments can cause severe engine and/or transmission damage to the transmission or transfer case will damage.
Page 612: Event Data Recorder (Edr)
610 WHAT TO DO IN EMERGENCIES EVENT DATA RECORDER (EDR) This vehicle is equipped with an Event Data Recorder (EDR). The main purpose of an EDR is to record, in certain crash or near crash-like situations, such as an air bag deployment or hitting a road obstacle, data that will assist in understanding how a vehicle’s systems performed.
Page 613 MAINTAINING YOUR VEHICLE CONTENTS ▫ Accessory Drive Belt Inspection ... .625 ENGINE COMPARTMENT — 3.6L ...613 ▫ Maintenance-Free Battery ....626 ENGINE COMPARTMENT —...
Page 614 612 MAINTAINING YOUR VEHICLE ▫ Appearance Care And Protection From ▫ Center High-Mounted Stoplamp (CHMSL) With Corrosion ......651 Cargo Lamp .
Page 615: Engine Compartment - 3.6L
MAINTAINING YOUR VEHICLE 613 ENGINE COMPARTMENT — 3.6L 1 — Air Cleaner Filter 6 — Washer Fluid Reservoir 2 — Engine Oil Dipstick 7 — Power Distribution Center (Fuses) 3 — Engine Oil Fill 8 — Coolant Pressure Cap 4 — Brake Fluid Reservoir 9 —...
Page 616: Engine Compartment - 5.7L
614 MAINTAINING YOUR VEHICLE ENGINE COMPARTMENT — 5.7L 1 — Air Cleaner Filter 7 — Washer Fluid Reservoir 2 — Automatic Transmission Dipstick (6-Speed Trans Only) 8 — Power Distribution Center (Fuses) 3 — Engine Oil Fill 9 — Power Steering Fluid Reservoir (2500/3500 Models Only) 4 —...
Page 617: Engine Compartment - 6.4L
MAINTAINING YOUR VEHICLE 615 ENGINE COMPARTMENT — 6.4L 1 — Coolant Pressure Bottle 6 — Battery 2 — Transmission Dipstick 7 — Power Distribution Center (Fuses) 3 — Engine Oil Fill 8 — Washer Solvent 4 — Engine Oil Dipstick 9 —...
Page 618: Onboard Diagnostic System (Obd Ii)
616 MAINTAINING YOUR VEHICLE ONBOARD DIAGNOSTIC SYSTEM (OBD II) CAUTION! (Continued) Your vehicle is equipped with a sophisticated onboard • If the MIL is flashing, while the engine is running, diagnostic system called OBD II. This system monitors the severe catalytic converter damage and power loss performance of the emissions, engine, and automatic trans- will soon occur.
Page 619: Loose Fuel Filler Cap Message
MAINTAINING YOUR VEHICLE 617 A loose, improperly installed, or damaged fuel filler cap WARNING! (Continued) may also turn on the Malfunction Indicator Light (MIL). vehicle control could occur that may result in an accident involving serious injury or death. EMISSIONS INSPECTION AND MAINTENANCE •...
Page 620: Replacement Parts
618 MAINTAINING YOUR VEHICLE 1. Cycle the ignition to the ON mode, but do not crank or as you normally would in order for your OBD II system to start the engine. update. A recheck with the above test routine may then indicate that the system is now ready.
Page 621: Maintenance Procedures
MAINTAINING YOUR VEHICLE 619 NOTE: Intentional tampering with emissions control sys- CAUTION! (Continued) tems may void your warranty and could result in civil more costly repairs, damage to other components or penalties being assessed against you. negatively impact vehicle performance. Immediately have potential malfunctions examined by an autho- WARNING! rized dealer or qualified repair center.
Page 622 620 MAINTAINING YOUR VEHICLE Checking the oil while the vehicle is on level ground will 2500 – 3500 Models Only improve the accuracy of the oil level readings. Always NOTE: Under no circumstances should oil change inter- maintain the oil level within the SAFE zone on the dipstick. vals exceed 8,000 miles (13,000 km), twelve months or 350 Adding one quart of oil when the reading is at the bottom hours of engine run time, whichever comes first.
