Dodge RAM TRUCK 1500 1995 Service Manual page 1583

21 - 302 NP231 HD/NP241/NP241 HD TRANSFER CASE
RANGE SECTOR
FORK PIN SLOT
J9421-347
Fig. 89 Seating Range Fork And Hub
(10) Install sliding hub and retaining ring (Fig.
90). Be sure ring is fully seated before proceeding.
Fig. 90 Sliding Hub Retaining Ring Installation
(11) Install mode fork and shift rail in sliding
clutch (Fig. 91).
(12) Install mainshaft/mode fork assembly (Fig.
92). Guide mainshaft through hub and into input
gear and shift rail through range fork and into case
bore.
FRONT OUTPUT SHAFT, DRIVE CHAIN AND
SPROCKET INSTALLATION
(1) Install front output shaft in bearing (Fig. 93).
(2) Insert front sprocket in drive chain (Fig. 94).
Fig. 92 Installing Mainshaft And Mode Fork Assembly
Fig. 93 Front Output Shaft installation