Dodge RAM TRUCK 1500 1995 Service Manual page 1468

B R
42RH TRANSMISSION OVERHAUL 21 -185
BOOST TUBE BRACE
Fig. 104 Boost Valve Tube Brace (Double Tab Style)
BOOST LOWER
UPPER THIS END OF
HOUSING TUBE FIRST J932M47
Fig. 105 Boost Valve Tube Removal
in upper housing will remain in place and not fall
out when lower housing and transfer plate are re­
moved.
(20) Remove screws attaching valve body lower
housing to upper housing and transfer plate (Fig.
106). Note position of boost valve tube brace for
assembly reference.
(21) Remove lower housing and overdrive separa­
tor plate from transfer plate (Fig. 106).
OVERDRIVE TRANSFER
SEPARATOR PLATE AND
PLATE UPPER
LOWER
HOUSING J932M49
Fig. 106 Lower Housing Removal
(22) Remove transfer plate from upper . housing
(Fig. 107).
Fig. 107 Removing Transfer Plate From Upper
Housing
(23) Turn transfer plate over so upper housing sep­
arator plate is facing upward (Fig. 108).
(24) Remove brace plate from lower housing sepa­
rator plate and transfer plate (Fig. 108).
J9321-150 PLATE PLATE
Fig. 108 Brace Plate Removal
(25) Remove upper housing separator plate from
transfer plate (Fig. 109). Note position of filter in
separator plate for assembly reference.
(26) Remove rear clutch check ball from transfer
plate. Note check ball location for assembly ref­
erence before removing it (Fig. 110).
VALVE BODY UPPER HOUSING
DISASSEMBLY
(1) Note location of check balls in valve body upper
housing (Fig. 111). Then remove one large and six
smaller diameter check balls with magnet (total of 7
check balls are used).
(2) Remove E-clip that secure shuttle valve second­
ary spring on valve stem (Fig. 112).