Page 623 MAINTAINING YOUR VEHICLE 621 Engine Oil Viscosity (SAE Grade) — 5.7L Engine CAUTION! (1500/2500/3500 Models) Do not use chemical flushes in your engine oil as the Mopar SAE 5W-20 engine oil approved to FCA Material chemicals can damage your engine. Such damage is not Standard MS-6395 such as Pennzoil, Shell Helix or equiva- covered by the New Vehicle Limited Warranty.
Page 624: Engine Oil Filter
622 MAINTAINING YOUR VEHICLE Lubricants which do not have both the engine oil certifi- Engine Oil Filter Selection cation mark and the correct SAE viscosity grade number This manufacturer’s engines have a full-flow type oil filter. should not be used. Use a filter of this type for replacement.
Page 625 MAINTAINING YOUR VEHICLE 623 Engine Air Cleaner Filter Selection The quality of replacement engine air cleaner filters varies considerably. Only high quality filters should be used to assure most efficient service. Mopar engine air cleaner filters are a high quality filter and are recommended. Engine Air Cleaner Filter Inspection and Replacement Inspect engine air cleaner filter for dirt and or debris, if you...
Page 626 624 MAINTAINING YOUR VEHICLE 6.4L Air Cleaner Filter Cover Open Air Cleaner Filter Assembly 1 — Clean Air Hose Clamp 1 — Air Cleaner Cover 2 — Spring Clips 2 — Air Cleaner Filter 2. Lift the air cleaner cover to access the air cleaner filter. 3.
Page 627: Accessory Drive Belt Inspection
MAINTAINING YOUR VEHICLE 625 2. Install the air cleaner cover onto the housing assembly locating tabs. 3. Latch the spring clips and lock the air cleaner cover to the housing assembly. Accessory Drive Belt Inspection WARNING! • Do not attempt to inspect an accessory drive belt with vehicle running.
Page 628: Maintenance-Free Battery
626 MAINTAINING YOUR VEHICLE • Longitudinal belt cracking (cracks between two ribs) When inspecting accessory drive belts, small cracks that run across ribbed surface of belt from rib to rib, are • Belt slips considered normal. These are not a reason to replace belt. •...
Page 629: Air Conditioner Maintenance
MAINTAINING YOUR VEHICLE 627 WARNING! CAUTION! (Continued) negative post. Battery posts are marked positive (+) • Battery fluid is a corrosive acid solution and can and negative (-) and are identified on the battery burn or even blind you. Do not allow battery fluid to case.
Page 630 628 MAINTAINING YOUR VEHICLE Protection Agency and is an ozone-saving product. How- WARNING! (Continued) ever, the manufacturer recommends that air conditioning system. Some unapproved refrigerants are flam- service be performed by authorized dealer or other service mable and can explode, injuring you. Other unap- facilities using recovery and recycling equipment.
Page 631 MAINTAINING YOUR VEHICLE 629 WARNING! Do not remove the cabin air filter while the vehicle is running, or while the ignition is in the ACC or ON/ RUN mode. With the cabin air filter removed and the blower operating, the blower can contact hands and may propel dirt and debris into your eyes, resulting in personal injury.
Page 632 630 MAINTAINING YOUR VEHICLE 3. There are glove compartment travel stops on both sides 4. Disengage the glove compartment door from its hinges of the glove compartment door, push inward on both by opening the glove compartment past the travel stop sides of the glove compartment to release the glove and pulling it toward you.
Page 633 MAINTAINING YOUR VEHICLE 631 Finger Tabs Finger Tab...
Page 634 632 MAINTAINING YOUR VEHICLE 6. Remove the cabin air filter by pulling it straight out of 8. Reinstall the glove compartment on the hinges. the housing. Glove Compartment Installation Cabin Air Filter 9. Pull the tension tether outward and reinstall the glove 7.
