Dodge RAM TRUCK 1500 1995 Service Manual page 1647

23 -
22 DOOFtS
- ^ ^ . — . ^ ^ - ^ ^ — ^ — ^ ^ ^ ^ ^ ^ . ^ ^ ^ . ^ ^ B R
DOOR
HANDLE
61ASSIEAR
RUN CHANNEL
GIASS FRONT
RUN CHANNEL
scum
J 9 4 2 3 - 4 4
Fig. 13 Door Glass Run Lower Channels
OUTSIDE
DOOi
HANDLE
REMOVAL
(1) Remove door trim panel.
(2) Remove water dam as necessary to gain access
to door handle.
(3) Roll glass up.
(4) Remove fastener access plug from door end
panel.
(5) Disengage clips holding latch and lock rods to
door latch,
(6) Separate latch and lock rods from door latch.
(7) Remove nuts holding outside door handle re­
taining bracket to door handle (Fig. 14).
(8) Separate retaining bracket from door.
(9) Separate outside door handle from vehicle.
INSTALLATION
Reverse the preceding operation.
DOOR LOCI CYLINDER
DOOR LOCK
CYLINDER-TO-
LATCH
NUT
DOOR
LATCH'
Fig. 14 Outside Door Handle
DOOR
H A N D L E
J9423-79
LOCK CYLINDER
LOCK RETAINING
CLIP
J9523-134
REMOVAL (FIG. 15)
(1) Remove outside door handle.
(2) Remove clip holding lock cylinder to outside
door handle.
(3) Pull door lock from door handle.
Fig. 15 Door Lock Cylinder
DOOR
LOCK
BUTTON
REMOVAL (FIG. 1B)
(1) Remove door trim panel.
(2) Remove water dam.
(3) Roll glass up.
(4) Disengage clip holding lock button rod to door
latch.
(5) Separate lock button and rod from vehicle.
INSTALLATION
Reverse the preceding operation.