Page 635: Front Driveshaft Lubrication - 2500/3500
MAINTAINING YOUR VEHICLE 633 Front Driveshaft Lubrication — 2500/3500 (Four-Wheel Drive Models Only) Lubricate the front driveshaft grease fitting at each oil change. Right Side Of Glove Compartment 1 — Glove Compartment Tension Tether 2 — Glove Compartment Travel Stop NOTE: Ensure the glove compartment door hinges and Front Drive Shaft Double Cardan Joint glove compartment travel stops are fully engaged.
Page 636: Body Lubrication
634 MAINTAINING YOUR VEHICLE The grease fitting is located at the rear of the front Body Lubrication driveshaft, near the centering mechanism of double cardan Locks and all body pivot points, including such items as joint. Refer to the “Maintenance Schedule” for the proper seat tracks, door hinge pivot points and rollers, liftgate, maintenance intervals.
Page 637: Windshield Wiper Blades
MAINTAINING YOUR VEHICLE 635 • Hardening Or Cracking Windshield Wiper Blades • Deformation Or Fatigue Clean the rubber edges of the wiper blades and the windshield periodically with a sponge or soft cloth and a If a wiper blade or wiper arm is damaged, replace the mild nonabrasive cleaner.
Page 638 636 MAINTAINING YOUR VEHICLE 1. Lift the wiper arm to raise the wiper blade off of the 2. To disengage the wiper blade from the wiper arm, flip glass, until the wiper arm is in the full up position. up the locking tab. Windshield Wiper Arm Wiper Locking Assembly 1 —...
Page 639 MAINTAINING YOUR VEHICLE 637 3. Tilt the lower end of the wiper blade away from the arm wiper arm with the other hand (move the wiper blade and use one finger push the release tab toward the down toward the base of the wiper arm and away from wiper arm.
Page 640: Adding Washer Fluid
638 MAINTAINING YOUR VEHICLE Installing The Front Wipers exceeds the temperature range of your climate. This rating information can be found on most washer fluid containers. 1. Lift the wiper arm off of the glass, until the wiper arm is in the full up position.
Page 641 MAINTAINING YOUR VEHICLE 639 have an authorized technician inspect the complete ex- CAUTION! haust system and adjacent body areas for broken, dam- • The catalytic converter requires the use of unleaded aged, deteriorated, or mispositioned parts. Open seams or loose connections could permit exhaust fumes to seep into fuel only.
Page 642: Cooling System
640 MAINTAINING YOUR VEHICLE In unusual situations involving grossly malfunctioning WARNING! (Continued) engine operation, a scorching odor may suggest severe and see or hear steam coming from under the hood, do not abnormal catalyst overheating. If this occurs, stop the open the hood until the radiator has had time to cool.
Page 643 MAINTAINING YOUR VEHICLE 641 Cooling System — Drain Flush And Refill CAUTION! (Continued) If the engine coolant (antifreeze) is dirty or contains a Additive Technology (HOAT) engine coolant (anti- considerable amount of sediment, clean and flush with a freeze) or any “globally compatible” coolant (anti- reliable cooling system cleaner.
Page 644 642 MAINTAINING YOUR VEHICLE (240,000 km) before replacement. To prevent reducing this NOTE: extended maintenance period, it is important that you use • It is the owner’s responsibility to maintain the proper the same engine coolant (OAT coolant conforming to level of protection against freezing according to the MS.90032) throughout the life of your vehicle.
Page 645 MAINTAINING YOUR VEHICLE 643 The cap should be inspected and cleaned if there is any Checking Coolant Level — 3.6L and 5.7L Engines accumulation of foreign material on the sealing surfaces. With the engine OFF and cold, the level of the engine coolant should be between the ADD and SAFE range on WARNING! the dipstick.
Page 646 644 MAINTAINING YOUR VEHICLE 2. Lift and remove the plastic dipstick from the reservoir When additional engine coolant (antifreeze) is needed to neck. maintain the proper level, it should be added to the coolant bottle. Do not overfill. Checking Coolant Level — 6.4L Engine The level of the coolant in the pressurized coolant bottle should be between the “MIN”...
Page 647: Brake System
MAINTAINING YOUR VEHICLE 645 Points To Remember MS.90032) and distilled water for proper corrosion pro- tection of your engine which contains aluminum com- NOTE: When the vehicle is stopped after a few miles/ ponents. kilometers of operation, you may observe vapor coming •...
Page 648 646 MAINTAINING YOUR VEHICLE Use only the manufacturer’s recommended brake fluid. WARNING! Refer to “Fluids, Lubricants, And Genuine Parts” in “Main- taining Your Vehicle” for further information. Riding the brakes can lead to brake failure and possi- bly a collision. Driving with your foot resting or riding WARNING! on the brake pedal can result in abnormally high brake temperatures, excessive lining wear, and possible...
Page 649: Rear Axle And 4X4 Front Driving Axle Fluid Level
MAINTAINING YOUR VEHICLE 647 For all 2500/3500 Model axles, the fluid level should be 1/4 WARNING! (Continued) in ± 1/4 in (6.4 mm ± 6.4 mm) below the fill hole on the 9.25 • Overfilling the brake fluid reservoir can result in in front and 3/4 in ±...
Page 650: Transfer Case
648 MAINTAINING YOUR VEHICLE Additive should be added to the gear lubricant whenever Automatic Transmission a fluid change is made to an axle equipped with a Limited Selection Of Lubricant Slip Differential. It is important to use the proper transmission fluid to 2500/3500 Model axles DO NOT REQUIRE any limited ensure optimum transmission performance and life.
Page 651 MAINTAINING YOUR VEHICLE 649 Special Additives If you notice fluid leakage or transmission malfunction, visit your authorized dealer immediately to have the The manufacturer strongly recommends against using any transmission fluid level checked. Operating the vehicle special additives in the transmission. Automatic Transmis- with an improper fluid level can cause severe transmission sion Fluid (ATF) is an engineered product and its perfor- damage.
Page 652 650 MAINTAINING YOUR VEHICLE Use the following procedure to check the transmission is a solid coating of oil on both sides of the dipstick. fluid level properly: Note that the holes in the dipstick will be full of fluid if the actual level is at or above the hole.
Page 653: Appearance Care And Protection From Corrosion
MAINTAINING YOUR VEHICLE 651 Routine fluid and filter changes are not required. However, CAUTION! change the fluid and filter if the fluid becomes contami- nated (with water, etc.), or if the transmission is disas- If the fluid temperature is below 50 °F (10 °C) it may sembled for any reason.
Page 654 652 MAINTAINING YOUR VEHICLE • Use a high quality cleaner wax, such as Mopar Cleaner The following maintenance recommendations will enable you to obtain maximum benefit from the corrosion resis- Wax to remove road film, stains and to protect your tance built into your vehicle.
Page 655 MAINTAINING YOUR VEHICLE 653 • If you detect any stone chips or scratches in the paint, Your wheels are susceptible to deterioration caused by salt, touch them up immediately. The cost of such repairs is sodium chloride, magnesium chloride, calcium chloride, considered the responsibility of the owner.
Page 656 654 MAINTAINING YOUR VEHICLE When cleaning extremely dirty wheels including excessive Dark Vapor Or Black Satin Chrome Wheels brake dust, care must be taken in the selection of tire and wheel cleaning chemicals and equipment to prevent dam- CAUTION! age to the wheels. Mopar Wheel Treatment or Mopar If your vehicle is equipped with Dark Vapor or Black Chrome Cleaner or their equivalent is recommended or Satin Chrome wheels DO NOT USE wheel cleaners,...
Page 657 MAINTAINING YOUR VEHICLE 655 • For grease stains, apply Mopar Multi-Purpose Cleaner WARNING! to a clean, damp cloth and remove stain. Use a fresh, damp towel to remove soap residue. Do not use volatile solvents for cleaning purposes. Many are potentially flammable, and if used in closed •...
Page 658 656 MAINTAINING YOUR VEHICLE To minimize the possibility of scratching the lenses and 1. Clean with a wet soft cloth. A mild soap solution may be reducing light output, avoid wiping with a dry cloth. To used, but do not use high alcohol content or abrasive remove road dirt, wash with a mild soap solution followed cleaners.
Page 659 MAINTAINING YOUR VEHICLE 657 least twice per year using the Mopar Spray-On Bedliner WARNING! Conditioner available at your local authorized dealer. A frayed or torn belt could rip apart in a collision and To Help Maintain The Appearance Of Your Spray-On leave you with no protection.
Page 660: Fuses
658 MAINTAINING YOUR VEHICLE Spray-On Bedliners are chemically-resistant to many dif- WARNING! (Continued) ferent types of chemicals (including gasoline, oil, hydraulic fuse of higher amp rating. Never replace a blown fluids) for short periods of time. If a spill occurs on your fuse with metal wires or any other material.
Page 661: Power Distribution Center
MAINTAINING YOUR VEHICLE 659 Power Distribution Center The Power Distribution Center is located in the engine compartment near the battery. This center contains car- tridge fuses, micro fuses, relays, and circuit breakers. A description of each fuse and component may be stamped on the inside cover, otherwise the cavity number of each fuse is stamped on the inside cover that corresponds to the following chart.
Page 662 660 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse Micro Fuse Description 20 Amp Blue (1500 – Emissions Diesel – If Equipped LD/Cummins Die- sel) 40 Amp Green (Spe- – Diesel Fuel Heater – If Equipped cial Services Vehicle & Cummins Diesel) 40 Amp Green –...
Page 663 MAINTAINING YOUR VEHICLE 661 Cavity Cartridge Fuse Micro Fuse Description 20 Amp Blue – Engine Control Module 30 Amp Pink (Cum- mins Diesel) 30 Amp Pink – Body Controller #1 / Interior Lighting 30 Amp Pink – Driver Door Module 30 Amp Pink –...
Page 664 662 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse Micro Fuse Description 30 Amp Pink – Power Inverter 115V AC – If Equipped 20 Amp Blue – Power Outlet – Special Services Only – 10 Amp Red Active Grill Shutter – If Equipped –...
Page 665 MAINTAINING YOUR VEHICLE 663 Cavity Cartridge Fuse Micro Fuse Description – 15 Amp Blue Underhood Lamp – 10 Amp Red (1500 PM Sensor – If Equipped LD Diesel & Cum- mins Diesel) – 10 Amp Red Air Conditioning Clutch – 20 Amp Yellow Ignition Coils (Gas), Urea Heater (Cummins Diesel)
Page 666 664 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse Micro Fuse Description – 20 Amp Yellow (Gas Brake Vacuum Pump Gas/Diesel – If Engine & 1500 LD Equipped Diesel) – 10 Amp Red Coolant Temperature Valve Actuator – 10 Amp Red Antilock Brakes / Electronic Stability Control –...
Page 667 MAINTAINING YOUR VEHICLE 665 Cavity Cartridge Fuse Micro Fuse Description F90/F91 – 20 Amp Yellow Power Outlet (Rear Seats) Customer Select- able – 20 Amp Yellow Cigar Lighter – 10 Amp Red Shifter / Transfer Case Module – 10 Amp Red Rear Camera / Park Assist –...
Page 668: Vehicle Storage
666 MAINTAINING YOUR VEHICLE REPLACEMENT BULBS CAUTION! (Continued) All of the inside bulbs are brass or glass-wedge base. • When replacing a blown fuse, it is important to use Aluminum base bulbs are not approved. only a fuse having the correct amperage rating. The use of a fuse with a rating other than indicated may Interior Bulbs result in a dangerous electrical system overload.
Page 669: Bulb Replacement
MAINTAINING YOUR VEHICLE 667 Bulb Number Bulb Number Premium Bi Halogen Pro- 9005LL Lamp jector Headlamp - High Side Marker Lamps (Dual Beam Rear Wheels) Front Turn Signal Lamp LED (Serviced at autho- Backup Lamp (Premium Headlamp) rized dealer) Rear License Plate Lamp Fog Lamp (Horizontal 9145 shape)
Page 670 668 MAINTAINING YOUR VEHICLE 4. Remove the two plastic push-in rivets that secure the 8. Reach through the access hole of the wheel house splash upper radiator seal to the radiator. shield and lift the slide lock upward far enough to disengage it from the lock post on the back of the front 5.
Page 671: Fog Lamps - If Equipped
MAINTAINING YOUR VEHICLE 669 CAUTION! CAUTION! • Do not contaminate the bulb glass by touching it Do not contaminate the bulb glass by touching it with with your fingers or by allowing it to contact other your fingers or by allowing it to contact other oily oily surfaces.
Page 672: Center High-Mounted Stoplamp (Chmsl) With Cargo Lamp
670 MAINTAINING YOUR VEHICLE 2. Pull the outboard side of the lamp rearward far enough CAUTION! to unsnap the two receptacles on the outboard side of the lamp housing from the two plastic snap post retain- Do not contaminate the bulb glass by touching it with ers in the outer box side panel.
Page 673 MAINTAINING YOUR VEHICLE 671 2. Separate the connector holding the housing and wiring harness to the body. CHMSL Bulb And Socket CAUTION! CHMSL Connector Location 3. Turn the desired bulb socket ¼ turn and remove the Do not contaminate the bulb glass by touching it with your fingers or by allowing it to contact other oily socket and bulb from housing.
Page 674: Cab Top Clearance Lamps - If Equipped
672 MAINTAINING YOUR VEHICLE Cab Top Clearance Lamps — If Equipped 1. Remove the two screws from the top of the lamp. Removing Bulb Socket From Clearance Lamp 3. Pull the bulb straight from it’s socket and replace. Removing Rear Screw From Clearance Lamp 2.
Page 675: Rear Lamp Bar Id Marker (Dual Rear Wheels) - If Equipped
MAINTAINING YOUR VEHICLE 673 Removing The Bulb From The Bulb Socket Screw Locations Rear Lamp Bar ID Marker (Dual Rear Wheels) — If 2. Turn the socket ¼ turn counterclockwise to access the Equipped bulb. 1. Loosen the two screws and the housing to gain access to 3.
Page 676: Side Marker Lamps (Dual Rear Wheels) - If Equipped
674 MAINTAINING YOUR VEHICLE Side Marker Lamps (Dual Rear Wheels) — If 3. Turn the socket ¼ turn counterclockwise and remove from assembly to access the bulb. Equipped 4. Pull the bulb straight out from socket. 5. Reverse the procedure for installation of the bulbs and housing.
Page 677 MAINTAINING YOUR VEHICLE 675 U.S. Metric 2500/3500 Shortbed Models 31 Gallons 117 Liters 2500/3500 Longbed Models 32 Gallons 121 Liters Engine Oil With Filter 3.6L Engine (We recommend you use SAE 5W-20, API Certified) 6 Quarts 5.6 Liters 5.7L Engines (We recommend you use SAE 5W-20, API Certified) 7 Quarts 6.6 Liters 6.4L Engines (We recommend you use SAE 0W-40 engine oil meeting...
Page 678: Fluids, Lubricants, And Genuine Parts
676 MAINTAINING YOUR VEHICLE FLUIDS, LUBRICANTS, AND GENUINE PARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant We recommend you use Mopar Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Tech- nology). Engine Oil – 3.6L Engine We recommend you use API Certified SAE 5W-20 Engine Oil, meeting the requirements of FCA Material Standard MS-6395 such as Mopar, Pennzoil, and Shell Helix.
Page 679 MAINTAINING YOUR VEHICLE 677 Component Fluid, Lubricant, or Genuine Part Engine Oil – 6.4L For best performance and maximum protection under all types of operating conditions, the manufacturer only rec- ommends full synthetic engine oils that meet the American Petroleum Institute (API) categories of SN. The manufac- turer recommends the use of Pennzoil Ultra 0W-40 or equivalent Mopar engine oil meeting the requirements of FCA Material Standard MS-12633 for use in all operating...
Page 680: Chassis
678 MAINTAINING YOUR VEHICLE CAUTION! (Continued) drained, flushed, and refilled with fresh OAT coolant (conforming to MS.90032), by an authorized dealer as soon as possible. • Do not use water alone or alcohol-based engine coolant (antifreeze) products. Do not use additional rust inhibitors or antirust products, as they may not be compatible with the radiator engine coolant and may plug the radiator.
Page 681 MAINTAINING YOUR VEHICLE 679 Component Fluid, Lubricant, or Genuine Part Transfer Case We recommend you use Mopar BW44–44 Transfer Case Fluid. Front Axle – 1500 Four-Wheel Drive Models We recommend you use Mopar GL-5 Synthetic Axle Lubri- cant SAE 75W-85. Rear Axle –...
Page 683 MAINTENANCE SCHEDULES CONTENTS ▫ Maintenance Chart .....683 MAINTENANCE SCHEDULE ....682...
Page 684 682 MAINTENANCE SCHEDULES MAINTENANCE SCHEDULE 1500 Models Only Your vehicle is equipped with an automatic oil change NOTE: Under no circumstances should oil change inter- indicator system. The oil change indicator system will vals exceed 10,000 miles (16,000 km), twelve months or 350 remind you that it is time to take your vehicle in for hours of engine run time, whichever comes first.
Page 685 MAINTENANCE SCHEDULES 683 Once A Month Or Before A Long Trip: At Every Oil Change Interval As Indicated By Oil • Check engine oil level Change Indicator System: • Change oil and filter. • Check windshield washer fluid level • Rotate the tires. Rotate at the first sign of irregular •...
Page 686 684 MAINTENANCE SCHEDULES Mileage or time passed (which- ever comes first) Or Years: Or Kilometers: Additional Inspections Inspect the CV/Universal joints. Inspect front suspension, tie rod ends, and replace if necessary. 1500 Models: Inspect the front and rear axle sur- faces.
Page 687 MAINTENANCE SCHEDULES 685 Mileage or time passed (which- ever comes first) Or Years: Or Kilometers: Adjust parking brake as necessary. Inspect transfer case fluid. Additional Maintenance Replace cabin air filter. Replace engine air filter. Replace spark plugs. ** Flush and replace the engine cool- ant at 10 years or 150,000 miles (240,000 km) whichever comes first.
Page 688 686 MAINTENANCE SCHEDULES Mileage or time passed (which- ever comes first) Or Years: Or Kilometers: Inspect the transfer case fluid, change for any of the following: police, taxi, fleet, or frequent trailer towing. Change the transfer case fluid. Inspect and replace PCV valve if necessary.
Page 689 IF YOU NEED CONSUMER ASSISTANCE CONTENTS ▫ Customer Assistance For The Hearing Or Speech SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR VEHICLE ......688 Impaired (TDD/TTY) .
Page 690: Suggestions For Obtaining Service For Your Vehicle
688 IF YOU NEED CONSUMER ASSISTANCE SUGGESTIONS FOR OBTAINING SERVICE FOR IF YOU NEED ASSISTANCE YOUR VEHICLE The manufacturer and its authorized dealer are vitally interested in your satisfaction. We want you to be happy Prepare For The Appointment with our products and services. If you are having warranty work done, be sure to bring the right papers with you, as well as your warranty folder.
Page 691: Fca Usa Llc Customer Center
IF YOU NEED CONSUMER ASSISTANCE 689 Any communication to the manufacturer’s customer center Mexico, D. F. should include the following information: In Mexico City: 5081-7568 • Owner’s name and address Outside Mexico City: 1-800-505-1300 • Owner’s telephone number (home and office) Puerto Rico And U.S.
Page 692: Service Contract
690 IF YOU NEED CONSUMER ASSISTANCE Canadian residents with hearing difficulties that require Limited Warranty expires, please refer to the contract assistance can use the special needs relay service offered by documents, and contact the person listed in those docu- Bell Canada.
Page 693: Warranty Information
IF YOU NEED CONSUMER ASSISTANCE 691 WARRANTY INFORMATION To contact NHTSA, you may call the Vehicle Safety Hotline toll free at 1-888-327-4236 (TTY: 1-800-424-9153); See the Warranty Information Booklet, for the terms and or go to http://www.safercar.gov; or write to: Admin- provisions of FCA US LLC warranties applicable to this istrator, NHTSA, 1200 New Jersey Avenue, SE., West vehicle and market.
Page 694 692 IF YOU NEED CONSUMER ASSISTANCE Service Manuals Owner’s Manuals These comprehensive Service Manuals provide the infor- These Owner’s Manuals have been prepared with the mation that students and professional technicians need in assistance of service and engineering specialists to acquaint diagnosing/troubleshooting, problem solving, maintain- you with specific FCA US LLC vehicles.
Page 695 INDEX...
Page 696 694 INDEX Adding Engine Coolant (Antifreeze) ... . .641 Air Conditioning, Operating Tips ... .336, 338 Adding Fuel ......529 Air Conditioning Refrigerant .
Page 697 INDEX 695 Fluid Type ......648, 678 Bulbs, Light ......96, 666 Shifting .
Page 698 696 INDEX How To Stow An Unused ALR Seat Belt ..80 Pressure Cap ......642 Infants And Child Restraints .
Page 699 INDEX 697 Key Fob ....... .31 Emergency, In Case Of Remote .
Page 700 698 INDEX Enhanced Accident Response Feature ..65, 609 Fluid Capacities......674 Entry System, Illuminated .
Page 701 INDEX 699 Fuel, Flexible......527 High Beam ......143 Fuses .
Page 702 700 INDEX Instrument Cluster ..... .240, 257 Keyless Entry System ......22 Instrument Cluster Display Key, Replacement .
Page 703 INDEX 701 Exterior ....... .96 Tires ........497 Fog .
Page 704 702 INDEX Mirrors........102 Filter ......622, 676 Electric Powered .
Page 705 INDEX 703 Passive Entry ......35 Pregnant Women And Seat Belts....52 Pedals, Adjustable .
Page 706 704 INDEX Refrigerant .......628 Safety Tips ....... .93 Reminder, Seat Belt .
Page 707 INDEX 705 Seats ......114, 115, 117, 121 Shift Lever Override ......604 Adjustment .
Page 708 706 INDEX Wheel, Tilt ......146 Compact Spare ......507 Steering Wheel Audio Controls .
Page 709 INDEX 707 Towing ......533, 607 Shifting .......371 Disabled Vehicle .
Page 710 708 INDEX Vehicle Identification Number (VIN)....7 Rear Sliding ......196 Vehicle Loading .
Page 711 INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this The antenna cable should be as short as practical and vehicle’s electronic system to provide immunity to radio routed away from the vehicle wiring when possible. Use frequency signals. Mobile two-way radios and telephone only fully shielded coaxial cable.

This manual is also suitable for:

Ram truck 25002017 Ram truck 35002017

Dodge RAM TRUCK 15002017 Owner's Manual

Introduction

Things to Know before Starting Your Vehicle

Understanding the Features of Your Vehicle

Understanding Your Instrument Panel

Starting and Operating

Quick Links

Chapters

Related Manuals for Dodge RAM TRUCK 15002017

Summary of Contents for Dodge RAM TRUCK 15002017